Manual de instrucciones de Edelbrock 68783

Resumen del contenido incluido en la página 1

TUBULAR EXHAUST SYSTEM
For 1983-1988 Monte Carlo LG-4 Low Output 5.0L V8
Catalog #68782, #68783
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Tubular Exhaust System (TES). If you have any
questions, please contact our Technical Hotline at : 1-800-416-8628 from 7 am - 5pm, Monday-Friday, Pacific
Standard Time or e-mail us at Edelbrock@Edelbrock.com. Please fill out and mail your warranty card.
TUBULAR EXHAUST SYSTEM: These components are designed a

Resumen del contenido incluido en la página 2

INSTALLATION INSTRUCTIONS DISASSEMBLY DISASSEMBLY - RIGHT SIDE 1. Disconnect negative cable from battery. 1. Disconnect A.I.R. injection tube from exhaust 2. Raise vehicle and support with jackstands. manifold and catalytic converter tube. 3. Use penetrating oil on all nuts and bolts to be 2. Disconnect electrical connector and vacuum hoses removed. This will prevent the possibility of broken from A.I.R. diverter valve assembly (note position of or stripped nuts and bolts. hose and electrical co

Resumen del contenido incluido en la página 3

ASSEMBLY - RIGHT SIDE CROSSOVER PIPE ASSEMBLY 1. Install T.E.S. flange gasket and one 3/8"-16 x 1" 1. Assemble both lower pipes. Do not clamp tight at bolt, lock washer and flat washer at rearmost bolt this point. hole (leave bolt loose enough to accept T.E.S.). 2. Rotate E.F.E. valve 180-degree from its original 2. Install right side T.E.S. manifold and dipstick tube position (the diaphragm will now be facing to the from top side. rear of the vehicle). 3. Install remaining bolts, lock washers,