Resumen del contenido incluido en la página 1
VIZIO
user manual
Model: E221-A1
Resumen del contenido incluido en la página 2
This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. SRS StudioSound HD and SRS TruVolume Manufactured under license from Dolby HDMI, the HDMI logo and High-Definition are trademarks of SRS Labs, Inc. Laboratories. Dolby and the do
Resumen del contenido incluido en la página 3
Welcome Thank You for Choosing ViZio iMPorT anT safeTY insTruCTions And congratulations on your new VIZIO HDTV. Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent To get the most out of your new VIZIO product, read these your TV from being damaged, the following instructions should instructions before using your product and retain them for future be observed for the installation, use, and maintenance of you
Resumen del contenido incluido en la página 4
source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer • Use only with the cart, stand, tripod, bracket, or local power company. or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use • Do not apply pressure or throw objects at your TV. caution when moving the cart/apparatus This may compromise the integrity of the display. The combination to avoid injury from tip-over. manufacturer’s w
Resumen del contenido incluido en la página 5
be used for long period of time. This will protect your TV polarities may cause the batteries to leak which can from damage due to power surges. damage the remote control or injure the operator. Do not expose batteries to excessive heat such as sunshine, fire • Do not attempt to repair or service your TV yourself. or the like. Opening or removing the back cover may expose you to high voltages, electric shock, and other hazards. If repair • If any of the following occurs, contact the deal
Resumen del contenido incluido en la página 6
lightning Protection TeleVision anTenna ConneCTion For added protection of the TV during a lightning storm or when Pro TeCTion it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable If an outside antenna/satellite dish or cable system is to be system. connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against Power lines voltage surges and static cha
Resumen del contenido incluido en la página 7
Table of Contents Adjusting the Advanced Picture Settings ........................22 Installing the TV ................................................ 3 Adjusting the Color Temperature ....................................23 Inspecting the Package Contents .....................................3 Adjusting the Picture Size and Position ...........................23 Installing the TV ...................................................................3 Resetting the Picture Settings ...............
Resumen del contenido incluido en la página 8
Restoring the TV to Factory Default Settings ....................37 Performing a Service Check ............................................37 Using the Info Window ........................................................38 Using the USB Media Player ............................. 39 Using the USB Media Player ................................................39 Connecting a USB Thumb Drive to the TV ........................39 Playing USB Media .....................................................
Resumen del contenido incluido en la página 9
MENU BACK 1 4 7 WIDE VOL VOL Installing the TV 1 InspecTIng The p ackage conTenTs InsT allIng The TV Before installing your new TV, take a moment to inspect the After removing the TV from the box and inspecting the package package contents. Use the images below to ensure nothing is contents you can begin installing the TV. Your TV can be installed missing or damaged. in two ways: • On a flat surface, using the included stand • On a wall, using a VESA-standard wall mount (not included) Install
Resumen del contenido incluido en la página 10
1 To install the base: 1. Place the TV screen-down on a clean, flat surface. To prevent 2. Insert and tighten the two(2) included Phillips screws into scratches or damage to the screen, place the TV on a soft the base with a Phillips screwdriver. (Not included) surface, such as a blanket. Gently push the base into the slots as shown. 4
Resumen del contenido incluido en la página 11
1 Installing the TV on a Wall To mount your TV on a wall, you will need a wall mount. Consult the information below to find the appropriate mount for your TV model: Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you. e221-a1 Screw Size: T4 Screw Pitch: 0.70mm Screw Length: 10mm Hole Pattern: 100mm (V) x 100mm (H) Be sure the mount you choose is capable of supporting the weight of the TV. After you have determined that you have the corr
Resumen del contenido incluido en la página 12
Controls and Connections 2 HDMI - Connect HDMI device. PC Audio In - Connect 3.5mm audio cable from PC. RGB - Connect VGA cable from PC. Coaxial - Connect coaxial cable from cable, satellite, or antenna. Stereo Audio Out - Connect 3.5mm audio device, such as sound bar. USB - Connect USB thumb drive to view photo. Component/Composite - Connect component or composite device. ReAR PAnel Note: The image shown above is for illustrative purposes only and may be subject to change. 6 The actual n
Resumen del contenido incluido en la página 13
2 POWeR/InPUT - Hold to turn TV off or on. Tap to change input source. SIDe PAnel 7
Resumen del contenido incluido en la página 14
2 Front Panel ReMOTe SenSOR & POWeR InDICATOR When using the remote, aim it directly at this sensor. FROnT PAnel 8
Resumen del contenido incluido en la página 15
MENU BACK 1 4 7 WIDE VOL VOL 2 remote Control InPut Power Change the currently-displayed input. Turn TV on or off. enum I ex t Display the on-screen menu. Close the on-screen menu. w oarr ko OK Navigate the on-screen menu. Select the highlighted menu option. GuIde BC a k Display the info window. Go to the previous on-screen menu. V Bonutt Open the USB photo viewer. Volume uP/wnod Increase or decrease loudness of Channel uP/wnod the audio. Change the channel. utem 2 last Turn the a
Resumen del contenido incluido en la página 16
2 Replacing the Batteries 1. Remove the battery cover. 2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover. 10
Resumen del contenido incluido en la página 17
Connecting Your Devices 3 ConneCting A DeviCe Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc). Cable/Satellite Box 2. Turn the TV and your device off. 3. Connect the appropriate cable (not included) to the TV and the device. 4. Turn the TV and your device on. Set the TV’s input to match DVD/Blu-ray Player Game Console the connection you used (HDMI, Component, etc). • DIGITAL
Resumen del contenido incluido en la página 18
3 CONNECTING A DEVICE - AUDIO AND VIDEO CABLE TYPES Av CABLe CMP o onent CABLe HDM C i ABLe AV cables (or Composite cables) are the Component cables are designed to carry high HDMI is the intelligent, all-digital interface traditional way of connecting your devices to definition video signals along with additional that delivers both dazzling quality and your TV. Video signals are sent over the yellow audio connections. Colors are delivered with unmatched ease of use. HDMI technology connector
Resumen del contenido incluido en la página 19
3 ConneCting An AuDio DeviCe Your TV can output sound to an audio device, such as a receiver or sound bar. 1. Verify that your device has a video port that matches an Home Audio Receiver available port on the TV (HDMI, 3.5mm, etc). 2. Turn the TV and your audio device off. 3. Connect the appropriate cable (not included) to the TV and the device. 4. Turn the TV and your device on. VIZIO Sound Bar HDMI CABLE • CFC 2-WAY COMMUNICATION • 2.0-5.1 DIGITAL AUDIO • PCM, DTS, DOLY DIGITAL BEST 3.5M
Resumen del contenido incluido en la página 20
3 CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES 3.5MM CABLe HDM C i ABLe AV cables (or Composite cables) are the traditional way HDMI technology transmits crystal-clear digital of connecting your devices to your audio device. Audio multi-channel surround audio through a single HDMI signals are sent over the 3.5mm connector. cable. Audio Return Channel-enabled (ARC) TVs allow audio to be sent over an already connected HDMI cable, eliminating the need for a separate audio cable. See Conne
