Resumen del contenido incluido en la página 1
TOSHIBA
XV***
Digital
Series
Resumen del contenido incluido en la página 2
Contents SETTING UP Safety precautions – Some do’s and don't for you to be aware of 4 Installation and important information 5 The remote control – an at-a-glance guide 6 Connecting external equipment – a guide to connecting external equipment to the back of the television 7 REGZA-LINK connections 8 Connecting an HDMI or DVI device to the HDMI input 9 Connecting a computer – connecting a computer to the HDMI terminal on the back of the television 10 Acceptable signals through HDMI terminals 11 C
Resumen del contenido incluido en la página 3
Contents (continued) Software Upgrade – auto upgrade, searching for new software, software licences, system information, reset TV 40 Media player – auto start, opening media player automatically, opening media player from the menu 41 Media player – multiview, single view, slideshow, interval time and repeat 42 Media player – playing movies, picture size and repeat, DivX® VOD 43 Media player – playing music, repeat mode 44 Media player – setting up the photo frame feature 45 PC settings for R
Resumen del contenido incluido en la página 4
Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased. DO NOT REMOVE ANY FIXED COVERS AS THIS Air Circulation WILL EXPOSE DANGEROUS
Resumen del contenido incluido en la página 5
Installation and important information Where to install Locate the television away from direct sunlight and strong Side View Top View lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling Sturdy tie (short as possible) on the screen. Fixing strap Place the TV on a stable, level surface that can support the Stand weight of the TV. In order to maintain stability and prevent it clip falling over, secure the TV to the level
Resumen del contenido incluido en la página 6
The remote control Simple at-a-glance reference of your remote control. To select mode For On/Standby mode Number buttons To select input from external sources, Audio description analogue or digital TV. To mute the sound To change programme positions and To alter the volume text pages Quick menu To display the digital on-screen To exit Menus Programme Guide When using menus the arrows move the cursor on the screen up, down, left or To display on-screen information right. OK to confirm your sele
Resumen del contenido incluido en la página 7
The cable holders can be used for aerial, media recorder and audio cables. Do not use as handles and remove all cables before moving the television. Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. OPTICAL DIGITAL AUDIO OUTPUT HDMI INPUT SOCKETS COMPONENT VIDEO INPUT (EXT3) SCART 2 (EXT2) SCART 1 (EXT1) FIXING STRAP CABLE HOLDER Decoder* Media Recorder Aerial cables: PLEA
Resumen del contenido incluido en la página 8
REGZA-LINK connections The basic functions of connected audio/video equipment can be controlled using the televisions remote control if a REGZA-LINK compatible device is connected. The back of your television AV amplifier Playback equipment HDMI IN HDMI OUT HDMI OUT Playback equipment HDMI OUT NOTE: It is recommended that for correct operation all NOTE: The REGZA-LINK feature uses CEC Technology as audio/video devices are connected using HDMI cables regulated by the HDMI standard. This feature i
Resumen del contenido incluido en la página 9
Connecting an HDMI or DVI device to the HDMI input The HDMI input on the television receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High-Bandwidth Connecting a DVI Device Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic Connect an HDMI-to-DVI adaptor cable (HDMI type A devices
Resumen del contenido incluido en la página 10
Connecting a computer via HDMI With the HDMI connection, you can watch your computer’s display on the television and hear the sound from the televisions speakers. Connecting a PC to the HDMI Terminal the back of your television HDMI-to-DVI adaptor cable Audio cable for PC to television Computer connection (not supplied) When connecting a PC to the HDMI terminal on the PLEASE NOTE: television, use an HDMI-to DVI adaptor cable and an It is possible that some PCs when connected may not analogue aud
Resumen del contenido incluido en la página 11
Acceptable signals through HDMI terminals The HDMI inputs on this television only accept VGA, SVGA, XGA, WXGA and SXGA signal formats which are compliant with VESA as shown in the table below. The input signals for some PCs and HDMI or DVI devices are different from the resolution and frequencies listed and this may cause the following; incorrect display, false format detection, picture position failure, blur or judder. These problems may be resolved by setting the monitor output format on the
Resumen del contenido incluido en la página 12
Connecting a computer via RGB/PC Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. The back of your television Audio cable for PC to television connection (not supplied) Computer Mini D-sub 15 pin connector RGB PC cable (not supplied) Conversion adaptor if required (not supplied) Connect the PC cable from the computer to the PC terminal Pin assignment for RGB/PC terminal on the back of the television, t
Resumen del contenido incluido en la página 13
Acceptable PC signals through the PC terminal The PC input on this television only accepts signal formats which are compliant with VESA-DMT as shown in the table below. Some PCs input signals are different from the resolution and frequencies listed and this may cause the following; incorrect display, false format detection, picture position failure, blur or judder. These problems may be resolved by setting the monitor output format on the PC to conform to any of the signals listed in the table
Resumen del contenido incluido en la página 14
Input 3 (side) will take priority over EXT3 (back) if both connections are used at the same time. Using the Controls Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. Standby USB JPEG VIEWER This socket has limited functionality and Toshiba can take no RETURN responsibility for OK damage to other connected equipment. SD Card slot HDMI4 INPUT allows access (Model dependant) to
Resumen del contenido incluido en la página 15
Tuning the television for the first time Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected. To set up the television use the buttons on the remote control as detailed on page 6. Press the button, the Quick Setup screen will When the search is complete the television will i 1 appear. This screen will appear the first time that automatically select position one. the television is switched on and each time Re
Resumen del contenido incluido en la página 16
Setting Antenna or Cable Scan Type Ant/Cable In (if available) There are two options, Full Scan and Quick Scan. Quick Scan is a simplified version of Full Scan and takes less time to complete. If this feature is available the television can be configured to either Antenna or Cable. If the setting is changed the Start Frequency Auto Tuning screen will automatically appear (if a Pin This sets the frequency from which the scan will start. Code has been set this will have to be entered in order End
Resumen del contenido incluido en la página 17
DTV auto tuning, manual tuning, manual tuning for DVB-C NOTE: As new services are broadcast it will be necessary to re-tune the television in order to view them. Auto Tuning Manual Tuning Auto tuning will completely re-tune the television and can This feature is available for service engineers or can be be used to up date the channel list. used for direct channel entry if the multiplex channel It is recommended that DTV Auto tuning is run is known. periodically to ensure that new services are
Resumen del contenido incluido en la página 18
DTV location, auto channel update, DVB character set, Analogue switch off Location DVB Character Set The character set to be used for DVB-C or DVT-B There are two options available Home and Store. Store channels can be set manually is for use when a television is being used for display, i.e. in (Standard – Table 0 or Western – Table 5). shops etc. Home is recommended for normal home use. In the SETUP menu press e to highlight DTV Press MENU and use or to select SETUP. z x 1 1 Settings and
Resumen del contenido incluido en la página 19
DTV sorting channels, skipping channels NOTE: When the television is switched off the mode being viewed at the time will automatically be selected when the television is switched back on. Sorting Channels Skipping Channels The channel order may be changed to suit personal This feature allows the setting of channels that will be preference. skipped when using PQ and PP. However, skipped channels can still be accessed by direct number entry. Press MENU and select the SETUP menu. 1 Press MENU and
Resumen del contenido incluido en la página 20
Different Channel numbers may be displayed ATV manual tuning The television can be tuned-in manually using ATV Manual Tuning. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System. Use and to move across the screen and select any of these ATV Manual Tuning options, then f and e to adjust the settings. z x Position System Colour Skip Signal Channel Search Manual Station System Class Fine Tuning Position: The num
