Resumen del contenido incluido en la página 1
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION
20” Digital / Analog
LCD TV
Owner’s Manual
CLC200YM8
TO RECEIVE DIGITAL/ANALOG SIGNAL,
YOU MUST CONNECT ANTENNA.
IF YOU NEED ADDITIONAL ASSISTANCE WITH SETUP OR OPERATING AFTER
READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-242-7158, OR
VISIT OUR WEB SITE AT http://www.Symphonic.us
© 2007 Funai Electric Co., Ltd.
Resumen del contenido incluido en la página 2
NTRODUCTION I WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC RISK OF ELECTRIC SHOCK SHOCK IS PRESENT WITHIN THIS UNIT. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, THIS SYMBOL INDICATES THAT THERE ARE DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE IMPORTANT OPERATING AND MAINTENANCE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVI
Resumen del contenido incluido en la página 3
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Precautions LAMP IN LCD CONTAINS MERCURY, DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAW. C A UTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. FC C W ARNING T his equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual. The
Resumen del contenido incluido en la página 4
NTRODUCTION I LOCATION For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes. • Ins
Resumen del contenido incluido en la página 5
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Features Contents • DTV/TV/CATV INTRODUCTION - Y ou can use your remote control to select channels which Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 are broadcast in digital format and conventional analog Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 6
NTRODUCTION I Remote Control Function 1. POWER button (p11) 10. RETURN button Press to turn the unit on and off. P ress to return to previous menu 2. MUTE button (p13) operation. 1 11 Press to turn the sound on and off. 11. INPUT button (p14) 2 12 3. SLEEP button (p16) • P ress to access connected an 3 13 Press to activate the sleep timer. external device like a DVD player 4. Number buttons (p13) or VCR. 14 • P ress to select channels. • Press to switch between the 4 -/ENT. button
Resumen del contenido incluido en la página 7
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Control Panel 1 1. SETUP button (p12) 2 Press to display the main menu. 3 X Y 2. VOLUME / buttons (p13) 4 X Y P ress to adjust the volume or move right( )/left( ) 5 through the main menu items. SETUP VOLUME CHANNEL INPUT POWER K L 3. CHANNEL / buttons (p13) P ress to select channels or move up/down through the main menu items. top of the unit 4. INPUT button (p14) • P ress to access connecte
Resumen del contenido incluido en la página 8
ONNECTION C Cables not included. Please purchase the necessary cables at your local store. Basic Connection This section describes how to connect the unit to an antenna, cable/satellite box, etc. Note: • Be sure your antenna or other device is connected properly before plugging in the power cord. [Antenna Cable Connection] When connecting the unit to an antenna or cable TV company (without cable/satellite box) Connect the RF coaxial cable on your home outlet to the antenna input jack of this
Resumen del contenido incluido en la página 9
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Cables not included. Please purchase the necessary cables at your local store. External Device Connection [Component Video Cable Connection] Component video connection offers better picture quality for video devices connected to the unit. Use a component video cable to connect the unit to external video devices equipped with component video output jacks. If you connect to the unit’s component video
Resumen del contenido incluido en la página 10
ONNECTION C Cables not included. Please purchase the necessary cables at your local store. [Video Connection] Video connection offers standard picture quality for video devices connected to the unit. If you connect to the unit’s video input jack, connect RCA audio cables to the audio L/R jacks of VIDEO1. When the audio jack of the video device is monaural, connect the RCA audio cable to the audio L input jack. rear of this unit VIDEO 2 COMPONENT AUDIO Y Pb Pr LR VIDEO 1 e.g.) AUDIO S-VIDEO VIDEO
Resumen del contenido incluido en la página 11
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION NITIAL SETTING I These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Initial Setup Note: • If you connect the cable system directly, contact the CATV This section will guide you through the unit’s initial setting which includes installer. selecting a language for your on-screen menu and “AUTO PRESET CH”, which • If you press [POWER] or
Resumen del contenido incluido en la página 12
NITIAL SETTING I • BACK LIGHT • When the scanning and memorizing ar e completed, You can set the desired brightness mode. the lowest memorized channel will be displayed. (Refer to “Back Light Setting” on page 21.) • When y ou selected “AUTO PRESET CH(TV/DTV)”, the lowest memorized analog channel will be displayed • COLOR TEMP. when the scanning and memorizing are completed. You can adjust color temperature (“NORMAL”, “WARM”, If there is no analog channel, the lowest memorized “COOL
Resumen del contenido incluido en la página 13
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION ATCHING TV W Channel Selection Volume Adjustment K Select channels by using [CH. /L] or [the Number buttons]. This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. • T o select the memorized channels, Use [VOL. X/Y] to adjust the audio volume. K use [CH. /L] or [the Number buttons]. • To select the non-memorized channels, use [
Resumen del contenido incluido en la página 14
ATCHING TV W Switching Each Mode Switching Audio Mode You can easily switch with the remote control to the DTV (ATSC) and TV This section describes how to switch the audio in the analog mode and how (NTSC) or to access an external device when they are connected to the unit. to switch the audio language in the digital mode. TV While receiving an MTS broadcast, press [AUDIO ] Press [INPUT] repeatedly to cycle through the input modes. repeatedly to cycle through the available audio channel
Resumen del contenido incluido en la página 15
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. TV DTV In the digital mode, the detailed broadcasting information for the current In the analog mode, the current channel number is displayed. channel such as program title, program guides are displayed. Press [DISPLAY ]. Press [DISPLAY ] repeatedly to cycle through the
Resumen del contenido incluido en la página 16
ATCHING TV W TV Screen Display Mode Sleep Timer DTV The sleep timer can be set to automatically turn off the unit after an incremental period of time. 2 types of display modes can be selected in the digital mode when the broadcasting station is sending 16:9 video signal. Press [SCREEN MODE ] repeatedly to switch the TV Press [SLEEP ] to set the sleep timer. 1 aspect ratio. SLEEP OFF • Sleep timer display appears on the TV screen. Press [SLEEP ] repeatedly to change the amount of 2 t
Resumen del contenido incluido en la página 17
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION PTIONAL SETTING O Channel Add/Delete The channel add/delete function lets you add the channel that was not added by the auto channel scan due to the reception status at the initial setting. You can also delete the unnecessary channels. Press [SETUP] to exit. Press [SETUP] to display the main menu. 1 6 Note: Use [Cursor K/L] to select “CHANNEL SETUP”, then • ”ADD/DELETE(DTV)” or “ADD/DELETE” men
Resumen del contenido incluido en la página 18
PTIONAL SETTING O Picture Adjustment Closed Caption You can adjust brightness, contrast, color, tint and sharpness. TV You can view closed captioning (cc) for TV programs, movies and news. Closed caption refer to text of dialogue or descriptions displayed on-screen for the hearing impaired. Press [SETUP] to display the main menu. Press [SETUP] to display the main menu. 1 1 Use [Cursor K /L] to select “PICTURE”, then press Use [Cursor K /L] to select “CAPTION”, then press 2 2 [ENTER]. [ENTER
Resumen del contenido incluido en la página 19
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION DTV Closed Caption DTV In addition to the basic closed caption described on page 18, DTV has its own closed caption called DTVCC. Use this menu to change the settings for DTVCC. Press [SETUP] to exit. Press [SETUP] to display the main menu. 3 1 Note: Use [Cursor K /L] to select “DTVCC“, then press • To show the closed caption on your TV screen, broadcast 2 signal must contain the closed captio
Resumen del contenido incluido en la página 20
PTIONAL SETTING O DTVCC Style DTV You can change the style of DTV CC such as font, color or size, etc. Press [SETUP] to display the main menu. • CAPTION SIZE 1 Closed captioning font size can be changed as below. • FONT STYLE Font style of the displayed caption can be switched as below. Use [Cursor K /L] to select “DTVCC“, then press • CHARACTER EDGE 2 [ENTER]. Edge type of the displayed caption can be switched as below. e.g.) digital TV mode • FORE COLOR, BACK COLOR - TV SETUP
