Manual de instrucciones de Moog 813

Resumen del contenido incluido en la página 1

Rotary Servo Actuators • Linear Actuators • Amplifiers • Transducers
A complete product line of actuator solutions for
the most demanding applications.
• Military and Commercial Aircraft
• Target Drones
• Unmanned Vehicles
• Military Land and Sea Vehicles
• Military Security Applications

Resumen del contenido incluido en la página 2

Rotary Servo Actuators Moog Components Group has been Model 813 • High efficiency steel gearing designing and producing specialized high The Model 813 • Front mount technology and utility electromechanical Rotary Brushless • Stroke: ±30° 0r ±90° electrical stroke actuators for over 20 years. Total in-house Actuator is an • No-load speed: 137 deg/sec design, engineering and manufacturing antenna azimuth • Bandwidth to 10 Hz expertise for these products. drive servo actuator • Non-jamming me

Resumen del contenido incluido en la página 3

Rotary Servo Actuators Rotary Servo Actuators • Weight: 3 lbs Model 915 • Front flange mount The Model 915 • Peak torque: 300 in-lb • Stroke: ±46º electrical stroke Rotary Servo • SmCo permanent magnet DC motor • No-load speed: 180 deg/sec Actuator is used to • Electronic position and torque limiting • Bandwidth to 8 Hz position the control • Film position transducer • MTBF: 5000 hr surfaces of the QF-4 • Position output signal unmanned air vehicle and is designed Model 940 • ±10 VDC inpu

Resumen del contenido incluido en la página 4

Rotary Servo Actuators • Film position transducer • Size: 2.2 x 2.6 x 6.8 inches Model 873 The Model 873 Rotary Brushless Actuator • Canard E.M. brake • Power: 150 VDC and ±15 VDC is used to control • Low backlash • Power point: 21 in-lb @ 230 rpm the rotational • Robust structural design • Weight: 3.0 lbs function of the • High efficiency steel gearing • Peak torque: 46 in-lbs aircraft’s night • Position output signal • ±10 VDC analog command input vision targeting • Stroke: ±36.5°

Resumen del contenido incluido en la página 5

Rotary Servo Actuators system. The Model 918 Servo Actuator Model 971 • Size: 3.055 x 3.055 x 8.24 (961 only) provides the pitch roll-yaw functioning for Our military qualified Model 971 Rotary, • Power point: 750 in-lb @ 30 rpm Brushless, Stepper this system. • Weight: 13.6 lbs Motor. Limited • Peak torque: 1100 in-lbs • Size: 11.30 x 4.59 x 6.53 inches Rotation Trim • Qualified design • Power: 115 VRMs, 400 Hz Actuator for the • Rugged construction military helicopter. • Weight: 11 lbs •

Resumen del contenido incluido en la página 6

Rotary Servo Actuators / Linear Actuators Rotary Servo Actuators / Linear Actuators 6 Model 995 • Robust structural design • Power: 28 VDC Our 995 Rotary • Worm and worm wheel output (irreversible) • Rated power point: Servo Actuator • High efficiency spur gearing 185 lb @ 1.60 in/sec (Model 801) provides mechanical • Tach signal output 350 lb @ 1.50 in/sec (Model 973) control of the aircraft’s rudder yaw • Torque output limit electronics • Weight: 6.3 lb dampening function • Low backl

Resumen del contenido incluido en la página 7

Linear Actuators / Amplifiers / Transducers Linear Actuators - Amplifiers - Transducers 7 Model 933-01 Transducers The flap position Transducers have been employed on both transducer is used in military and commercial aircraft to provide C-5 military transports position feedback information of flight to convert the control surfaces to the flight computers, mechanical position of autopilots and cockpit displays. • Size: 3.88 x 4.75 x 14.75 inches long the flaps to appropriate electr

Resumen del contenido incluido en la página 8

Actuator Product Overview Product Type Model Number Size (inches) Load Stroke Weight Rotary Actuator Torque (in-lbs) ◦ Rotary 808 1.1 x 2.7 x 4.0 100 in-lbs Peak ±51.5 Plus Others 13 oz Rotary 813 4.33 dia. x 7.76 320 in-lbs Rated Continuous Rotation 12.5 lbs ◦ Rotary 817 1.6 x 4.51 x 5.0 80 in-lbs Rated ±30 Plus Others 2.8 lbs 80 in-lbs Rated ◦ Rotary 819 / 820 1.5 x 3.2 x 4.5 ±45 Plus Others 2.8 lbs 150 in-lbs Peak ◦ Rotary 865-66 2.3 x 4.75 x 5.0 300 in-lbs Stall ±46 3 lbs 150 in-lbs Rate