Resumen del contenido incluido en la página 1
COLOR DGPS/PLOTTER/SOUNDER
COLOR GPS/PLOTTER/SOUNDER
GP-1850WDF, GP-1850WF FURUNO/NAVIONICS
GP-1850WDF, GP-1850WF FURUNO/C-MAP NT
Resumen del contenido incluido en la página 2
Your Local Agent/Dealer Your Local Agent/Dealer 9-52 Ashihara-cho, 9-52 Ashihara-cho, Nishinomi Nishinomiy ya, Ja a, Jap pan an Tele Telep phone : hone : 0798-65-2111 0798-65-2111 Telefax : Telefax : 0798-65-4200 0798-65-4200 FIRST EDITION : FIRST EDITION : A AUG. UG. 2002 2002 A All ri ll rig ghts reserved. hts reserved. Printed in Japan Printed in Japan B : B : A AUG. UG. 28,2002 28,2002 PUB.No. PUB.No. OME-44252 OME-44252 *00080937000* *00080937000* *00080937000* *0008093700
Resumen del contenido incluido en la página 3
SAFETY INSTRUCTIONS W WARNING ARNING CAUTION Do not use the equipment for other than Do not open the equipment. its intended purpose. Hazardous voltage which can cause No one navigation device should ever be electrical shock, burn or serious injury solely replied upon for the navigation of exists inside the equipment. Only qualified personnel should work inside the equipment. a vessel. Do not disassemble or modify the Always confirm position against all available equipment. aids to
Resumen del contenido incluido en la página 4
TABLE OF CONTENTS FOREWORD .................................. iv 3. PLOTTER DISPLAYS 3.1 Presentation Modes......................3-1 SYSTEM CONFIGURATION ......... v 3.2 Cursor...........................................3-2 3.3 Shifting the Display........................ 3-2 WHAT IS WAAS?........................... vi 3.4 Displaying Nav Information Window3-2 3.5 Selecting Chart Scale/Range......... 3-3 1. OPERATIONAL OVERVIEW 3.6 Mini Chart Cards ........................... 3-3 1.1 Dis
Resumen del contenido incluido en la página 5
TABLE OF CONTENTS 7. ROUTES 12. USING C-MAP NT MODEL 7.1 Entering Routes.............................7-1 12.1 Inserting Chart Card .................. 12-1 7.2 Connecting Routes........................7-2 12.2 Cursor and Data Display ........... 12-2 7.3 Inserting, Removing Waypoints.....7-3 12.3 Tidal Information.........................12-3 7.4 Creating Track-based Routes........7-5 12.4 Navigation to Ports, Port 7.5 Erasing Routes..............................7-6 Services ........
Resumen del contenido incluido en la página 6
FOREWORD Navigation information is displayed on a A Word to bright 6.5-inch color TFT LCD. On-screen GP-1850WDF/1850WF Owners information shown are position, range and Congratulations on your choice of the bearing to cursor position, range, bearing, FURUNO GP-1850WDF COLOR ETA and TTG to waypoint, etc. DGPS/PLOTTER/SOUNDER, GP-1850WF A high sensitivity receiver tracks up to twelve COLOR GPS/PLOTTER/SOUNDER. We are (WAAS: thirteen) satellites simultaneously. confident you will see wh
Resumen del contenido incluido en la página 7
SYSTEM CONFIGURATION GPA-017 GPA-019 (GP-1850WF) (GP-1850WDF) ANTENNA UNIT Receives signal from GPS satellite and beacon reference station. (GP-1850WDF only) DISPLAY UNIT External equipment (Autopilot, etc.) DGPS beacon receiver (GP-1850WF only) Matching Box Rectifier MB-1000* PR-62 Ship's mains Ship's mains 100/110/115/220/230 VAC 12-24 VDC 1 , 50/60 Hz Transducer *Required for 1 kW transducer only v
Resumen del contenido incluido en la página 8
WHAT IS WAAS? WAAS, available in North America, is a provider in the worldwide SBAS (Satellite Based Augmentation System) navigation system. An SBAS provider furnishes GPS signal corrections to SBAS users. Two more SBAS providers are also currently under development, MSAS (Multi-Functional Satellite Augmentation System) for Japan and EGNOS (Euro Geostationary Navigation Overlay Service) for Europe. All providers will be compatible with one another, thus providing “seamless” position fixe
Resumen del contenido incluido en la página 9
1. OPERATIONAL OVERVIEW This chapter acquaints you with the basics of your unit - from turning on the power to the soft key menu operation. 1.1 Display Unit Controls • Registers own ship's positions. • Marks man overboard position, event position. Cursor pad Registers items • Shifts cursor and display. on menus. • Selects items on menus. SAVE MOB ENTER ABC DEF GHI 1 2 3 Enter alphanumeric data. JKL MNO PQR Soft key's functions change 5 4 6 depending on the display. STU VWX YZ& 7 8 9 _'# CL
Resumen del contenido incluido en la página 10
1. OPERATIONAL OVERVIEW 1.2 Remote Controller Inscribes waypoints. Inscribes MOB MOB mark. Displays alarm SAVE ALARM menu. SW 1 ABC 1 DEF 2 GHI 3 Enter, cancel, clear SW 2 JKL 4 MNO 5 PQR 6 alphanumeric data. Soft keys SW 3 STU 7 VWX 8 YZ 9 SW 4 _'#0 MENU ENTER SW 5 CLEAR ZOOM IN/OUT Expand, shrink Shows/hides soft chart. SHOW key menu. CANCEL HIDE Adjust brilliance. Functions same BRILL CENTER as cursor pad. Adjust tone. Displays the waypoint & WPT PLOT route menu. TONE SNDR RTE Note: Th
Resumen del contenido incluido en la página 11
1. OPERATIONAL OVERVIEW 1.3 Inserting Mini Chart 1.4 Turning the Power Card On/Off Insert appropriate mini chart card before Turning the power on turning on the power. Press the [POWER/BRILL] key at bottom left-hand side of the display unit to turn on Note: Static electricity can be passed the power. When the unit is turned on, it through your fingers to a memory card proceeds in the sequence shown in the and destroy the contents of the card. figure in below, after displaying the FU
Resumen del contenido incluido en la página 12
1. OPERATIONAL OVERVIEW When the satellite signal is being received 1.5 Adjusting Tone and normally, the GP-1850WDF/1850WF Brilliance displays various abbreviations at the bottom 1. Press the [POWER/BRILL] key with a left-hand corner of the display which show touch-and-release action. The tone and DGPS/GPS receiver status. The table in brilliance setting window appears. below shows these abbreviations and their Functions meanings. Display abbreviations TONE Indication Meaning
Resumen del contenido incluido en la página 13
1. OPERATIONAL OVERVIEW 1.6 Plotter Displays NORTH UP ZOOM Press the [PLOT] key. Each time this key is IN pressed, the display mode changes in the ZOOM OUT sequence shown below. For display mode, COURSE refer to Chapter 3. UP WP-002 FISH BRIDGE NAV DGPS 3D POS [Plotter Display] DATE: JUN 02 2002 TIME 23:59:59 LAT/LON TRIP:123nm POSITION LAT LON 34° 56.789' N 135° 56.789' E TD SPD RNG 16.3 kt 27.2 nm ZOOM CSE BRG SAT 245.8° 245.0° INFO DATUM: WGS-84 BEACON INFO TMP
Resumen del contenido incluido en la página 14
1. OPERATIONAL OVERVIEW 1.7 Sounder Displays Three sounder displays are available: Normal, Dual-frequency display and NORTH 0 UP Plotter/Sounder display. You may select a ZOOM IN sounder display with the [SNDR] key. 50 ZOOM OUT PLO PLO T T 100 SNDR SNDR COURSE 150 DGPS 3D UP [Plotter/Sounder Display] SOUNDER 0 0.0 RANGE 50 GAIN PLO SHIFT T 100 MODE/ SNDR FREQ 150 SNDR DGPS 3D FUNC 50k [Normal Sounder Display] SOUNDER 0 0.0 DUAL 50 RANGE 50 GAIN 200kHz 100 GAIN PLOT 50k
Resumen del contenido incluido en la página 15
1. OPERATIONAL OVERVIEW 3. Select item with the cursor pad, and 1.8 Menu Operation, Soft press the EDIT soft key. For example, Keys select TIME DISPLAY. Most operations are carried out through the TIME DISPLAY menu which is opened and closed with the [MENU] key. Menus may be selected with 12 HOUR the five soft keys to the right of menus. 24 HOUR Options are selected with the cursor pad. Time display window 1. Press the [MENU] key to display the main menu. 4. Use the cursor
Resumen del contenido incluido en la página 16
1. OPERATIONAL OVERVIEW 9. Select DEMO COURSE and press the 1.9 Demonstration Display EDIT soft key. Select how you want the The demonstration display provides courseline to be traced; by FIGURE 8 or simulated operation of this unit. On the DIR.(ection). For DIR., enter course. plotter display, own ship tracks, at the speed 10. Press the ENTER soft key or [ENTER] selected, a figure eight course or any course key. you enter, starting from position entered. All 11. Select DEMO STA
Resumen del contenido incluido en la página 17
2. VIDEO SOUNDER OPERATION The entire process begins in the display unit. 2.1 Principle of Operation Transmitter power is sent to the transducer The video sounder determines the distance as a short pulse of electrical energy. The between its transducer and underwater electrical signal produced by the transmitter objects such as fish, lake bottom or seabed is converted into an ultrasonic signal by the and displays the results on screen. It does transducer and transmitted into the water.
Resumen del contenido incluido en la página 18
2. VIDEO SOUNDER OPERATION 2. Press the MODE/FREQ soft key. The 2.2 Sounder Display display changes as below. Description SOUNDER 0 0.0 The figure below shows all indications and MODE/FREQ SELECT markers which may appear on the normal 50kHz AUTO CRUISING sounder display. 50 SELECT AUTO FISHING 200kHz MANUAL Normal sounder display indications, 100 markers Functions for soft keys RETURN 150 Variable DGPS 3D 50k Range Marker Nav information (white) window
Resumen del contenido incluido en la página 19
2. VIDEO SOUNDER OPERATION Bottom-zoom display Selecting sounder display mode There are five display modes from which to This mode expands bottom and bottom fish choose: normal, marker zoom, bottom zoom, echoes to vertical size of the screen, and is bottom lock and A-scope. To select a display, useful for observing the bottom shape. press the SNDR FUNC soft key on the normal sounder display to show the sounder 0 100 Normal 40.0 function window, and press ▲ or ▼ to select sounder Bott
Resumen del contenido incluido en la página 20
2. VIDEO SOUNDER OPERATION A-scope display 2.4 Plotter/Sounder Display This display shows echoes at each This display provides the plotter display on transmission with amplitudes and tone the left part of the screen and the normal proportional to their intensities, on the right sounder display on the right part. It is useful of the screen. It is useful for estimating the for searching fish schools at cruising speed. kind of fish school and seabed composition. The width of the sou
