Resumen del contenido incluido en la página 1
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION
Owner’s Manual
LC320SS9 B
LC320SS9 A
LC320SS9
HIGH-DEFINITION TELEVISION
TO RECEIVE DIGITAL/ANALOG SIGNAL,
YOU MUST CONNECT ANTENNA.
© 2008 Funai Electric Co., Ltd.
NEED HELP?
PLEASE CALL TOLL FREE!
1-800-968-3429
OR VISIT OUR WEB SITE AT
www.sylvania-ce.com
Resumen del contenido incluido en la página 2
NTRODUCTION I The model and serial numbers of this unit may be found on the cabinet. Model No.: You should record and retain those numbers for future reference. Serial No.: Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. The lightning flash with arrowhead symbol, within an CAUTION
Resumen del contenido incluido en la página 3
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 3.2 inches (8cm) or more around this apparatus. Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only
Resumen del contenido incluido en la página 4
f f f r r o o n n t t s s i i d d e e NTRODUCTION I Attaching the Stand You must attach the stand to the unit to display upright. Be sure the front and rear of the stand match the proper direction. Spread a thick and soft cloth over a Insert the stand all the way to the Drive Phillips pan screws in the 3 1 2 3 table. main unit slowly until it clicks. threaded holes at the bottom of the Place the main unit face down onto it. Make sure not to put the AC cord stand with a screwdriver tight
Resumen del contenido incluido en la página 5
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Features Contents • DTV/TV/CATV INTRODUCTION - You can use your remote control to select Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 channels which are broadcast in digital format and Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 conventional analog f
Resumen del contenido incluido en la página 6
NTRODUCTION I Buttons on the Remote Control 1. POWER (p13) 11. SLEEP (p16) Press to turn the unit on and off. Press to activate the sleep timer. 2. Number buttons (p16) 12. AUDIO (p17) Digital Mode (DTV) • Press to select channels. - (hyphen) • Press to select the audio • Press to shift the minor channel language. Analog Mode (TV) from the major channel. • Press to select the audio mode. 3. SETUP (p14) 13. STILL (p17) Press to display the main menu. Press to pause screen image. K L 4. s / B
Resumen del contenido incluido en la página 7
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Control Panel 1. POWER (p13) side of this unit Press to turn the unit on and off. 2. INPUT SELECT/ENTER (p17) • Press to access connected external devices like a 1 DVD player or VCR. • Press to decide the command of setting when the 2 menu is displayed. 3 K L 3. CHANNEL / (p16) Press to select channels or move up/down through the main menu items. 4 X Y 4. VOLUME / (p16) X Y 5 Press to adjust
Resumen del contenido incluido en la página 8
REPARATION P Cables not included. Please purchase the necessary cables at your local store. Basic Connection This section describes how to connect the unit to an antenna, cable/satellite box, etc. Note: • Be sur e your antenna or other device is connected properly before plugging in the power cord. [Antenna Connection] Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit. e.g.) VHF / UHF rear of this unit antenna RF coaxial cable or cable TV company * Once c
Resumen del contenido incluido en la página 9
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Cables not included. Please purchase the necessary cables at your local store. External Device Connection [HDMI Connection] HDMI (High-Definition Multimedia Interface) transports high definition video and multi-channel digital audio through a single cable. It ensures that the content sent from the source to the unit is of the highest possible resolution. Use an HDMI cable to connect the unit to ex
Resumen del contenido incluido en la página 10
REPARATION P Cables not included. Please purchase the necessary cables at your local store. [Component Video Connection] RCA component video connection offers better picture quality for video devices connected to the unit. Use an RCA component video cable to connect the unit to external video devices equipped with component video output jacks. If you connect to the unit’s COMPONENT1 or COMPONENT2 video input jacks, connect an RCA audio cable to the audio L/R jacks of COMPONENT1 or COMPONENT2 a
Resumen del contenido incluido en la página 11
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Cables not included. Please purchase the necessary cables at your local store. [Video Connection] RCA video connection offers standard picture quality for video devices connected to the unit. Use an RCA video cable to connect the unit to external video devices equipped with video output jack. If you connect to the unit’s VIDEO1 or VIDEO2 video input jack, connect an RCA audio cable to the audio L/R
Resumen del contenido incluido en la página 12
REPARATION P Cables not included. Please purchase the necessary cables at your local store. [PC Connection] This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a computer monitor. e.g.) VGA cable should be rear of this unit with ferrite core. VGA cable PC-IN AUDIO HDMI-IN L AUDIO R mini-plug audio cable personal computer The following signals can be displayed: Format Resolution V. Frequency SVGA 800 x 600 60Hz XGA 1024 x 768 60Hz WXGA 1280 x
Resumen del contenido incluido en la página 13
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION NITIAL SETTING I These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Note: Initial Setup • If you connect the cable system directly, contact the CATV This section will guide you through the unit’s initial setting which includes installer. selecting a language for your on-screen menu and auto channel scan, • If you press [POWER] or [SETUP]
Resumen del contenido incluido en la página 14
NITIAL SETTING I Main Menu Auto Channel Scan This section describes the overview of the main menu displayed when you If you switch wires (e.g., between antenna and CATV) or if you move the press [SETUP]. For more details, see the reference page for each item. unit to a different area after the initial setting, or if you restore the DTV The main menu consists of the function setting items below. channel you deleted, you will need to perform auto channel scan. Before you begin: Make sure if th
Resumen del contenido incluido en la página 15
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Language Selection Note: You can choose English, Spanish, or French as your on-screen language. • After setting “Auto Channel Scan”, using [CH K / L] on the remote control skips unavailable programs automatically. • If you connect the cable system directly, contact the CATV installer. • If you press [POWER] or [SETUP] during auto channel Press [SETUP] to display the main menu. 1 scan, the settin
Resumen del contenido incluido en la página 16
ATCHING TV W Channel Selection Volume Adjustment K Select channels by pressing [CH / L] or [the Number buttons]. This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. K X Y • To select the memorized channels, use [CH / L] or Use [VOL. / ] to adjust the audio volume. [the Number buttons]. • To select the non-memorized channels, use Volume 20 [the Number buttons]. To Use [the Number buttons] • The volume bar will b
Resumen del contenido incluido en la página 17
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Still Mode Switching Audio Mode You can pause the image shown on the TV screen. This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode. TV Press [STILL] to pause the image shown on the TV Press [AUDIO] to display the currently selected screen. 1 audio mode. While receiving an MTS broadcast, press repeatedly to cycle through
Resumen del contenido incluido en la página 18
ATCHING TV W Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. DTV TV In the digital mode, the detailed broadcasting information for the current In the analog mode, the current channel number and the audio mode are channel such as program title, program guides are displayed. displayed. Press [INFO] to display the details of the currently Press [INFO]. selected program. 6 SAP / STEREO 480i 480i SD SD 4:3 4:3
Resumen del contenido incluido en la página 19
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION TV Screen Display Mode 4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. And 3 types of display modes can be selected for PC input signal. Press [SCREEN MODE ] repeatedly to switch the TV For 16:9 video signal aspect ratio. Full Zoom (normal) For 4:3 video signal Full Sidebar (normal) Expand Cinema Full Display a 16:9 picture at its o
Resumen del contenido incluido en la página 20
PTIONAL SETTING O Channel List Manual Register The channel list function lets you remove undesired channels from the The manual register function lets you add the channels that were not added channel registration list. by the auto channel scan due to the reception condition at the initial setting. Press [SETUP] to display the main menu. Press [SETUP] to display the main menu. 1 1 Use [Cursor K/ L] to select “CHANNEL”, then press Use [Cursor K/ L] to select “CHANNEL”, then press 2 2 [
