Manual de instrucciones de Edelbrock 2803

Resumen del contenido incluido en la página 1

BIG VICTOR (SPREAD-PORT) INTAKE MANIFOLDS
® For Standard and Tall Deck Big Block Chevrolet
V8s Using Spread-Port Style Cylinder Heads
Catalog #s 2801, 2802, 2803, 2804, 2805, 2806
INSTALLATION INSTRUCTIONS
PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and
procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this installation,
it i

Resumen del contenido incluido en la página 2

� INTAKE GASKETS: Manifold runners as cast, will fit well with Fel-Pro #1298 intake gaskets. The gasket match to the ports and bolt holes may vary, and should be adjusted for best fit to the ports. � END SEAL CLEARANCE: Due to varying deck heights and/or valley widths, either from decking the block or milling the cylinder heads, the end seal clearance should be checked. Lay the manifold on the engine with gaskets in place, and measure the clearance. There should be a minimum of .060” between the