Manual de instrucciones de VIORE LC4OVXF6OSB

Resumen del contenido incluido en la página 1

40" I080p LCD Television
LC4OVXF6OSB
AIR (TV)/CABLE MODE SELECTION
The Air/CABLE menu option is set to the "CABLE" (Cable Television) mode at the factory.
If you want to use an antenna for the built-in TV tuner, this menu option must be set to the
"Air" mode. Please refer to page 25 of the owner's manual for the details of this menu.
FOR QUESTIONS OR TECHNICAL SUPPORT
Please call: 1-877-777-1428
Please do not return this TV to the store.

Resumen del contenido incluido en la página 2

• Caution .......................................................................................... 1 • Safety Information ................................................................................ 2 • Names of each part(Front View) / Accessories ...................................................... 3 • Names of each part(Back View) .................................................................... 4 • Mounting on a Desktop / Installation Precautions ...................................

Resumen del contenido incluido en la página 3

The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in A the literature accompanying the appliance. Correct dispo

Resumen del contenido incluido en la página 4

To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety • The TV set should only be connected to a mains supply which matches that stated on the label. • To prevent overload, don't share the same mains supply socket with too many other items of equipment. • Do not place any connecting wires where: they may be stepped on or tripped over. • Do not place heavy items on them, wh

Resumen del contenido incluido en la página 5

m 4ran _!! _11 zl| _mn _mn ._ | | -0 m | | L._____J O TV/AV button- Input Source Select Button O POWER button MENU button- OSD Menu Display Button O LED Indicator CH+/- button - Channel/Program _,- Button _ Remote ControlWindow VOL+/- button - Volume + - Button ® The configuration of the components may look different from the following illustration. User's Manual User's Guide Power Cord Remote Control 3

Resumen del contenido incluido en la página 6

_) HDMI2 jack O AV OUTVIDEOand AUDIO(R/L) _ RF HDMII jack _ AV1 iN VIDEO and AUDIO(R/L) _, AC input jack O PCa.d AUDIO jack O S-VIDEO @ SWITCH AV2 iN VIDEO and AUDJO(RIL) O COAXIAL (Digital Audio out} Y,Pb,Pr jack(component} Power on e To turn on the LCD TV Press _ on the buttom of the LCD TV to _ first. ® Be sure to turn off the power and unplug both units from the wall outlet before making any connections. 4

Resumen del contenido incluido en la página 7

÷ Your LCD TV can be mounted on a Desktop as shown in the figure above. ÷ This is not floor-standing unit. ÷ Please secure enough space for safe use. (Please refer to A and B.) ÷ Installation of the LCD TV in an improperly ventilated location can cause a fire or damage to the LCD TV due to increased temperature. A (Mounting on a wall) ÷ Contact your dealer to purchase the "Adjustable-angle wall mount" required for wall-mounted installation. ÷ Do not install on an unstable location with support a

Resumen del contenido incluido en la página 8

÷ For connecting to ATSC or NTSC broadcasts O ] Wall Jack with F-Connector Coaxial (Round) Antenna Cable Analog+Digital 75 O external .... Antenna Press TV/AV button on the remote control to select TV, then press OK button to confirm. Then you can receive the ATSC/NTSC signal.

Resumen del contenido incluido en la página 9

÷Functions of remote control buttons The remote control is using Infra-Red (In). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. TV/AV POWER Press to display the input source Press to turn the TV on/standb menu CC Press to display the closed caption MUTE MTS Press to mute the sound. Press to select the audio channels. Press again or press VOL+ to FAV unmute. Press to display teh favorite channels list. EPG Press

Resumen del contenido incluido en la página 10

THUMBSTICK (_d T/,4/ _./OK) Allows you to navigate the on-screen menus and adjust the system settings to your preference. MENU Press to exit form the OSD menu. Press to display the OSD menu. TIMER RETURN Press to setup the sleep time Press to Return to the previous among: 5min, 10min, 15min, 30min, channel viewed. 45min, 60min, 90min, 120min, 180min, 240min and off. 8

Resumen del contenido incluido en la página 11

1. Check the polarity (+,-) of the batteries in the remote control. 2. Check that the batteries have power. 3. Check that the LCD TV is powered and that it is properly plugged in. 4. Check if any three-wavelength lamp, special fluorescent or neon sign is turned on near the LCD TV. 1. Open the cover completely. 2. Insert the two supplied batteries ( AA, 1.5V). Ensure that the polarities (+ and -) of the batteries are aligned correctly. 3. Silde back the cover. Step 1 Step 2 Step 3 CAUTION " Risk

Resumen del contenido incluido en la página 12

÷ Connecting to the Composite terminal _._ Connection terminals of other equipments differ by manufacturerand model. < VIDEO > t Composite Cable Connect the LCDTV's Composite In terminal to the VCR's Composite Out terminal using the Composite cable. (Make sure the color of the terminals and the color of the cable are the same) ÷ Connecting to the SoVideo terminal < VIDEO > t S-Video Cable TV/AV 1. Turn on the LCD TV and press on the remote control. 2. Use to move to"AV 1 or 2", press OK button t

Resumen del contenido incluido en la página 13

÷ Connecting to the Composite terminal ÷ In orderto watchCableTV, Subscribeto your localCableTV companyand installa separatereceiver(Set-Top-Box) _.."Connectionterminalsof other equipmentsdiffer by manufacturerand model• < Cable broadcasting receiver > Composite Cable Connect the LCD TV's Composite In terminal to the cable broadcasting receiver Composite Out terminal using the Composite cable• (Make sure the color of the terminals and the color of cable are the same) ÷ Connecting to SoVideo term

Resumen del contenido incluido en la página 14

÷ Connecting to the component terminaJ •_Connection terminals of other equipments differ by manufacturer and model. < DVD > 1. Connect LCD TV's Y, Pb,Pr terminal to DVD's Video Out terminal using the external cable. 2. Connect LCD TV's Audio terminals (left & right) in AV 1 to DVD's Audio Outterminal using the Audio cable. 3. It must match the component connection cable Y, Pb, Pr between the LCD TV and DVD Player. ÷ Connecting to the SoVideo terminal < DVD > ÷ S-Video cable can be used if there

Resumen del contenido incluido en la página 15

÷ Connection terminals of other equipments differ by manufacturer and model. PCAudio Cable • Connect LCD TV's PC Input terminal to PC's RGB terminal using the D-Sub cable. • Connect LCD TV's PC Audio terminal to PC's Audio terminal using the Audio cable. Only for PC's with Audio terminal) TV/AV 1. Turn on the LCD TV and press on the remote control. 2. Use to move to"VGA", press OK button to comfirm. 13

Resumen del contenido incluido en la página 16

÷ Connecting to the Audio Amplifier and Monitor ÷ Connection terminals of other equipments differ by manufacturer and model. Video Cable

Resumen del contenido incluido en la página 17

÷ Power on/off m m Press _ on the buttom of the LCD TV to _ first. •To turn the LCD TV on • Press "POWER" button on the LCD TV. •To turn the LCD TV off" Press "POWER" button on the LCD TV. •To turn on/off by remote control ' POWER Press the button of remote control. * You can select between the TV signal and the input signal of other equipments connected to the TV. ° Use this function to switch to the input source you wish to view. Press i button on the remote control. Use to move to the desired

Resumen del contenido incluido en la página 18

1. After you turn on the TV and select the input source, you should setup the on-screen menu. 2. Press MENU button to display the on-screen menu. 3. Press 4/I_ button to select the main menu: PICTURE, AUDIO, TIMER, SETUP, LOCK, CHANNEL. 4. Press • button to enter the main menu. PICTURE MENU: AUDIO MENU: Allows you to make adjustments to your picture settings. Allows you to customize the sound options and effects. (select TV source for example) (Select TV source for example) TIME MENU: SETUP MENU

Resumen del contenido incluido en la página 19

The PICTURE menu includes the following options " Picture Mode Cycles among picture display modes: Standard, Dynamic, Mild, Sports, User. Contrast Controls the difference between the brightest and darkest regions of the picture. Brightness Controls the overall brightness of the picture Color Controls the color. Tint Controls the fresh tones so they appear natural. Sharpness Control the amount of fine detail in the picture. Color Temp. Cycles among color modes: Normal, Coot, Warm. 17

Resumen del contenido incluido en la página 20

The SOUND menu includes the following options ' Sound Mode Allows you to select among: Flat, Music, Movie, Sports and User. Bass Controls the relative intensity of lower pitched sounds. Treble Controls the relative intensity of higher pitched sounds Balance To adjust the balance of the left and right sound track, or turn off the volume of the left and right sound track. Surround To turn on or off the Surround function. SPDIF Type Allows you to select between PCM and RAW. Audio Language Allows yo