Resumen del contenido incluido en la página 1
THE PROFESSIONAL
LIBERTY COLLECTION
Use and Care and Installation Guide
MODELS:
BFG-30G
BFG-30BGD
BFG-30BS
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
A MESSAGE TO OUR CUSTOMERS Thank you for selecting this DCS Professional “Liberty Collection” Outdoor Appliance. Because of this appliance’s unique features we have developed this Use & Care and Installation Guide. It contains valuable information on how to properly install, operate and maintain your new appliance for years of safe and enjoyable use. To help serve you better, please fill out and submit your Product Registration by visiting our website at www. dcsappliances.com and selecting “
Resumen del contenido incluido en la página 4
CONTENTS SAFETY PRACTICES & PRECAUTIONS 3-5 OUTDOOR APPLIANCE MODELS 6 BEFORE USING YOUR APPLIANCE 7 INSTALLATION Locating Outdoor Appliance/Built-in Clearances 8-9 Built-in Construction Details 10 Cart Assembly Instructions 11-15 Gas Hook-up 16-19 Leak Testing 20-21 Burner Adjustment 22 Radiant Assembly 23 Sink 24 Side Shelf (optional) 25-26 Installer Checklist 26 USING THE GRILL Lighting Instructions 27 Use of the Grill 27-28 USING TH
Resumen del contenido incluido en la página 5
SAFETY PRACTICES & PRECAUTIONS IMPORTANT SAFETY NOTICE! Certain Liquid Propane dealers may fill liquid propane cylinders for use in the outdoor appliance beyond cylinder filling capacity. This “Overfilling” may create a dangerous condition. IMPORTANT SAFETY NOTICE! Be sure to remove covers from grill, griddle or side burners before attempting to light or use. “Overfilled” tanks can build up excess pressure. As a safety device, the tanks pressure relief valve will vent propane gas vapor t
Resumen del contenido incluido en la página 6
SAFETY PRACTICES & PRECAUTIONS ■ Never let clothing, pot holders or other flammable materials come in contact with or too close to any grate, burner or hot surface until it has cooled. Fabric may ignite and result in personal injury. ■ Never attach or disconnect an LP cylinder, or move or alter gas fittings when the grill is in operation or is hot. ■ Clean and perform general maintenance on the grill twice a year. Watch for corrosion, cracks, or insect activity. Check the regulator, hoses, bu
Resumen del contenido incluido en la página 7
SAFETY PRACTICES & PRECAUTIONS ■ Do not use aluminum foil to line drip pans, grates or radiants. This can severely upset combustion air flow or trap ex- cessive heat in the control area. The result of this can be melted knobs or damaged ignition components. ■ When using the side burners always use flat bottomed pans which are large enough to cover the side burner. Adjust the flame so that it heats only the bottom of the pan to avoid ignition of clothing. Position handles inward away from op
Resumen del contenido incluido en la página 8
OUTDOOR APPLIANCE MODELS BFG-30G - All-Grill BFG-30BGD - Double Side Burner/Griddle BFG-30BS - Double Side Burner/Sink 6
Resumen del contenido incluido en la página 9
BEFORE USING YOUR APPLIANCE 1. Remove all packaging materials and labels from your appliance. If the installer has not set up your appliance, check that you have the following items: ■ BFG-30G - All-Grill - All-Grill cover - Grill grates (5 pcs) - Radiant trays to hold ceramic rods (2 pcs) - Ceramic rods (28 pcs) - Cover hanger (2 pcs) ■ BFG-30BGD - Side Burner/Griddle - Covers (2 pcs) - Griddle grease cup - Side burner grate - Griddle flu cover - Cover hanger (2 pcs) ■ BFG-30B
Resumen del contenido incluido en la página 10
INSTALLATION LOCATING OUTDOOR APPLIANCE/BUILT-IN CLEARANCES LOCATION: When determining a suitable location, take into account concerns such as exposure to wind (If located in a windy area, a wind break must be provided to prevent poor burner performance or product damage.), proximity to traf- fic paths and keeping any gas or electrical supply lines as short as possible. Locate the outdoor appliance only in a well ventilated area. Do not install the outdoor appliance under overhead unprotect
Resumen del contenido incluido en la página 11
INSTALLATION LOCATING BUILT-IN CLEARANCES WARNING! The appliances are designed to function in an open area. Recommended minimum clearances should be maintained to all surfaces (combustible* and noncombustible**) for optimum performance. Noncombustible** material within the minimum clearance area could result in discoloration or deterioration. *DEFINITION OF COMBUSTIBLE MATERIAL - Any materials of a building structure or decorative structure made of wood, compressed paper, plant fibers, stucc
Resumen del contenido incluido en la página 12
INSTALLATION BUILT–IN CONSTRUCTION DETAILS grill exhaust 12" (to combustible construction) Bottom of support flange 10-1/16" 2" 3/4" 22-3/4" 25-1/2" Standard layout for non-combustible enclosure: WARNING! 28-1/2" If installing the grill 3" into a non-combustible enclosure, all combustible 22-3/4" construction must still be outside the 12 inch clear- ance zone. If your island 18-1/2" is made of stucco over the top of wooden studs, the 4" x 4" opening for gas supply line wood
Resumen del contenido incluido en la página 13
INSTALLATION CART ASSEMBLY INSTRUCTIONS IMPORTANT: Read all instructions before you begin. Do not jump ahead or skip any step. CAUTION: Some parts have sharp edges; care must be taken when handling the various components to avoid injury. Please read safety information provided in these instructions before beginning assembly. Wear gloves when handling. Two or more people should work together to assemble the cart and All-Grill, Double Side Burner/ Sink, or Double Side Burner/Griddle. NOTE: Av
Resumen del contenido incluido en la página 14
INSTALLATION CART ASSEMBLY INSTRUCTIONS Step 1 Link Carts Together (optional) (To link two or more CAD carts, the following instructions must be done first, using the hardware provided, before installing the top modules.) 1. To link your carts together - hand tighten 2 bolts, 4 washers, and 2 nuts on the front and back sides of the carts as shown in Fig. 04. Carefully wrench tighten fasteners once carts are aligned with each other. CAUTION: Once the carts are linked, they cannot be moved. Mo
Resumen del contenido incluido en la página 15
INSTALLATION CART ASSEMBLY INSTRUCTIONS Step 2 Outdoor Appliance Head Preparation 1. First you will need to remove the angle brackets from the side of the unit and replace them with cart mount brackets (Fig. 06). Unit is shipped prepared for island installation. SCREWS 2. Install the bracket tab on both sides of the appliance head using 8 of the 10-24 x 1/2” screws. Install each bracket with 4 screws on each side of the outdoor appliance head Fig. 06 (Fig. 07 and 08). SCREWS Fig. 08 Fig. 07
Resumen del contenido incluido en la página 16
INSTALLATION CART ASSEMBLY INSTRUCTIONS 3. Position tabs on side bracket to fit into slots on the cart (be aware of pinch points)(Fig. 12-13). When complete, the leading ledge should sit flush on the top of the cart (no gap)(Fig. 14). PINCH POINT Fig. 14 Fig. 13 Fig. 12 4. Secure the head to rear of cart (Fig. 15) with (2) Phillips-head screws provided (10-24 x 1/2”). 5. Install remaining (3) screws (10-24 x 1/2”) into the front of head to the cart (Fig. 16). 6. Slide drip tray/pan back into p
Resumen del contenido incluido en la página 17
INSTALLATION CART ASSEMBLY INSTRUCTIONS Step 4 Gas Hookup - LP Make sure the cart assembly is stable. Open the tank drawer. Place the LP tank into location as shown in Fig. 17. Connect the regulator assembly to the tank connection with all appliances valves in the “OFF” position. Open the tank valve and test for gas leaks (Fig. 18). Fig. 17 Fig. 18 FOR YOUR SAFETY To prevent personal injury or damage to the drawers, do not overload them. The maximum rating of each drawer is 35 pounds. WARNI
Resumen del contenido incluido en la página 18
INSTALLATION GAS HOOK-UP GAS REQUIREMENT Verify the type of gas supply to be used, either natural or LP, and make sure the marking on the appliance rating plate agrees with that of the supply. The rating plate is located on the bottom of the outdoor appliance. Never connect an unregulated gas line to the appliance. You must use the gas regulator provided with the unit even if the supply is controlled. An installer-supplied gas shut-off valve must be installed in an easily accessible locati
Resumen del contenido incluido en la página 19
INSTALLATION GAS HOOK-UP LP GAS HOOK UP (TYPE 1 OR QCC1 REGULATOR): All outdoor appliances orificed for use with LP gas come equipped with a high capacity hose/regulator assem bly for connection to a standard 20 lb. LP cylinder (Type 1). The LP tank is not included. Connection: 1/2” NPT male with a 3/8” Flare adapter (included). LP Hose with a quick disconnect and fittings are included. Operating pressure: 11.0” W.C. CAUTION! Before connecting LP tank to regulator, check that all burner
Resumen del contenido incluido en la página 20
INSTALLATION GAS HOOK-UP LP TANK RESTRAINT FOR BUILT-IN INSTALLATION If the grill is to be installed in a Built-in application, then the grill must be installed in accordance with the Built–in installation guidelines. If you intend to operate your Built-in grill on LP gas utilizing a 20 lb Type 1 cylinder, then the Built-in LP tank restraint must be installed prior to initial use of the grill. If you do not have one please contact DCS Customer Care at (888) 936-7872 for information on obtain
