Resumen del contenido incluido en la página 1
LC-60LE831U OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN
LC-60LE831U
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA
DE CRISTAL LÍQUIDO
OPERATION MANUAL
MODE D'EMPLOI
MANUAL DE OPERACIÓN
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
SHARP CORPORATION
Printed in Mexico
Imprimé au Mexique
Impreso en México
TINS-F098WJZZ
11P02-MX-NM
IMPORTANT : Please read this operation manual before starting operating the equipment.
IMPORTANT : Veuillez lire ce
Resumen del contenido incluido en la página 2
LC-60LE831U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: Model No.: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The Serial No.: numbers are located at the rear of the TV. IMPORTANT INFORMATION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO WARNING: NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol, within an equilateral triangle, CAUTION is intended to alert the use
Resumen del contenido incluido en la página 3
IMPORTANT INFORMATION CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. DECLARATION OF CONFORMITY: SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-60LE831U This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This d
Resumen del contenido incluido en la página 4
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safet
Resumen del contenido incluido en la página 5
IMPORTANT SAFETY INSTRUCTIONS EXAMPLE OF ANTENNA GROUNDING AS PER • Outdoor Antenna Grounding — If an outside antenna is NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against ANTENNA voltage surges and built-up static charges. LEAD IN WIRE Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the GROUND mast and supporting str
Resumen del contenido incluido en la página 6
IMPORTANT SAFETY INSTRUCTIONS Caring for the front panel � Turn off the main power and unplug the AC cord from the wall outlet before handling. � Gently wipe the surface of the front panel with a soft cloth (cotton, fl annel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front panel. � Wiping with a hard cloth or using strong force may scratch the surface of the front panel.
Resumen del contenido incluido en la página 7
Contents IMPORTANT INFORMATION ..................... 1 Enjoying Photo/Music/Video Playback DEAR SHARP CUSTOMER ....................... 3 Connecting a USB Memory Device/ IMPORTANT SAFETY INSTRUCTIONS ........ 3-5 USB Hard Drive .............................. 40 Connecting a Home Network (DLNA) Server . . . 40 Supplied Accessories ............................ 7 Select the Files to Play Back ................... 41 Playing Back Files QUICK REFERENCE on a USB Memory Device ................. 42-46 At
Resumen del contenido incluido en la página 8
Supplied Accessories Make sure the following accessories are provided with the product. Remote control unit “AAA” size battery Cable tie Stand unit Operation manual (g1) (g2) (g1) (g1) (g1) Page 8 Page 9 Page 8 Page 7 ■ Connection guide (g1) • Always use the AC cord supplied with the TV. • The illustrations above are for explanation purposes and may vary slightly from the actual accessories. QUICK REFERENCE Attaching the Stand • Before attaching (or detaching) the stand, unplug the AC cord. •
Resumen del contenido incluido en la página 9
QUICK REFERENCE QUICK INSTALLATION TIPS Using the Remote Control Unit Use the remote control unit by pointing it towards the Attach your antenna to the back of the television. 1 remote control sensor on the TV. Objects between the (See page 9.) remote control unit and the remote control sensor may Connect the AC plug for the television into the AC 2 prevent proper operation. outlet. 2 1 1 AC outlet AC outlet � Place the TV close to the AC outlet, and keep the power plug within reach. �
Resumen del contenido incluido en la página 10
Preparation Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. For connecting the antenna cable to the TV, use commercially available cables. Connecting Antenna Cable � Connect the antenna cable to the TV using one of the methods in the illustratio
Resumen del contenido incluido en la página 11
Part Names TV (Front) Center Icon illumination (See page 32.) OPC sensor *1 Remote control sensor VOLl/k CH / INPUT MENU POWER *2 *1 OPC: Optical Picture Control (See page 26.) *2 See pages 17 and 24 for using the touch sensor panel. TV (Rear) *1 RS-232C terminal PC IN terminal VIDEO 2 terminals VIDEO 1 terminals COMPONENT terminals *1 AUDIO OUT terminal *1 USB 1 terminal HDMI 1 terminal ARC: Audio Return Channel (See pages 51 and 52.) HDMI 2 terminal Antenna/ USB 2 Cable in terminal HDMI
Resumen del contenido incluido en la página 12
Part Names 1 POWER: Switch the TV power on or enter standby. (See Remote Control Unit page 17.) 2 TV, STB, DVD•VCR, AUDIO: Switches the remote 1 control for TV, STB, DVD, BD, VCR and AUDIO operation. (See pages 49 to 50 for details.) * To enter the code registration mode, you need to press 18 an appropriate button (STB, DVD•VCR or AUDIO) and DISPLAY at the same time. 19 3 External equipment operational buttons: Operate the 2 external equipment. 4 OPTION: Display the Link Operation Menu sc
Resumen del contenido incluido en la página 13
Introduction to Connections Experiencing HD Images An HDTV without an HD source is just an ordinary TV. To enjoy HD images on the TV, you should get HD programming from the following: � Over-the-air broadcasting via HD quality antenna � HD cable/satellite subscription � HD compatible external equipment � For information on updating to HD programming, ask your cable/satellite service provider. Types of Connection Image quality differs depending on the terminal used. To enjoy clearer images, check
Resumen del contenido incluido en la página 14
Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 12 and 21.) For connecting the TV to external equipment, use commercially available cables. CAUTION � To protect equipment, always turn off the TV before connecting any external equipment. � Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making c
Resumen del contenido incluido en la página 15
Connecting to External Equipment ■ When using Component cable (COMPONENT): � Blu-ray disc player � DVD player � HD cable/satellite set-top box Back panel surface inputs AUDIO-L (White) AUDIO-R (Red) Audio cable PR (Red) Y (Green) PB (Blue) Component video cable COMPONENT OUT � To enjoy 1080p display capability, connect your external equipment using an HDMI-certifi ed cable or a component cable and set the equipment to 1080p output. � See page 13 for connecting a Blu-ray disc player, DVD player
Resumen del contenido incluido en la página 16
Connecting to External Equipment Connecting an Audio Amplifi er ■ When using optical fi ber cable: It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 31 for details.) PCM audio outputs from the terminal. Optical fiber cable OPTICAL DIGITAL AUDIO INPUT Back panel horizontal inputs � Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI connection. In this case, set the audio formats of the connected equipment to
Resumen del contenido incluido en la página 17
Connecting to External Equipment Connecting a PC Refer to page 56 for a list of PC signals compatible with the TV. ■ When using HDMI cable (HDMI 1, 2, 3 or 4): Back panel vertical inputs HDMI-certified cable HDMI OUT � Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certifi ed cable to the HDMI 1 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". (See page 56.) � The HDMI
Resumen del contenido incluido en la página 18
Watching TV Turning On/Off the Power Initial Installation When you turn on the TV for the fi rst time, it will automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press POWER on the remote control unit. 1. Insert the batteries into the remote control unit. (See page 9.) 2. Connect the antenna cable to the TV. (See page 9.) 3. Plug in the AC cord to the AC outlet. (See page 8.) POWER POWER (On/Standby) Language (Langua
Resumen del contenido incluido en la página 19
Watching TV Antenna & Cable/STB CH Search (Channel search) Channel auto search makes the TV look for all Select the type of connection you will use to channels viewable in the set area. watch TV. When "Air" is selected in Antenna setting: / 5 Press c d to select "Antenna & Cable" or "Set- 3 / Press c d to select "Start", and then press top box", and then press ENTER. ENTER. Antenna & Cable Set-top box Start Cancel To watch TV via an antenna or cable When "Cable" is selected in Antenna s
Resumen del contenido incluido en la página 20
Watching TV Completed The settings confi rmation screen is displayed. 6 Confi rm the information displayed on the screen, and then press ENTER. Examples of the settings confi rmation screen When one or more channel is received after "Antenna & Cable" was selected in step 3 and a search was carried out. Language : English TV Location : Home Anntena & Cable/STB : Antenna & Cable Air/Cable : Air Search Result : Digital 4ch Analog 7ch Press the INPUT button, then the right arrow d, to see the
