Resumen del contenido incluido en la página 1
65852 G
Instruction Booklet Gas Hob
GB
IE
Resumen del contenido incluido en la página 2
2 Welcome to the world of Electrolux Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable. You find some examples on the cover in this manual. Please take a few minutes to study this manual so that you can take advantage of the benefits of your new machine. We promise that it will provide a superior User Experie
Resumen del contenido incluido en la página 3
3 Contents Important Safety Information ..................................................................................... 2 Instructions for the User ............................................................................................... 5 Description of the Hob............................................................................................................ 5 Operation .........................................................................................................
Resumen del contenido incluido en la página 4
4 Important Safety Information You MUST read these warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department on 08705 350350 Installation # This appliance must be installed and serviced by a competent person as stated in the Gas Safety (Installation and Use) Regulations Current Editions and the IEE Wiring Regulations. # For appliances installed in the Republic of Ireland please refer to NSAI-Domestic Gas Installations I.S.813 Current Edit
Resumen del contenido incluido en la página 5
5 # When using the hob for a long period time, the ventilation should be improved, by opening a window or increasing the extractor speed. # Do not use this hob if it is in contact with water. Do not operate the hob with wet hands. # Ensure the control knobs are in the OFF position when not in use. # When using other electrical appliances, ensure the cable does not come into contact with the hot surfaces of the cooking appliance. # Unstable or misshapen pans should not be used on the hob as uns
Resumen del contenido incluido en la página 6
6 Description of the Hobs 2 2 3 1 4 5 6 7 8 1. Hob Top 2. Semi-rapid Burner 3. Triple Crown Burner 4. Auxiliary Burner 5. Control knob for front left burner (semi-rapid) 6. Control knob for back left burner (semi-rapid) 7. Control knob for back right burner (triple crown) 8. Control knob for front right burner (auxiliary) INSTALLATION Any gas installation must be carried out by a registered competent person, and in accordance with existing rules and regulations. The relevant instructions are to
Resumen del contenido incluido en la página 7
7 Operation Hob burners control knobs The symbols on the knobs mean that : # there is no gas supply there is maximum gas supply there is minimum gas supply Lighting the burners For easier lighting, proceed before putting a pan on the pan support. To light a burner: ! # turn the relevant knob anticlockwise to maximum position ( ). # Upon ignition, keep the knob pushed down about 5 seconds. This will allow the "thermocouple" (Fig. 1 - letter D) to be heated and the safety device to be switche
Resumen del contenido incluido en la página 8
8 Using the hob correctly To ensure maximum burner efficiency, it is strongly recommended that you use only pots and pans with a flat bottom fitting the size of the burner used, so that flame will not spread beyond the bottom of the vessel (see the table beside). Burner minimum maximum diameter diameter Triple crown (ultra-rapid) 180 mm 260 mm Medium (semi-rapid) rear 120 mm 220 mm front 120 mm 180 mm Small (auxiliary) 80 mm 160 mm As soon as a liquid starts boiling, turn down the flame so that
Resumen del contenido incluido en la página 9
9 Using the Wok Stand A wok stand is provided to enable you to use a round bottomed wok on the hob. The wok stand must only be used on the triple crown burner, and should not be used with any other type of wok or pan. When fitting the wok stand, ensure the recesses in the fra- me fit securely onto the bars of the pan supports, as shown in the picture. quale bruciatore suggerisre per la gri- glia WOK qui?
Resumen del contenido incluido en la página 10
10 Maintenance and Cleaning Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply. The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. This appliance cannot be cleaned with steam or with a steam cleaning machine. The Hob Top Regularly wipe over the hob top using a soft cloth well wrung out in warm water to which a little wasing up liquid has been added. Avoid the use of the fo
Resumen del contenido incluido en la página 11
11 The Burners The burner caps and crowns can be removed for cleaning. Wash the burners caps and crowns using hot soapy water, and remove marks with a mild paste cleaner. A well moistened soap impregnated steel wool pad can be used with caution, if the marks are particularly difficult to remove. After cleaning, be sure to wipe dry with a soft cloth. The Ignition electrode The electric ignition is obtained through a ceramic electrode and a metal electrode (Fig. 1 - C). Keep these components very
Resumen del contenido incluido en la página 12
12 Something Not Working? If the hob is not working correctly, please carry out the following checks before contacting your local Service Force Centre. SYMPTOM SOLUTION % There is no spark when lighting & Check that the unit is plugged in the gas. and the electrical supply is switched on. & Check that the RCCB has not tripped (if fitted). & Check the mains fuse has not blown. & Check the burner cap and crown have been replaced correctly, e.g. after cleaning. % The gas ring burns unevenly. &
Resumen del contenido incluido en la página 13
13 Instructions for the Installer Engineer technical data OVERALL DIMENSIONS Width: 594 mm Depth: 510 mm CUT OUT DIMENSIONS Width: 560 mm Depth: 480 mm SUPPLY CONNECTIONS Gas: R 1/2 inch (1/2 inch male) Rear right hand corner Electric: 230 V~ 50 Hz supply, 3 core flexible cable with non rewireable plug fitted with a 3 amp cartridge fuse. HEAT INPUT Rear Left Burner 2.0 kW (6826 BTU/HR) (semi rapid) Front Left Burner 2.0 kW (6826 BTU/HR) (semi rapid) Rear Right Burner 4.0 kW (13652 BTU/HR) (trip
Resumen del contenido incluido en la página 14
14 BURNER SEMI-RAPID AUXILIARY TRIPLECROWN TYPE OF GAS POSITION MAX MIN MAX MIN MAX MIN NOMINAL THERMAL POWER kW 2.0 0.45 1.0 0.33 4.0 1.2 NATURAL GAS NOMINAL FLOW 20 mbar 3 RATE m /h 0.190 0.038 0.095 0.028 0.381 0.114 VALUE = 3 37.78 MJ/m NOZZLE REFERENCE 9 6 Adjust. 7 0 Adjust. 14 6 Adjust. 3 Ws - 50.7 MJ/ m 1/100 mm NOMINAL THERMAL LPG GAS POWER kW 2.0 0.45 1.0 0.33 4.0 1.2 28-30/37 mbar NOMINAL FLOW VALUE = RATE
Resumen del contenido incluido en la página 15
15 Important safety requirements This hob must be installed in accordance with the Gas Safety (Installation and Use) Regulations (Current Edition) and the IEE Wiring Regulations (Current Edition). For appliances installed in the Republic of Ireland please refer to NSAI- Domestic Gas Installation I.S. 813 Current Editions and the ETCI Rules for Electrical Installations. Provision for Ventilation Detailed recommendations are contained in the following British Standards Codes Of Practice: B.S. 6172
Resumen del contenido incluido en la página 16
50 mm 100 mm 50 mm 16 CLEARANCES REQUIRED CLEARANCES REQUIRED WHEN FITTING THE GAS HOB WHEN FITTING THE GAS HOB WITH A COOKER HOOD ABOVE WITHOUT A COOKER HOOD ABOVE 700 mm 700 mm 400 mm 400 mm FO 0812 FO 0813 Installation IMPORTANT This hob must be installed by a competent person to the relevant Gas Standards. Any gas installation must be carried out by a registered competent person. Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a break
Resumen del contenido incluido en la página 17
17 FO 0814 FO 0264 A) End of shaft with nut B) Washer C) Elbow On the end of the shaft, which includes the G 1/2" threaded elbow, adjustment is fixed so that the washer is fitted between the components as shown in the diagram. Screw the parts together without using excessive force. Gas Connection Connection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or copper. The connection should be suitable for connecting to R 1/2 (1/2 BSP male thread). When the final connect
Resumen del contenido incluido en la página 18
18 Cut Out Size The dimensions of the cut-out are given in the diagram. Building In Building over a cupboard or drawer If the hob is to be installed above a cupboard or drawer it will be necessary to fit a heat resistant board below the base of the hob on the underside of the work surface. It is also recommended to carry out the electrical connection to the hob as shown in diagrams 1 and 2.
Resumen del contenido incluido en la página 19
19 ON/OFF SWITCH ON/OFF SWITCH 1 2 FLEX OUTLET FLEX OUTLET Building over a kitchen unit with door Proper arrangements must be taken in designing the furniture unit, in order to avoid any contact with the 3 bottom of the hob which can be heated when it is operated. The recommended solution is shown in diagram 3. The panel fitted under the hob ("a") should be easily removable to allow easy access if technical assistance is needed. The space behind the kitchen unit ("b") can be used for connection
Resumen del contenido incluido en la página 20
20 Fitting the Hob into the Worktop Carry out the building in of the hob as follows: 1. place the seals supplied with the hob on the front edge of the cut out. Then, place them at 11 mm from the side edges and at 10 mm from the rear edge, as shown in the diagram, taking care that the seals meet without overlapping. 2. Place the hob in the cut out, taking care that it is centred. 3. Fix the hob with the relevant fixing clamps, supplied with the injectors kit (see diagram). When the screws have be
