Resumen del contenido incluido en la página 1
OPERATING INSTRUCTIONS
TLM-1705 / TLM1905
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
PREFACE FCC Compliance Statement This device complies with part 15 of the FCC Rules. Opeartion is subjected to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro
Resumen del contenido incluido en la página 4
The Federal Communications Commission warns that changes or modifications of the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CE mark for Class B ITE (Following European standard EN55022/1998; EN61000- 3-2/1995; EN61000-3-3/1995, EN55024/1998, EN60950/1992+A1+A2+A3+A4+A11) Radio Frequency Interference Statement Warning: This is a Class B product. In a domestic environment, this product may cause radio int
Resumen del contenido incluido en la página 5
Important Operating Instructions Please read the following instructions carefully. This manual should be retained for future use. 1. To clean the LCD monitor screen, first, make sure the monitor is in the power off mode. Unplug the monitor from its power source before cleaning it. Do not spray liquid cleaners directly onto the unit. Without applying excessive pressure, clean the screen with a slightly dampened rag. 2. Do not place your LCD monitor near a window. Exposing the monitor
Resumen del contenido incluido en la página 6
Introduction CONTENTS PREFACE .....................................................................................................................I CHAPTER 1................................................................................................................. 1 Unpacking 1 Identifying Components 2 The LCD Multimedia Monitor — Front View 2 The LCD Multimedia Monitor — Rear View 2 Adjusting the Tilting Angle 3 Raising Your Monitor to an Upright Position and Adjusting Mon
Resumen del contenido incluido en la página 7
CHAPTER 1 The LCD Multimedia Monitor Unpacking After you unpack your LCD multimedia monitor, make sure the following items are included in the box and in good condition: Standard Item • LCD multimedia monitor • Monitor-to-PC analog signal cable (15-pin) • Monitor-to-PC digital signal cable (24-pin) – (Optional) • Power cord • Addendum • User’s manual • 1.5M Stereo Jack audio cable If you find that any of these items are missing or appear damaged, contact your dealer immed
Resumen del contenido incluido en la página 8
Identifying Components The LCD Multimedia Monitor — Front View Figure 1-1: The LCD multimedia Monitor Front View 1. Power-On Indicator This LED indicator stays lit when the power is on and blinks when the LCD multimedia monitor is in power saving mode. 2. Monitor Stand 3. LCD Screen 4. LCD Multimedia Monitor Control Panel Refer to Chapter 2 for a detailed. The LCD Multimedia Monitor — Rear View Figure 1-2: LCD Multimedia Monitor Rear View 2
Resumen del contenido incluido en la página 9
1. Audio Line-in 2. AC Power Jack 3. VGA (Analog) Cable With 15-Pin D-Sub VGA Connector (Male) 4. S-Video connector 5. AV connector 6. Digital VGA (DVI) Cable Connector (Optional) Adjusting the Tilting Angle The LCD multimedia monitor’s angle settings range from -3° to 20°. See Figure 1-3. Figure 1-3: Tilting the Monitor 3
Resumen del contenido incluido en la página 10
Raising Your Monitor to an Upright Position and Adjusting Monitor Angle 4
Resumen del contenido incluido en la página 11
Power Management System The LCD multimedia monitor complies with the VESA DPMS power management proposal. When the LCD multimedia monitor is in power saving mode or detects an incorrect timing, the monitor screen will be blank and the power LED indicator starts blinking. 5
Resumen del contenido incluido en la página 12
CHAPTER 2 The Display Controls LCD Multimedia Monitor Control Panel Figure 2-1: The LCD Monitor Panel 1. OSD Menu Button Press this button to pop up the OSD (On-Screen Display) menu. This button is also a Function Select button. 2. Adjustment Control Buttons These two buttons allow you to adjust the selected control functions in the OSD. 3. Function Select Buttons These two buttons allow you to select the control functions in the OSD. Press either button to scroll through the mai
Resumen del contenido incluido en la página 13
Adjusting the Monitor’s Display OSD Main Menu To access the OSD main menu, press the OSD Menu button. Use the Function Select buttons to scroll between the OSD main menu options. The option that is currently selected is blinking. Pressing one of adjustment control buttons causes the following screen to appear: Figure 2-2: The OSD Main Menu ◆ANALOG MODE: When analog signal input is selected. MONITOR-CONTROL Option The Monitor-Control option allows you to adjust the LCD monitor’s d
Resumen del contenido incluido en la página 14
H-POSITION: To move the LCD monitor’s display left or right on a horizontal plane. V-POSITION: To move the LCD monitor’s display up or down on a vertical plane. PHASE: To adjust the focus and clarity of the display. CLOCK: To adjust the display pixel alignment. RESET: To reset all of the Monitor-Control submenu settings to the factory default. GRAPHIC/TEXT: Press the adjustment control button to switch between text and graphic display modes. PORT-SELECT: T
Resumen del contenido incluido en la página 15
EXIT: To exit the OSD-Control submenu. GRAPHIC-CONTROL Option The Graphic-Control option lets you make adjustments that effect the contrast, brightness and color of the LCD monitor’s display. Press the Adjustment control button to display the submenu. CONTRAST: To adjust the contrast level of the display screen. BRIGHTNESS: To adjust the light level on the display screen. COLOR: To select the LCD monitor’s color display. The available options are 9300, 6500 and
Resumen del contenido incluido en la página 16
Press the Adjustment control button to display the submenu. LANGUAGE: The supported languages include German, English, French, Spanish, Italian and Japanese. AUDIO VOLUME: To increase or decrease the volume of the LCD monitor’s sound system. INFORMATION: To indicate display mode timings and firmware version. EXIT: To exit the Misc-Control submenu. OSD EXIT Option Use the OSD Exit item to close the OSD menu. The OSD will disappear by itself if left inactive. ◆DIG
Resumen del contenido incluido en la página 17
OSD-CONTROL Option The OSD-Control menu option lets you adjust the position of the OSD on the screen. Press the Adjustment control button to display the submenu. Use the Function Select buttons to select one of the following submenu options: OSD-H-POSITION: To change the position of the OSD on a horizontal plane. OSD-V-POSITION: To change the position of the OSD on a vertical plane. OSD-TIMER: The OSD menu display time can be set at 5, 10, 15, 20, 25 or 30 seconds.
Resumen del contenido incluido en la página 18
MISC-CONTROL Option The Misc-Control menu option lets you select the OSD display language, adjust the audio volume setting and view system information. Press the Adjustment control button to display the submenu. LANGUAGE: The supported languages include German, English, French, Spanish, Italian and Japanese. AUDIO VOLUME: To increase or decrease the volume of the LCD monitor’s sound system. INFORMATION: To indicate display mode timings and firmware version. EXIT: To exi
Resumen del contenido incluido en la página 19
EXIT: To exits the Monitor-Control submenu. OSD-CONTROL Option The OSD-Control menu option lets you adjust the position of the OSD on the screen. Press the Adjustment control button to display the submenu. Use the Function Select buttons to select one of the following submenu options: OSD-H-POSITION: To change the position of the OSD on a horizontal plane. OSD-V-POSITION: To change the position of the OSD on a vertical plane. OSD-TIMER: The OSD menu display time can be
Resumen del contenido incluido en la página 20
SATURATION: To adjust the color level you prefer. SHARPNESS: Press the adjustment button to optimize the sharpness for your specific application. RESET: To reset all of the Video-Control submanu settings to the factory default. EXIT: To exit the Video-Control submenu. MISC-CONTROL Option The Misc-Control menu option lets you select the OSD display language, adjust the audio volume setting and view system information. Press the Adjustment control button to display t
