Resumen del contenido incluido en la página 1
RoyalTek
Bluetooth GPS
Datalog Receiver
RBT-2300
User Manual
V1.0
SiRF Star III GPS Engine Inside
Published on July, 2007 by RoyalTek Company Ltd.
Design and specification are subject to change without notice.
1
Resumen del contenido incluido en la página 2
Content 1. Product Introduction ................................................................5 1.1 Overview..........................................................................................................5 1.2 Main Features...................................................................................................5 1.3 Product Notification.........................................................................................5 1.4 Application...........................
Resumen del contenido incluido en la página 3
4.2. GPS Demo Screen.........................................................................................26 4.2.1. GPS Port: ...........................................................................................26 4.2.2. Baud Rate:..........................................................................................26 4.2.3. About:.................................................................................................26 4.2.4. Action:..................................
Resumen del contenido incluido en la página 4
7.1 Connect RBT-2300 ................................................................................36 7.2. How to use data download Utility ........................................................36 8.Explanation of GPS Terminology...........................................41 9. Photo match Tool -locr GPS Photo introduction...................42 4
Resumen del contenido incluido en la página 5
1. Product Introduction 1.1 Overview RoyalTek the first SiRF Star III Bluetooth GPS datalog receiver, RBT-2300, is the successor of well-known RBT-2300 Bluetooth GPS datalog receiver in 2007. It uses SIRF Star III low power extreme fast TTFF GPS engine and inherits the previous strength point by using the same battery (Lithium-ion battery) of Nokia 6100 cell phone. With the same dimension of 72(L) x 42(W) x 25mm(H) and weight only 62g, making it an ideal solution to carry everywhere.
Resumen del contenido incluido en la página 6
2. Before Start 2.1 Check the Package Content Before you start using RBT-2300, please check out if your package includes the following items. If any item is damaged or missed, please contact your reseller at once. ● RBT-2300 Bluetooth GPS datalog receiver ● Car Charger (optional) ● CD ● AC Adapter(optional) ● External antenna(optional) ● Backup battery(optional) 2.2 Power Switch, Power Jack & External Antenna Port Power Switch External Antenna Port (Optional) Power
Resumen del contenido incluido en la página 7
2.3 LED Display 1 2 3 4 5 Battery Status Memory Status GPS Status Bluetooth Status 1 Yellow LED indicates power is in charging 2 Blinking Amber LED indicates low power 3 Glowing RED LED indicates Memory Full (GPS Green LED off) 4 Glowing Green LED indicates position is fixed Blinking Green LED indicates position not fixed 5 Glowing Blue LED indicates Bluetooth is connected Blinking Blue LED indicates Bluetooth is not connected 2.4 Hardware Features 2.4.1. P
Resumen del contenido incluido en la página 8
When Memory full, the GPS Green LED is off. 2.4.5. Memory Status LED (Red) Glowing – Memory is full. RED LED blinking when erasing memory data. 2.4.6. Battery Status LED (Amber/Yellow) None - Battery has adequate power supply. Amber - Power is low. Charging immediately is required. Yellow - Connected to power charger, charging. LED off - Battery is fully charged. 2.5. Getting Started 2.5.1. STEP 1: Charge the Battery Before you use RBT-2300, the battery must be cha
Resumen del contenido incluido en la página 9
2.5.4. STEP 4: Connect to your Navigation Software Load your GPS mapping or routing software, along with the corresponding maps of the areas that you are occupying or plan to travel to. Start the application. Make sure the application is set for the COM port that your Bluetooth-enabled mobile device will use for serial communication. Now you should be ready to use your GPS application as directed by the user documentation that came with the software. More configurations m
Resumen del contenido incluido en la página 10
3. Software Installation The Main Menu of Installation CD shows as above. Click the Data download Utility for Windows to install the pc download program. Click the Software for Windows to install the PC software application. Click the Software for Pocket PC to install the PDA software application. Click the Software for Palm OS to install Palm software application. Click the User Manual to open the user manual of Bluetooth GPS. Click the View Royaltek Website to li
Resumen del contenido incluido en la página 11
3.1. Install Data download Utility for Windows Click “Next> to next page”, or click”” to next page, or click”
Resumen del contenido incluido en la página 12
Click “Install” to start installation. Or click”
Resumen del contenido incluido en la página 13
Start installation. Please click “Finish” to finish the Installation. 13
Resumen del contenido incluido en la página 14
Finally you will see the icon on windows desk. 3.2 Install locr GPS Photo Utility *Before you install the Utility, please check the Internet connection is ok. To the License Agreement page: Click “Accept” to start installation, or click ”Don’t Accept” to give up installation. Then 14
Resumen del contenido incluido en la página 15
Start installation. Click “Next> to next page”, or click”
Resumen del contenido incluido en la página 16
Select Installation folder and Click “Next> to next page”, or click” to start installation”, or click”
Resumen del contenido incluido en la página 17
locr GPS Photo is being installed Installation Complete Finally you will see the icon on the windows desk. 17
Resumen del contenido incluido en la página 18
18
Resumen del contenido incluido en la página 19
3.3. Install PDA Software Application Before you click the “Software for Pocket PC ” to install the PDA software application from CD, you have to synchronize the PDA and your system. Then the following window will show in your system as below: Click “Yes>” to continue. Or click ”No” to select the other destination to install, or “Cancel” to give up installation.
Resumen del contenido incluido en la página 20
Click “ OK” to complete the installation. 20
