Resumen del contenido incluido en la página 1
®
ViewSonic
NX1932W
LCD TV
- 使 用 手 册
- 使 用 手 冊
- User Guide
®
ViewSonic
Model No. : VS12197-2G
Resumen del contenido incluido en la página 2
Contents Important Safety Instructions........................................................................... 1 Copyright Information ...................................................................................... 2 Product Registration ........................................................................................ 2 Antenna Installation Instructions ..................................................................... 3 Cleaning the LCD TV ...................................
Resumen del contenido incluido en la página 3
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV” in this guide for further instructions. 7. D o not block any
Resumen del contenido incluido en la página 4
Copyright Information ® Copyright © ViewSonic Corporation, 2008. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improveme
Resumen del contenido incluido en la página 5
Antenna Installation Instructions 1. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges, Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding
Resumen del contenido incluido en la página 6
Getting Started ® Congratulations on your purchase of a ViewSonic LCD TV. Important! Save the original box and all packing material for future shipping needs. Package Contents Your LCD TV package includes: • LCD TV • Remote Control with batteries • Power Cord • ViewSonic User Guide • VGA Cable • Warranty Card* * Note: For Hong Kong area, there is no warranty card. Mounting ViewSonic LCD TV to the wall The LCD TV can be used in a free standing position or wall-mounted. Before installing the prod
Resumen del contenido incluido en la página 7
• Install the wall mount plate to the LCD TV using screws NO LONGER than 10mm, as longer screws found in universal (non-ViewSonic) wall mount kits may damage the power supply causing the unit to fail. The wall-mount screw type is M4 x L10. • Mount the wall mount bracket to the wall ensuring use of proper screws to support the installation. Ensure there is at least 3cm of space surrounding any air-vents of your LCD TV to allow adequate cooling during operation. • Hang the LCD TV wall moun
Resumen del contenido incluido en la página 8
Front View of the Product SOURCE 1 Select input source. Volume Down 2 Decrease sound volume or adjust a highlighted control while in OSD menu. Volume Up 3 Increase sound volume or adjust a highlighted control while in OSD menu. CH Down 4 Channel down when source is at TV or select a control while in OSD menu. CH Up 5 Channel up when source is at TV or select a control while in OSD menu. Menu 6 Turn OSD menu ON/OFF. Power ON/OFF button 7 Turn the power on from standby mode or turn the power off
Resumen del contenido incluido en la página 9
Rear View of the Product A Power (AC input) Connect to LCD TV and AC outlet with the power cord. B HDMI Input Terminal Connect this port to the HDMI output of A/V device. C VGA (15 pin) Signal Input Connect this port to the VGA output of your PC. D YPbPr / HD Component Video Input Connect the external video devices with component output to these jacks. E S-Video input Connect other devices, such as DVD or VCD to this port. F Composite Video input Connect other devices, such as DVD or VCD to this
Resumen del contenido incluido en la página 10
Remote Control ( For China area ) ( For Hong Kong area ) ViewSonic NX1932W 8 ENGLISH
Resumen del contenido incluido en la página 11
Remote control button function as follow 1 INPUT Select input source 2 ENTER Enter the function setting TV Swap between TV. Swap to TV when in other source 3 4 VOL+ and VOL- Adjust volume up or down 0~9 number button Switch channel number keys 5 POWER Power ON/OFF 6 7 UP/ DOWN /LEFT/ RIGHT UP/ DOWN/ LEFT/ RIGHT: Select or adjust the function of OSD MENU On Screen Display (OSD) menu ON/OFF 8 PROGRAM UP/ DOWN Select up or down programs 9 MUTE Volume mute ON/OFF 10 INFO Display current infor
Resumen del contenido incluido en la página 12
Installation 1. Insert Remote Control Batteries 1 Remove the battery cover by pulling then lifting the knob on the cover. 2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3 Reattach the battery cover. CAUTION • Only use the specified AA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a risk of fire or lead to personal injury. • Insert batteries according to (+) and (-) markings. Inserting the batt
Resumen del contenido incluido en la página 13
3. Connecting to DVD / Set Top Box Connect Video / Audio cables from compatible devices into the back panel of your LCD TV. 1) With AV cable: VCD or DVD Player RCA A/V Cable (not supplied) 2) With S-Video cable: S-Video Cable (not supplied) Audio in Cable (not supplied) VCD or DVD Player 3) With YPbPr cable: YPbPr Cable (not supplied) Audio in Cable (not supplied) VCD or DVD Player ViewSonic
Resumen del contenido incluido en la página 14
4) With HDMI cable: VCD or DVD Player (DVD Player should have the HDMI output terminal) HDMI Cable (not supplied) 5) With HDMI-DVI cable: Audio in Cable (not supplied) VCD or DVD Player (DVD Player should have the HDMI-DVI output terminal) HDMI-DVI Cable (not supplied) 4. Connecting to a computer 1) With VGA cable: Connect the VGA cable from VGA output of the computer to the VGA terminal input of your LCD TV. Also, connect the Audio In cable (green) from the audio output of your comput
Resumen del contenido incluido en la página 15
2) With HDMI-DVI cable: Connect the HDMI-DVI cable from the DVI output of the computer to the HDMI terminal input of the LCD TV. Also, connect the Audio In cable (green) from the audio output of your computer to the audio input terminal (green) of the LCD TV. PC Audio in Cable (not supplied) HDMI-DVI Cable (not supplied) 5. Connecting with the power cord Connect the power cord to the AC inlet at the back of your LCD TV, after all connections have been completed, and plug the other end of the
Resumen del contenido incluido en la página 16
Basic Operation To operate your LCD TV, you may use the TV remote control or buttons located at top of the LCD TV to select input source, change channels, or adjust volume. Turning on the LCD TV Before using the LCD TV: 1. Connect external equipment properly. 2. Insert the power plug. Power On/Off To turn the LCD TV on/off : Press the POWER button at the bottom of the LCD TV or press POWER button on your remote control to turn on/off the TV. The power LED indicator lights blue when the LCD T
Resumen del contenido incluido en la página 17
Using OSD Menu You are able to use OSD menus to adjust various settings by using your remote control or menu buttons on the front panel of the LCD TV. The basic operation is as following: t Press MENU to display OSD menu. t Press ◄► to cycle through the menus. t Press ENTER or ▲▼ to enter the menu you select. t Use ▲▼ to appoint your desired optional item. t Press ◄► to adjust the settings. t Press MENU to finish adjustment and press MENU again to exit the OSD menu. ViewSonic
Resumen del contenido incluido en la página 18
OSD Functions ADVANCED OPERATION—OSD MENU Picture Menu — To adjust the picture quality When input source is TV: When input source is AV, S-Video, YPbPr, HDMI: • Contrast: To adjust contrast of video. • Brightness: To adjust luminance of video. • Colour: To adjust colour. • Tint: To adjust tint level. • Sharpness: To adjust picture sharpness. • Colour Temp.: To select the screen colour temperature between Normal, Warm, and Cool. • Aspect Ratio: Press ◄► to select image size between
Resumen del contenido incluido en la página 19
Sound Menu — To adjust audio quality and status When input source is TV: When input source is AV, S-Video, YPbPr, HDMI or PC: • Bass: To adjust the bass. • Treble: To adjust the treble. • Balance: To adjust left and right audio balance. • AVC: To select automatic volume control circuitry (AVC) ON or OFF. (only available in TV mode) Setup Menu — To set up OSD window When input source is TV: When input source is AV, S-Video, YPbPr, HDMI or PC: • Sleep: Press ◄► to set the off tim
Resumen del contenido incluido en la página 20
Channel Menu — To setup for TV It is only active in TV source. • Auto Scan: To automatically preset the channels into TVs memory. Kindly suggest you auto scan all the channels before watching your TV for the first time. Note: After auto scan all the channels, you need not to do it again when turning on your TV next time. *China TV system: PAL D/K/I. • Manual Search: The function is to give a minute search for possible existing channels and store them in memory. 1. Press ► to get i
