Resumen del contenido incluido en la página 1
Use and Care Guide
LiquidPropane Gas(LPG)Grill
Model 141.16315800
Model 141.16313800
• Safety
• Assembly
• Use and Care
• Cooking Guide
• Frequently Asked Questions
• Failure to comply with these instructions could
Call us first if you have any problem with
result in a fire or explosion that could cause
this product. We can help you with ques-
serious bodily injury, death or propertydamage.
tions about assembly and grill operation or
• Whether this grill was assembled by you or
if there are dama
Resumen del contenido incluido en la página 2
Primary Safety Warnings ........................... 1-3 IF YOU SMELL GAS: Warranty Terms and Conditions .................. 2 Pre-Assembly Instructions .............................. 3 1. Shut off gas to the appliance. Part Diagrams and Lists .......................... 4-8 2 Extinguish any open flame. Assembly Instructions ............................... 9-15 3. Open lid. LP Gas Tank Installation ...................... 16-18 4. If odor continues, keep away from Use & Care Instructions: the applia
Resumen del contenido incluido en la página 3
Failure to comply with these instructions may 1. Do not store spare LP cylinder result in a hazardous situation which, if not within 10 feet (3m) of this appliance. avoided, may result in injury. 2. Do not store or use gasoline or Spiders and small insects can spin webs and other flammable liquids and nest in the grill ring transit and vapors within 25 feet (8m) of this warehousing Ls flow obstruction round the appliance. Burner Tc FIRE" 3. When cooking with oil/grease, do can CAM'. an not allow
Resumen del contenido incluido en la página 4
PART # PART DESCRIPTION QTY PURPOSE OF PART P06001064B Hardware Pack 1 For use in assemblyof Model 141.16313800 P06001065B Hardware Pack 1 For use in assemblyof Model 141.16315800 P05515101L Wrench/No.17 Customized 1 Tightens Casters S112G0432A Phillips Head Screw 1/4"x2" 8 Attaches Cart Legs with Side Panel to Cart Bottom Shelf $233G04572 Wing Bolt 1/4"x6-11/16" 1 Secures Gas Tank Special Nut 1/4" 1 S303G0404D S112G0408A Phillips Head Screw 1/4"xl/2" 4 Attaches Cart Rear Panel to Cart Legs with
Resumen del contenido incluido en la página 5
Phillips Head Screw 1/4"xl/2" Phillips Head Screw 1/4"xl-3/16" Phillips Head Screw 1/4"x3/4" Qty: 4 (Model 141.16313800) Qty. 10 Qty. 4 Qty: 1! (Model 141.163!5800) Part # S112G0412A Part # S112G0419A Part # S112G0408A (Black Painted) (Black Painted) (Black Painted) Phillips Head Screw 3/16"x3/8" Phillips Head Screw Phillips Head Screw 1/4"x2" M4x8mm Qty. 6 Qty. 12 Part # S112G0306A Qty. 4 Part # S112G0432A Part # $112M04084 (Black Painted) (Black Painted) Steel Painted I/!/!///!///////!/!/!/!/!
Resumen del contenido incluido en la página 6
59 30 31 15 A2 A9 All 45
Resumen del contenido incluido en la página 7
16313800 16315800 KEY PART DESCRIPTION PART # QTY PART # QTY 1 Lid P0014618E4 1 P0014722E4 1 2 Lid Trim Plate P0011452QJ 1 P0011453QJ 1 3 Protective Pad, Front P055180261 2 P055t80261 2 4 Protective Pad, Rear P055180011 2 P055t80011 2 5 P00601287C 1 P00601287C 1 Temperature Gauge 6 P00614017E 1 P00614017E 1 Temperature Gauge Seat 7 Name Plate P00410041C 1 P00410041C 1 8 Lid Handle P00205098M 1 P00205099M 1 9 Lid Handle Bracket P03303106A 2 P03303106A 2 10 P06901025A 2 P06901025A 2 Lid Handle Hea
Resumen del contenido incluido en la página 8
16313800 16315800 KEY PART DESCRIPTION PART# QTY PART# QTY 50 P05106004A 4 P05106004A 4 Caster, 3 in., with Brake 51 P03313004D 1 P03313004D 1 Door Hinge Bracket, Left 52 P03313002D 1 P03313002D 1 Door Hinge Bracket, Right 53 P03601038A 1 P03601038A 1 Regulator with Hose 54 Cart Partition Panel, Left P07512001D l 55 Cart Partition Panel Bracket, Left P03303014J l 56 P05313010B 1 P05313010B 1 Lighting Stick Assembly 57 P05344006Q 1 P05344006Q 1 Weight A 58 P05344005Q 1 P05344005Q 1 Weight B 59 2
Resumen del contenido incluido en la página 9
Install Casters [] Place the Cart Side Panels on the cardboard. Install the 4 Casters into the Caster Seats as shown. Wrench/No.17 Customized Qty. 1 Part # P05515101L Scale 1:2 H nstall Cart Side Panels to Cart Bottom Shelf [] Screw the Wing Bolt and Special Nut to Cart Bottom Shelf. [] install the left and right Cart Side Panels (parts are labeled L or R) to Cart Bottom Shelf. (Note: Be sure not to tighten securely until Rear Panel is attached). Special Nut 1/4" Qty. 1 Part # S303G0404D (Black
Resumen del contenido incluido en la página 10
Install Cart Rear Panel [] Install the Cart Rear Panel between rear cart Legs as shown. [] Tighten all screws securely. // / ,/ Phillips Head Screw 1/4"xl/2" // / Qty. 4 ,/ Part # S112G0408A (Black Painted) Install Partition Panel (For Model 141.16315800 only) [] Install the Partition Panel to Left Cart Side Panel and Cart Rear Panel. [] Install the Partition Panel Bracket between Partition Panel and Cart Bottom Shelf. Phillips Head Screw 1/4"x1/2" Qty. 7 Part # S112G0408A (Black Painted) \, "--
Resumen del contenido incluido en la página 11
Install Gas Tank Heat Shield [] Align the 3 holes on Gas Tank Heat Shield with the Cart Rear Panel and Front Cart Bracket. [] Insert the 3 Phillips Head Screws M4x5mm from underside of the Gas Tank Heat Shield and tighten securely. I Phillips Head Screw M4x5mm Qty. 3 Part # S112M0405A (Black Painted) _'_ Install Doors [] install the Door Handle to Right Door using Phillips Head Screw M4x8mm [] install the Door Guide Plate to Cart Bottom Shelf using Phillips Head Screw 3/16"x3/8" [] Insert Door b
Resumen del contenido incluido en la página 12
Install Grill Bowl [] Remove cooking components from Grill Head. With an assistant, lift and position Grill Head on the Cart. [] Tighten securely using Phillips Head Screw 1/4"xl-3/16". Phillips Head Screw 1/4"xl-3/16" Qty. 4 Part # S112G0419A (Black Painted) Install Side Shelf and Side Burner Frame [] Align the 2 holes on Front and Rear Bowl Panels and 3 holes on Left Bowl Panel with the threaded holes on Left Side Shelf. Insert the 3 Phillips Head Screws 1/4"x3/4" from the inside of the grill
Resumen del contenido incluido en la página 13
Install Lid Wind Shield [] Align the 2 holes on Rear Lid Wind Shield with the upper threaded holes on Rear Lid Wind Shield Bracket. Insert the 2 Phillips Head Screws 3/16"x5/16" and tighten securely. Phillips Head Screw 3/16"x5/16" Qty. 2 Part # S275G0305A Install Side Burner Gas Valve and Side Burner Electrode Wire [] Cut fastening strap that secures pot support to burner. [] Insert the Side burner Gas Valve Assembly into Side Burner Tube (See Figure 1). Be sure the orifice is inside the Burner
Resumen del contenido incluido en la página 14
Install Grease Draining Tray [] Loosen screws and raise Rear Upper Bowl Panel. [] Slide the Tray side tabs over the side rails underneath the Grill Bowl. (See Figure 3). [] Slide the Rear Upper Bowl Panel down and tighten screws securely. (see Figure 4). [] Install Grease Receptacle under the Grease Draining Tray from the front of grill. (See figure 5). Figure 3 Figure 5 Rear Upper Bowl Panel raised lowered Figure 4 14
Resumen del contenido incluido en la página 15
Install Ignitor Battery [] Unscrew Ignitor Cap from Control Panel. [] Place supplied AA battery into the Ignitor Slot with positive pole facing you. [] Position the Cap and Spring over the AA battery and tighten onto Control Panel. Main Burners Electrode Check Perform this Electrode Check with the assistance of another person. ,gnito - This test will ensure that the Spark Electrode Tips Cap Spring are properly positioned so your grill lights easily AA Battery and properly. Ignitor Slot Spark Ga
Resumen del contenido incluido en la página 16
[] Use of alcohol, prescription or non-prescription CORRECT LP GAS TANK USE drugs can impair your ability to properly assemble and safely operate your grill. [] LP Gas grill models are designed for use with a standard 20 lb. Liquid Propane Gas (LP Gas) tank, [] Keep fire extinguisher readily accessible. In the not included with grill. Never connect your gas grill to event of a oil/grease fire, do not attempt to an LP Gas tank that exceeds this capacity. A tank of extinguish with water. Use type
Resumen del contenido incluido en la página 17
To Install LP Gas Tank: NOTE about LP Gas Tank Exchange Programs Secure a 201b LP Gas Tank to Gas Grill • Many retailers that sell grills offer you the option of replacing your empty LP Gas tank through an ex- [] Screw the Wing Bolt and Special Nut to Cart change service. Use only those reputable exchange Bottom Shelf. companies that inspect, precision fill, test and certify [] Turn your LP Gas Tank Valve clockwise to the their tanks. Exchange your tank only for an OPD safety closed or OFF posit
Resumen del contenido incluido en la página 18
Check all connections for LP Gas Leaks LP Gas Model only: Connect Regulator with Hose to your LP Gas Tank Never test for leaks with a flame. Prior to first use, [] Turn all Burner Valves to the OFF position. at the beginning of each season, or every time [] Inspect the valve connection port and regulator your LP Gas tank is changed, you must check for assembly for damage or debris. Remove any gas leaks. Follow these three steps: debris. Never use damaged or plugged equip- [] Make a soap solution
Resumen del contenido incluido en la página 19
Rotisserie Burner Lighting Instructions Grill Lighting Instructions 1. Follow steps 1 through 4 of the Grill Lighting 1. Before each use, check all hoses for cracks, nicks, cuts, Instructions. burns or abrasions. If a hose is damaged in any way, do 2. Push and turn the Control Knob to ON. Immediately not use your grill before replacing the hose with an press the Electric ignitor for 10 seconds to light the authorized part from the Parts List. Also make sure all Burner. gas supply connections are
Resumen del contenido incluido en la página 20
Troubleshooting To purge air from your gas line and/or reset the regulator excess gas flow device: If the grill fails to light : [] Turn Control Knobs to the OFF position. 1. Turn gas off at source and turn Control Knobs to OFF. Wait at least 5 minutes for gas to clear, then [] Turn off the gas at the tank valve. retry. [] Disconnect regulator from LP Gas tank. 2. If your grill still fails to light, check gas supply and connections. [] Let unit stand 5 minutes to allow air to purge. 3. Repeat li
