Manual de instrucciones de Edelbrock Torker II 5081

Resumen del contenido incluido en la página 1

TORKER II INTAKE MANIFOLD
For Ford 351 C.I.D. Windsor V8 Engines
Catalog #5081
INSTALLATION INSTRUCTIONS
PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and
procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this
installation, it is recommended to have the installation completed by a mechanic. If you have any questions, please

Resumen del contenido incluido en la página 2

• PREP AND TUNING FOR POWER: 1. Generally speaking, the stock jetting for a Performer or Thunder Series carburetor will not need changing. Specific applications may show an increase in power by tuning the fuel mixture. 2. Aftermarket distributor curve kits may be used with Torker II intake manifolds. A basic ignition curve of 12° to 14° initial, and a total of 36° to 38° advance is a good starting point. 3. Use modified or high performance cylinder heads such as our Performer or Performer RPM.