Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
English User Manual DIGITAL Series “Register your TV online at: www.toshiba.co.uk/registration” English - 1 - 0 02_MB62_[GB]_(01-TV)_IDTV_(22145LED_1910UK)_BRONZE19_10076310_10077288_50207491.indd 1 2_MB62_[GB]_(01-TV)_IDTV_(22145LED_1910UK)_BRONZE19_10076310_10077288_50207491.indd 1 0 06.02.2012 13:03:57 6.02.2012 13:03:57
Resumen del contenido incluido en la página 3
English Digital Switchover switchover, and you won’t need to re-tune. Keep this Television in the UK is going digital, bringing us all more choice and new services. Starting in late 2007 important information about how to re-tune your TV and ending in 2012, television services in the UK will during the digitalTV switchover go completely digital, TV region by TV region. How to re-tune: Please se
Resumen del contenido incluido en la página 4
English Re-tuning: TOSHIBA Freeview Products Toshiba Digital TV This guide can be used to help you re-tune the following product with the remote control below. Make sure your TV is on and press 80 for the BBC News channel 1 ) Press MENU and press ◄ or ► to select Install and Retune and press OK. Press ▲ or ▼ to select Automatic channel scan (Retune) to start the process. 2 ) Select the desired search mode using ► and press OK button. 3 ) Whenever you select an automatic sea
Resumen del contenido incluido en la página 5
English Manual Re-tuning If your Freeview TV or box picks up a different regional service to your preferred service (e.g. BBC England instead of BBC Scotland, or ITV Central instead of ITV Anglia), you can use this manual re-tune If you are missing some services you may fi nd they have moved to channel 800 or above, this guide will help you put them in your preferred position. If you fi nd manual re-tuning too diffi cult, contact your local electrical retailer or installer. This is a guide only
Resumen del contenido incluido en la página 6
English 4 ) Write down the “RF Channel” numbers for your transmitter using the Group boxes here: 5 ) Press MENU and use ◄ or ► to select Install and Retune. 6 ) Select Manual Channel Scan from the Installation menu and press OK. 7 ) Select Search Type as Digital by using ◄ or ►. 8 ) Select Channel and use ◄ or ► to change the channel number. 9 ) Press OK to start search. 10 ) Press MENU button. You should fi nd that you now have your preferred service installed. English - 5 - 02_MB62_[
Resumen del contenido incluido en la página 7
English Contents Sharpness......................................................... 22 Digital Switchover ................................................... 2 Colour ............................................................... 22 Re-tuning: TOSHIBA Freeview Products ................ 3 Power Save Mode ............................................ 22 Manual Re-tuning ................................................... 4 Backlight (optional) ........................................... 22 Safety
Resumen del contenido incluido en la página 8
English Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equip- ment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased. Air Circulation Do not Leave more than 10cm clearance around the
Resumen del contenido incluido en la página 9
English Installation and Important Information Where to install * Button and stand style is dependent on model. Locate the television away from direct sunlight and strong or damage the screen. Also, please be certain that small items lights. Soft, indirect lighting is recommended for comfortable cannot be inserted into slots or openings in the case. viewing. Use curtains or blinds to prevent direct sunlight Avoid u
Resumen del contenido incluido en la página 10
English Important safety information USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. Headphone Warning Loud music can damage your hearing irreversibly. Do not set the volume to a high level when listening through headphones, particularly for extended listening periods. Information for the DVB-T function • Any function
Resumen del contenido incluido en la página 11
English Important safety information (continued) • The unit becomes warm when in operation. Do not place • This set should only be connected to a 220-240V AC 50Hz mains power supply. Do not attempt to connect it to any other any covers or blankets on the unit in order to prevent type of supply. overheating. The ventilation holes should not be blocked. Do not set up • The socket outlet must be installed near the equipment and is easily accessible. near radiators. Do not place in direct sun
Resumen del contenido incluido en la página 12
English Removing the pedestal stand Removing the pedestal stand (1) Carefully lay the front of the TV face down on a fl at, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface. Note: Extreme care should always be taken when removing the pedestal stand to avoid damage to the LCD panel. (2) Remove the four screws on the stand. This will allow removal of the pedestal stand. (3) Once you have removed four screws holding the pedestal stand in place,
Resumen del contenido incluido en la página 13
English The Remote Control Simple at-a-glance reference of your remote control. Inserting Batteries and Effective Range of the Remote Control Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for
Resumen del contenido incluido en la página 14
English Connecting External Equipment Before connecting any external equipment, remove the mains plug from the wall socket. You can use YPbPr to VGA cable (not supplied) to enable Aerial cable:........................................................... YPbPr signal via VGA input. Connect the aerial to the ANT. socket on the rear of the TV. WARNING: You cannot use VGA and YPbPr at the same SCART lea
Resumen del contenido incluido en la página 15
English ® Connecting an HDMI or DVI Device to the HDMI Input The HDMI input on your TV receives digital audio and To Connect a DVI Device uncompressed digital video from an HDMI source device Connect an HDMI-to-DVI adaptor cable (HDMI type A connec- or uncompressed digital video from a DVI (Digital Visual tor) to the HDMI input socket and audio cables to the SIDE AV Interface) source device. socket, using the supplied Side AV connection cable’s RED This input is designed to accept HD
Resumen del contenido incluido en la página 16
English Connecting a Computer Connecting a USB Memory To Connect a Computer Connect a USB Memory • You can connect a USB memory to your TV by using With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the TV and hear the sound from the USB input of the TV. This feature allows you to the TV’s speakers. display/play music, photo or video fi les stored in a When connecting a PC to the RGB/PC input on TV, use an USB memory. analogue RGB (15-pin) computer cable an
Resumen del contenido incluido en la página 17
English Power Save Mode Environmental Information This television is designed to consume less energy to save environment. You not only help to save the environment but also can save money by reducing electricity bills, thanks to the energy effi ciency feature of this TV. To reduce energy consumption, you should take the following steps: You can use Power Save Mode setting, located on page 22. If you set Power Save Mode as On, the TV will switch to energy-saving mode and luminance level of TV
Resumen del contenido incluido en la página 18
English Controlling the TV A wide variety of external equipment can be connected via the sockets located on the side and back of the TV. Whilst all the necessary adjustments and controls for the TV are made using the remote control, the button on the left side of the TV may be used for some functions. Switching on Using the Remote Control If the standby LED is unlit, check that the mains plug is con- Press the MENU button on the remote control to see the menu
Resumen del contenido incluido en la página 19
English Initial Installation Before switching on the TV, put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your TV. To set up the TV, use the buttons on the remote control as detailed on page 12. IMPORTANT: Ensure that the aerial is connected and a Common Interface module is not inserted before switching on the TV for the fi rst time installation. 1. Connect the mains plug and switch the TV to on using the side control switch. If the
Resumen del contenido incluido en la página 20
English Basic Operations Stereo and Bilingual Transmissions Standby Notifi cations If the TV switches off while in No Signal mode, the If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time posi- following on-screen message will be displayed on the tions are changed, disappearing after a few seconds. If the next switch-on: broadcast is not in stereo, the word Mono will appear. Stereo… Press LANG. to select Stereo or Mono. Bilingual…
