Manual de instrucciones de Nexgrill 720-0018-LP

Resumen del contenido incluido en la página 1

Resumen del contenido incluido en la página 2

Resumen del contenido incluido en la página 3

IMPORTANCE * * * WARNING * * * FOR YOUR SAFETY If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. Open lid 4. If odor continues, immediately call your gas supplier or your fire department. FOR YOUR SAFETY 1. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. 2. An LP cylinder not connected for use should not be stored in the vicinity of this or any other appliance.

Resumen del contenido incluido en la página 4

IMPORTANCE WARNING * * * *** FOR YOUR SAFETY It you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. Open lid 4. If odor continues, immediately call you gas supplier or your fire department. FOR YOUR SAFETY 1. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. 2. An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance. 1

Resumen del contenido incluido en la página 5

Resumen del contenido incluido en la página 6

PRECAUTIONS When using the grill, do not touch the grill rack, burner grate or immediate surroundings as these Do not use the grill for cooking excessively fatty areas become extremely hot and could cause meats or products which promote flare-ups. Do not burns. Use only dry potholders. Moist or damp operate the grill under unprotected combustible potholders on hot surfaces may cause burns from construction. Use only in well ventilated areas. Do steam. Do not use a towel or bulky cloth in

Resumen del contenido incluido en la página 7

Resumen del contenido incluido en la página 8

ASSEMBLY INSTRUCTIONS SIDE SHEL Remove bottom panels and casters from the carton. Use 16 pieces of truss head 1/4”x12mm screw and 16 pieces of 1/4”split lock, which have been locked into the bottom panel, to secure two casters and two casters with brake to bottom panel . Assemble back panel to bottom panel with 3pieces of truss head 5/32” x10mm screw and 3pieces of 5/32” split lock which have been locked into the back panel. 4

Resumen del contenido incluido en la página 9

Resumen del contenido incluido en la página 10

Resumen del contenido incluido en la página 11

Resumen del contenido incluido en la página 12

ASSEMBLY INSTRUCTIONS Side Burner Valve Assembly Align side burner valve to the side burner front panel hole. Then, screw the side burner valve. Side Burner Valve Assembly Then, turn knob (clock wise) to put the side burner knob on. 8

Resumen del contenido incluido en la página 13

Resumen del contenido incluido en la página 14

Resumen del contenido incluido en la página 15

Resumen del contenido incluido en la página 16

Resumen del contenido incluido en la página 17

BEFORE TESTING local gas supply may make it necessary to adjust Make sure that all packing material is removed from the burners. The flames of the burners should be the grill including the burner tie-down straps. visually checked. DO NOT SMOKE WHILE LEAK TESTING. Flames should be blue and stable with no yellow tips, excessive noise or lifting. If any of these NEVER LEAK TEST WITH AN OPEN FLAME. conditions exist, check to see if the air shutter or burner ports are blocked by dirt, de

Resumen del contenido incluido en la página 18

Resumen del contenido incluido en la página 19

14

Resumen del contenido incluido en la página 20

LIGHTING ILLUSTRATIONS Main & Side Burner Lighting Illustration Rotisserie Burner Lighting Illustration 1.Push and turn the rotisserie knob to HI. 1.Make sure the lid is open. 2.Push and turn one of main or side 2.Press the electric igniter 3 to 4 seconds to burner knob to HI position. light the rotisserie burner. 3.You may need 3 or 4 trials to light the burner 3.After the rotisserie burne