Resumen del contenido incluido en la página 1
GSM-12
MENU/NO ON/YES
Wayne-Dalton Corp
P.O. Box 67 Mt. Hope, OH 44660
www.wayne-dalton.com
Gate System Master Controller
for use with Wayne-Dalton Remote Radio Receivers.
Models: GSM-12
Operating Instructions
and Owner’s Manual
© Copyright 2005 Wayne-Dalton Corp. Part No. 323375 New 06/09/05
Resumen del contenido incluido en la página 2
9v MENU/NO ON/YES GSM-12 ME /NO O /YES NU N Table of contents Package Content 2 Safety Information 3 General Information 4-5 Operation 6-12 Maintenance 13 Service/Trouble Shooting 13 FCC and IC Statement 14 Warranty 15 Package Contents Gate System Master Controller for use with Wayne-Dalton Remote Radio Receivers. Models: GSM-12 Operating Inst
Resumen del contenido incluido en la página 3
Definition of Symbol Warning Safe Operation Precautions WARNING: To prevent electrical shock and/or fire hazards, do not connect the GSM-12 to any device other than a Wayne-Dalton remote radio receiver. WARNING: To reduce the risk of severe or fatal injury: 1. READ and follow all instructions. 2. Observe all warnings, notices and notes in these instructions. SAVE THESE INSTRUCTIONS You can reach us Toll Free 1-800-676-7734 for Consumer Assistance 3 or online at www.waynedalton.com
Resumen del contenido incluido en la página 4
MENU/NO ON/YES Accessing Battery Protective Cover Compartment To gain access to the Battery Compartment, simple remove the Protective Cover/ Stand off the rear of the GSM-12 unit to expose the Battery Compartment. GSM-12 Shipped Position Battery Installation To gain access to the Battery, slide the cover off the back of the GSM-12. To 9v Battery preserve battery life, the 9v Battery GSM-12 of the GSM-12 is shipped with the Battery reversed. Flip the Battery 180° Battery Cover from its
Resumen del contenido incluido en la página 5
Genreal Information MENU/NO ON/YES Data Cable Connection Data Cable Insert the Data Cable into the Communications Port on top of the GSM-12. Place the other end of the Communication Port Data Cable in the Communications Port of the Wayne-Dalton remote radio receiver (sold separately). Protective Cover/Stand The protective cover of the GSM-12 has a built in Stand, which provides hands-free operation. To use the built-in stand, pull the Stand out from the rear of the GSM-12. Stand You
Resumen del contenido incluido en la página 6
Operation Activating the GSM-12 GSM-12 VX.XX 1. Press and release the ON/YES button. PRESS MENU a) The Display will indicate the Model and Version numbers. GSM-12 VX.XX PRESS MENU NOTE: X is the version number GSM-12 MENU/NO ON/YES Programing (Learning) Devices to the GSM-12 LEARN DEVICE? NO YES 1. Press the MENU/NO button until the display indicates the Learn Device WAIT..... operation. LISTENING..... LEARN DEVICE? NO YES 2. Press the ON/YES button. If the receiv
Resumen del contenido incluido en la página 7
Operation Programing (Learning) Devices to the GSM-12 (Continued) 3. Press and hold the transmitter button you would like to program (learn) to the GSM-12. NEW LEARN ID-XXX 4. Once the GSM-12 has received the transmission, two possible messages will be DUPLICATE ID-XXX displayed. LEARN TIME-OUT a) Message 1 will be displayed if this is a new device. LEARN CANCELLED NEW LEARN ID-XXX b) Message 2 will be displayed if this device had been previously added. DUPLICATE ID-XXX 5. If a transmissio
Resumen del contenido incluido en la página 8
Erasing Individual Devices From The GSM-12 Erasing Individual Devices From The GSM-12: ERASE DEVICE? NO YES 1. Press the MENU/NO button until the display indicates the Erase Device operation. ID-XXX YYYYYYY NO ERASE? YES ERASE DEVICE? NO YES ID-XXX ERASE NO UNDO? YES a) Pressing the ON/YES button will display information about an added device. ID-XXX YYYYYYY NO ERASE? YES NOTE: X is the memory location of the device. NOTE: Y is the serial n
Resumen del contenido incluido en la página 9
Operation Erasing All Devices From The GSM-12 ERASE ALL? 1. Press the MENU/NO button until the NO YES display indicates the Erase All operation. ERASE ALL? ERASE ALL? NO SURE? YES NO YES 2. Pressing the ON/YES button will display confirmation message before erasing all devices. ERASE ALL? NO SURE? YES GSM-12 a) To permanently erase all devices, press the ON/YES button. ON/YES MENU/NO b) To cancel the erase all operation, press the MENU/NO button. Retrieving Free Sto
Resumen del contenido incluido en la página 10
Transfering Controller Devices to Radio Remote SEND TO RECEIVER Receiver NO YES 1. Connect the communication cable from the SENDING...... GSM-12 to the Remote Radio Receiver. SENDING DONE 2. Press the MENU/NO button until the display indicates the Send To Receiver CHECKING COMM.... operation. COMM ERROR SEND TO RECEIVER NO YES 3. Pressing the ON/YES button will display transfer operation activity. SENDING...... a) When transfer operation is complete, the
Resumen del contenido incluido en la página 11
Operation Transfering Radio Remote Receiver Devices to GET FRM RECEIVER Controller NO YES 1. Connect the Data Cable from the GSM-12 RECEIVING...... to the Remote Radio Receiver. RECEIVING DONE 2. Press the MENU/NO button until the display indicates the Get From Receiver CHECKING COMM.... operation. COMM ERROR GET FRM RECEIVER NO YES 3. Pressing the ON/YES button will display transfer operation activity. RECEIVING...... a) When transfer
Resumen del contenido incluido en la página 12
Turning Off GSM-12 1. Press the MENU/NO button until the TURN UNIT OFF? display indicates the Turn Off operation. NO YES TURN UNIT OFF? NO YES a) Pressing the ON/YES button will turn off the GSM-12. b) The controller is equipped with an auto shut-off mechanism. After 5 minutes of inactivity, the GSM-12 will automatically turn off. GSM-12 ON/YES MENU/NO You can reach us Toll Free 1-800-676-7734 for Consumer Assistance 12 or online at www.wayned
Resumen del contenido incluido en la página 13
Maintenance While the GSM-12 is maintenance-free, periodic cleaning of the receiver case is suggested. To clean the GSM-12, use a soft cloth to remove any dirt and dust. Service Unit contains no user serviceable parts. Contact your dealer or Wayne-Dalton customer support for additional information. Battery Replacement Slide off battery cover. Replace battery, being careful to match positive (+) symbols on Circuit Boards with battery. Slide battery cover back into place. NOTE: Dispose of d
Resumen del contenido incluido en la página 14
FCC and IC Statement FCC Regulatory Information: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC Regulatory Information: Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interferen
Resumen del contenido incluido en la página 15
GSM-12 LIMITED WARRANTY THE MANUFACTURER (WAYNE-DALTON CORP.) WARRANTS ALL COMPONENTS OF THE GSM-12 FOR A PERIOD OF 90 DAYS FROM THE TIME OF INSTALLATION AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP, PROVIDED IT IS PROPERLY INSTALLED, USED, MAINTAINED AND SERVICED UNDER NORMAL USE AND SERVICE. THIS LIMITED WARRANTY EXTENDS ONLY TO THE ORIGINAL PURCHASER. THIS LIMITED WARRANTY IS NOT TRANSFERABLE. NO EMPLOYEE, DISTRIBUTOR, OR REPRESENTATIVE IS AUTHORIZED TO CHANGE THE FOREGOING WARRANTIES IN
