Manual de instrucciones de Edelbrock 3766

Resumen del contenido incluido en la página 1

Performer and Performer RPM Intake Manifolds
For 429-460 C.I.D. Ford Engines
Catalog #2166, #3766, #7166, #7566
INSTALLATION INSTRUCTIONS
PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common
tools and procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable
performing this installation, it is recommended to have the installation completed by a mechanic.

Resumen del contenido incluido en la página 2

Manifold 2166 (Non-Emissions): CARBURETOR REFERENCE PARTS REQUIRED FOR INSTALLATION Performer #1405 (600 cfm) A, I, K, N, O #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter Performer #1406 (600 cfm) A, I, K, N #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter Thunder Series #1805 (650 cfm) A, I, K, N #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter Thunder Series #1806 (650 cfm) A, I, K, N #1495 or 1848 throttle plate kit, #1483 or

Resumen del contenido incluido en la página 3

• PREP AND TUNING FOR POWER: NOTE: Local emission laws must be checked for legality of any carburetor or ignition changes. Performer Series Intake Manifolds 1. The long equal length runners in the Performer manifold create a very strong signal to the carburetor. In some applications, the stock rods or jets may need changing for best overall performance. Refer to your carburetor owner's manual for details. 2) Performer manifolds deliver excellent drivability and power utilizing stock distributo

Resumen del contenido incluido en la página 4

INSTALLATION INSTRUCTIONS 1) Use only recommended intake gaskets set when installing 4) Do not use cork or rubber end seals. Use RTV silicone sealer instead. Apply a ¼" high bead across each block this intake manifold. For ease of installation, we recommend Edelbrock Intake Manifold Bolt & Washer Kit end seal surface, overlapping the intake gasket at the four corners. This method will eliminate end seal slippage. #8569. 5) Install the intake manifold and hold-down bolts. Torque all 2) Fully