Resumen del contenido incluido en la página 1
OPERATING MANUAL
Bluetooth Enabled Car Kit
Version 3.5
Resumen del contenido incluido en la página 2
OVERVIEW This unit uses Bluetooth technology that allows wireless communication among devices such as cellular phones. This is designed to be a totally wireless hands-free Car Kit. This will enable the user to communicate freely while driving, without holding the phone. This unit will work on all Bluetooth cellular phones provided that they respect the Bluetooth protocol. Figure 1 1 – Multi-function Button - Answer/Hang-up/Pairing/Voice R
Resumen del contenido incluido en la página 3
• Wireless Microphone Illustration Figure 3 Figure 2 REMARKS: § If microphone is not “ON” during a communication, the sound on the speaker will be attenuated. § In standby mode, the microphone will still have a small consumption (less than 1.8 microwatts). § On some versions, the indicator light will only turn ON for 2 seconds after the microphone is switched ON. If the light is red, this indicates low battery. § The microphone is activated by the Hands-F
Resumen del contenido incluido en la página 4
E. ANSWERING/RECEIVING A CALL When the phone is receiving a call, the phone ring tone will be heard on the Car Kit. Just press the multi-function button (1) on the main unit to answer the call. Pressing the button again will hang-up and terminate the call. (Please refer to Car Kit Operations for Popular Cell Phones section on page 4 for additional information). F. MAKING A CALL (Refer to Car Kit Operations For Popular Cell Phones section on page 4). Important Remarks: • On some v
Resumen del contenido incluido en la página 5
CAR KIT OPERATIONS FOR POPULAR CELL PHONES Note 1: If your phone is not included in the following list of this manual, kindly refer to the manual of your phone. Note 2: Softwares and menus could be modified by the cell phone’s manufacturers without prior notice. If the manual does not match with your cell phone operations, kindly refer to the manual of your cell phone. Note 3: Multi-pairing is now possible. Ericsson T39m ………………………………….……………………… 8 Sony Ericsson T68/T68
Resumen del contenido incluido en la página 6
Suggested Pairing Modes Pairing Mode Cell Phone Models Handsfree Headset Ericsson T39m Sony Ericsson T68 Sony Ericsson T68i (R6 and below) Sony Ericsson T68i (R7) Sony Ericsson P800 / P900 Sony Ericsson T610 Sony Ericsson T628 Sony Ericsson Z600 Sony Ericsson K700i Motorola E398 Motorola V80 Motorola V600 Nokia 6310/6310i Nokia 8910 Nokia 8910i Nokia 3650 Nokia 6230 Nokia 6650 Nokia 6600 Panasonic X70 Qtek2020 Sharp GX3
Resumen del contenido incluido en la página 7
USING WITH SONY ERICSSON T39m a. ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Press Menu Key. Scroll to Extras and press YES. Select Operation mode, YES. On, YES. 2. Continue pressing NO to exit. QUICK ACCESS: Press Menu followed by the sequence of numbers below. Extras Blue tooth Operation mode T39m 5 6 4 b. PAIRING TO THE CELLULAR PHONE 1. Bring the cellular phone a
Resumen del contenido incluido en la página 8
Voice dialing Refer to step f and g for the procedure when activating and recording for voice dialing. 1. Press the multi-function button once to activate the voice dialing. 2. A beep will then be heard on the Car Kit prompting the user to say the name of the person to call. 3. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated. 4. Press the multi
Resumen del contenido incluido en la página 9
QUICK ACCESS: Press Menu followed by the sequence of numbers below. Connect Blue tooth Options Operation mode T68 8 3 - 2 T68i 8 4 (or 3 for T68i R7) 4 1 b. PAIRING TO THE CELLULAR PHONE 1. Bring the cellular phone at about 20 cm from the Car Kit. 2. From the ON state, press the multi-function button for 10 seconds or until a distinctive three-tone sound will be heard and at the same time, the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue.
Resumen del contenido incluido en la página 10
2. A beep will then be heard on the Car Kit prompting the user to say the name of the person to call. 3. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated. 4. Press the button again to terminate the call. Redialing For T68i R6 and R7, press twice quickly the multi-function button. Call is automatically transferred to the Car Kit. e. AUDIO TR
Resumen del contenido incluido en la página 11
Resumen del contenido incluido en la página 12
Resumen del contenido incluido en la página 13
USING WITH SONY ERICSSON T610 a. ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Go to Menu by pressing the joystick. Scroll to Connectivity, SELECT. Select Bluetooth, SELECT. Turn On, SELECT. 2. Continue pressing to exit. b. PAIRING TO THE CELLULAR PHONE 1. Bring the cellular phone at about 20 cm from the Car Kit. 2. From the ON state, press the multi-function button fo
Resumen del contenido incluido en la página 14
e. AUDIO TRANSFER Audio Transfer can be done by pressing the multi-function button or accessing the cell phone’s menu during ongoing calls. f. REJECTING A CALL Press the multi-function button twice to reject the incoming call. g. ACTIVATING THE VOICE DIALING Use your phone when recording for the voice dialing. Before voice dialing, you must first turn on the name dialing function and record your voice. To turn voice dialing on and record number types: 1. Go to Menu by pressing
Resumen del contenido incluido en la página 15
5. Enter “0000” as the passkey then press OK. If the pairing is successful, the alternating red/blue lights will stop. 6. Continue pressing to exit from Menu. The unit is now ready to link calls from the phone directly to the Car Kit. An icon, will appear during the standby mode indicating that the Car Kit is linked with the phone. d. ANSWERING/RECEIVING A CALL When the phone is receiving a call, a ring tone will be heard on the Car Kit. 1. Just press the multi-function but
Resumen del contenido incluido en la página 16
USING WITH SONY ERICSSON Z600 a. ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Press Menu Key . Scroll to Connectivity, SELECT. Bluetooth, SELECT. Choose Turn ON, SELECT. 2. Continue pressing to exit. QUICK ACCESS: a. Press More key. b. Scroll to Turn On Blue tooth, SELECT. c. Continue pressing to exit. b. SETTING TO LOW POWER MODE 1. Press Menu Key
Resumen del contenido incluido en la página 17
2. A beep will then be heard on the Car Kit prompting the user to say the name of the person to call. 3. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated. 4. Press the button again to terminate the call. f. AUDIO TRANSFER Audio Transfer can be done by pressing the multi-function button or accessing the cell phone’s menu during ongoing calls.
Resumen del contenido incluido en la página 18
6. Enter “0000” as the passcode then press Ok. If pairing is successful, the alternating red/blue lights (Bluetooth Indicator) will stop and will change to plain blinking blue. 7. Your device name is now added under My devices tab. Highlight the newly paired device and then press Connect to completely establish connection between your mobile phone and your Car Kit. 8. When a statement appeared indicating that your device is connected, continue pressing to exit
Resumen del contenido incluido en la página 19
h. RECORDING FOR VOICE DIALING Note: Voice dialing entries must be stored in the phone’s memory (not on the SIM card!). 1. Press to access Main Menu. Scroll to Settings and press Select. Choose Voice control, Select. Voice dialing, Select. Edit names, Select. New voice, Add. (Contacts list will appear). 2. Choose among the contacts whichever you want to have a voice name/voice tag. When it’s highlighted, press Select. 3. Follow the instructions that will be displayed on s
Resumen del contenido incluido en la página 20
e. MAKING A CALL with the Car Kit on Normal dialing 1. Enter the contact number and press Call key. Audio will be heard on the Car Kit. 2. To terminate or hang-up the call, shortly press the multi-function button. Voice dialing Make a phone call by saying a voice name / voice tag. But first refer to step h and i for the procedure when recording for voice dialing. 1. Press the multi-function button once to activate voice dialing. 2. A beep will then be heard o
