Resumen del contenido incluido en la página 1
GPS 300
GPS 300
User Manual
Resumen del contenido incluido en la página 2
WARNINGS A measure of knowledge by the user is required for proper and safe use of the Magellan GPS 300™. READ THE USER GUIDE & WARRANTY COMPLETELY. Use Good Judgment This product is an excellent navigation aid, but it does not replace the need for careful orientation and good judgment. Never rely solely on one device for navigating. Use Care to Avoid Inaccuracies The Global Positioning System (GPS) is operated by the U.S. Government, which is solely responsible for the accuracy and the maintena
Resumen del contenido incluido en la página 3
TABLE OF CONTENTS Introduction .................................................... 1 Welcome to the Magellan GPS 300 ..................................... 1 GPS 300 Description ........................................................... 1 Magellan GPS 300 ............................................................... 2 Getting Started ................................................ 3 Installing the Batteries ......................................................... 3 Getting Signals from Sate
Resumen del contenido incluido en la página 4
Working with Routes..................................... 17 Creating a Route ................................................................ 17 Viewing a Route ................................................................ 19 Activating/Deactivating a Route ........................................ 20 Deleting a Route ................................................................ 21 Appending a Leg to a Route ............................................... 21 Activating a Leg in a Route ....
Resumen del contenido incluido en la página 5
Introduction Welcome to the Magellan GPS 300 Congratulations on your purchase of the Magellan GPS 300 satellite navigator. The GPS 300 is an easy-to-use GPS receiver designed to get you out in the “Great Outdoors” rather than spending hours reading a User’s Manual. There are, however, a few items that you need to be familiar with so it is suggested that you follow along at least through the chapter on Basic Operation. Before you begin, make sure that your package includes the items listed on t
Resumen del contenido incluido en la página 6
Magellan GPS 300 GPS Antenna The ENTER key confirms data The GOTO key is entries or menu used to create a selections. direct route to any landmark stored in memory. The NAV key accesses the The MENU key is Position and used to access the Navigation route, landmark and screens. setup functions. The MARK key is The PWR key used to create turns the receiver landmarks and store on and off. the current position. The ARROW pad is used to The LIGHT key turns enter landmark names, and the light on and o
Resumen del contenido incluido en la página 7
Resumen del contenido incluido en la página 8
Resumen del contenido incluido en la página 9
4 ENTER ELEVATION. Use the ARROW pad to enter the approximate elevation for your position. If unknown, leave the elevation at 0. Press ENTER . 5 ENTER TIME. Use the ARROW pad to enter your present time. Press ENTER . 6 ENTER DATE. Use the ARROW pad to enter the date. ENTER Press . The GPS 300 then displays the POSITION screen and automatically begins searching for satellites that it knows are in this area for the date and time you entered. The display shown here may differ from yours depen
Resumen del contenido incluido en la página 10
completed the initialization process or have just turned your GPS 300 on, the GPS 300 will display the following screens in the order shown. As the GPS 300 searches for satellites, some of the small circles around the large circle will become black indicating that the GPS 300 is tracking that satellite and receiving information. The number at the bottom right of the screen displays how many satellites are being tracked. After the GPS receiver has received positioning data from at least three sa
Resumen del contenido incluido en la página 11
Basic Operation Saving a Position Fix Position fixes can be saved in memory for use later when you want to return to that position. Saved position fixes are referred to as landmarks or LMK. To save (mark) your current position press MARK . Receiver-Generated Name: The GPS 300 prompts you to enter a name or accept the receiver-generated name for this landmark. To accept the receiver-generated name (LM01 - LM99), press ENTER . User-Created Name: To create a name (up to four charac- ters), use t
Resumen del contenido incluido en la página 12
Creating a Landmark To create a landmark at a location which is not your current position, use the same procedure as saving a position with the additional step of inputting different latitude/longitude coordinates. To create a landmark press MARK . The GPS 300 prompts you to enter a name or accept the receiver- generated name for this landmark. When the desired name is displayed at the top of the screen press ENTER . Use the ARROW pad to change the latitude and press ENTER to accept. Use the ARR
Resumen del contenido incluido en la página 13
Viewing the POSITION Screen The POSITION screen displays the coordinates for your last computed position and information about any satellites that are visible. It can be accessed by pressing the key. NAV Latitude and Longitude North Indicator Satellite Satellite Elevation Pointer Degrees above the horizon of the satellite Number of indicated by the satellite satellites being pointer. used. Satellite Icons Tracking Indicator Visible but not tracked. Appears when the receiver has acquired enoug
Resumen del contenido incluido en la página 14
Viewing the Navigation Screens Without an Active Route. Without an active route the navigation screen displays your heading and the speed at which you are traveling. The lower portion of the screen displays a moving compass. The triangle at the top of the compass points in the direction you are traveling and the arrow points to north. Navigation Screen without an Active Route (Moving Compass) Current Speed Current Heading Direction of Travel North Indicator Tracking Indicator Appears when eno
Resumen del contenido incluido en la página 15
With an Active Route. When you have an active route the navigation screen still displays your heading and speed but also includes the bearing and distance to your destination. The moving compass is then replaced with steering informa- tion. You can use the graphical representation or the steering indicator to assist in directing you towards your final destina- tion. Navigation Screen with an Active Route (Steering) Destination Landmark Distance to Destination Bearing to Destination Current Spe
Resumen del contenido incluido en la página 16
A second navigational screen is also provided while you have an active route. This screen is very similar to the first screen except that the distance to the destination has been replaced with XTE (cross track error, the distance left or right that you are off course) and heading has been replaced with TTG (time to go). This screen provides you additional informa- tion to aid you in navigating to your destination. Second Navigation Screen with an Active Route (Steering) Cross Track Error Dista
Resumen del contenido incluido en la página 17
Creating a GOTO Route The simplest form of a route is a one-leg route called a GOTO route (you are GOing TO a destination). This is routing you from your current position to a landmark stored in memory All that is required to create a GOTO route is that you have saved a landmark indicating the location of your destination. To create (activate) a GOTO Route: From any screen, press GOTO . The GOTO screen appears. To select a different landmark, use the LEFT/RIGHT ARROWS until the desired desti
Resumen del contenido incluido en la página 18
If the receiver is not tracking sufficient satellites to compute a position fix, the start of the newly created GOTO route will be the last position computed, which may not be the current position. This GOTO route will remain the active route until a new GOTO route is created, a multileg route is activated, or the receiver is turned off. Turning off the receiver deactivates any GOTO route. Summary This completes the basic operation of the GPS 300. At this time it would be a good idea to put wh
Resumen del contenido incluido en la página 19
Working with Landmarks Viewing a Landmark To view a stored landmark press MENU until LMKS appears at the top of the screen. Press ENTER . The BEARING/DIS- TANCE screen for the first landmark in the receiver’s memory is displayed with the bearing and distance from the last computed position fix to that landmark. To select a different landmark, use the LEFT/RIGHT arrows until the name of the landmark you wish to view is at the top of the screen. To view the POSITION screen of the selected landma
Resumen del contenido incluido en la página 20
Editing the Landmark Name Following the instructions under Viewing a Landmark, use the LEFT/RIGHT arrows to select the landmark whose name you wish to edit. Press the UP ARROW until the screen displays ENT TO EDIT NAME, then press ENTER . The GPS 300 then allows you to change the name of the landmark using the ARROW pad. When you have entered the name you desire (up to four characters), press ENTER . Deleting a Landmark Following the instructions under Viewing a Landmark, use the LEFT/RIGHT ar
