Manual de instrucciones de Edelbrock 305

Resumen del contenido incluido en la página 1

PERFORMER-PLUS CAMSHAFT / LIFTERS / LUBE KIT
CATALOG # 3702
MODEL: 305 c.i.d. 1987-1995 5.7L TBI Chevrolet V8
LG-4 engines (1981-1987)
GENERAL INSTRUCTIONS
• Please study these instructions carefully before you remove your stock camshaft. If you have any questions or problems, do not hesitate to con-
tact our Technical Hotline at: 1-800-416-8628.
� These instructions are designed to give general installation guidelines. A complete step-by-step procedure manual would require many pages. If
you a

Resumen del contenido incluido en la página 2

12. Remove hydraulic valve lifters. � VALVE ADJUSTMENT 13. Remove crankshaft pulley, and using a suitable puller, crankshaft 1. Turn the engine over until the No. 1 cylinder exhaust lifter starts to dampener. move up. At this point install adjusting nut on intake rocker arm and 14. Loosen oil pan and remove water pump and front cover. adjust to zero clearance between rocker arm and valve. From this NOTE: The front cover oil seal should be replaced before the front point turn adjusting nut down (

Resumen del contenido incluido en la página 3

any signs of wear. If worn, be sure to replace with a new gear or you may wear out your camshaft prematurely. High-volume oil pumps are not recommended with Performer-Plus camshafts. Edelbrock camshafts are designed to use O.E.M. type gears only. � CAM GEARS AND CAMSHAFT END PLAY— If cam gear becomes loose, the cam will slide back in the block, causing the lifters to hit the lobes next to them and also the cam bearing journals. If the engine is run after this happens, the bottom of the lifters a

Resumen del contenido incluido en la página 4

CAMSHAFT: Performer-Plus CAMSHAFT: Performer-Plus CATALOG: #3702 CATALOG: #3702 ENGINE: 305 c.i.d. Chevrolet V8 LG-4, 1981-1987 ENGINE: 305 c.i.d. Chevrolet V8 LG-4, 1981-1987 RPM RANGE: 1500-5500 RPM RANGE: 1500-5500 CAUTION: CAUTION: Use only Sure Seat Valve Springs, #5802 or 5902 Use only Sure Seat Valve Springs, #5802 or 5902 Use stock ratio rocker arms only Use stock ratio rocker arms only Duration at 0.006" Lift: Intake 244° Exhaust 264° Duration at 0.006" Lift: Intake 244° Exhaust 264° Du