Resumen del contenido incluido en la página 1
Dear Sceptre Customer,
Congratulations on your new SCEPTRE E236BV-FHD LED HDTV purchase.
Thank you for your support. To ensure safety and many years of trouble free
operation of your TV, please read the manual carefully before making any
adjustments, and keep them in a safe place for future references. We hope
you enjoy your new SCEPTRE HDTV.
For technical assistance, please call 1800-788-2878 and select option 3 or
email our tech support group at monitor-ts
Resumen del contenido incluido en la página 2
IMPORTANT INFORMATION - 2 - www.SCEPTRE.com SCEPTRE E246BV-FHD HDTV User Manual
Resumen del contenido incluido en la página 3
SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and / or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning t
Resumen del contenido incluido en la página 4
SAFETY INSTRUCTIONS This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference. • To avoi
Resumen del contenido incluido en la página 5
• Do not overload power strips and internal components may function extension cords. Overloading can abnormally. Unplug the power cord result in fire or electric shock. immediately and contact your dealer • The wall socket should be installed for repair. Continued use of the near the equipment and should be product may cause fire or electric easily accessible. shock. • Only the marked power source can be • Do not install the product in an area used for the product. Any power with heavy du
Resumen del contenido incluido en la página 6
IMPORTANT INFORMATION Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in
Resumen del contenido incluido en la página 7
Opening the Package The SCEPTRE TV is packaged in a carton. Any standard accessories are packed separately in another carton. The weight of the TV is approximately 9.92 lbs. Due to the size and weight of the product, it is suggested that it must be handled by a minimum of 2 or more persons. Since the glass can be easily scratched or broken, please handle the product gently. Never place the unit on a surface with the glass facing downwards unless it is on protective padding. When o
Resumen del contenido incluido en la página 8
Attaching or Removing the Stand 1. To attach the base, align the base and the TV. Place the TV's neck on the base shown below. 2. Rotate the TV as the picture has shown until you hear a clicking sound from the base. Afterwards, the TV will be ready for use. 3. To remove the stand, remove the screws in the circled area and the neck will come off. - 8 - www.SCEPTRE.com SCEPTRE E246BV-FHD HDTV User Manual
Resumen del contenido incluido en la página 9
Table of Contents IMPORTANT INFORMATION .......................................................................................................... 2 SAFETY INSTRUCTIONS ................................................................................................................ 3 SAFETY INSTRUCTIONS ................................................................................................................ 4 IMPORTANT INFORMATION ...............................................
Resumen del contenido incluido en la página 10
Identifying Front and Rear Panel Front View INDICATOR LIGHT – The light is red when power is plugged in but the TV is not turned on. The light turns blue when the TV is turned on. Because of the LED in the panel, the TV might take 10 – 12 seconds to power on. REMOTE SENSOR – The remote sensor receives all the commands from the remote control. Rear View Mounting Pattern Mounting Specification : 100mm x 100mm using screw size M4
Resumen del contenido incluido en la página 11
Top side Control Buttons 1. POWER – Turn on the TV by pressing the button once. Press the button again to turn off the TV. 2. SOURCE – This button switches between all the different sources of the TV. When the OSD is active, this button acts as the enter button and confirms the menu selection. 3. MENU – This button activates the On Screen Display (OSD). If a sub-menu is active, pressing this button will exit the OSD. 4. CH( ▲) – This button
Resumen del contenido incluido en la página 12
• Rear View Connections 1. DC – This connection connects to an AC adapter for powering the TV. 2. USB – USB connects to USB flash drives for playing music and picture. The USB port is also used for updating the TV’s firmware. 3. HDMI1 – HDMI connects to devices that use HDMI cable, such as Blu-ray or HD DVD player, or HD cable / satellite set-top box. This connection port receives pure digital audio and high definition signal thro
Resumen del contenido incluido en la página 13
10. Video – Video connects to devices that use composite video cables such as VCR or DVD player or Wii™. Connect the yellow for video and the red / white for audio. Please Note: audio is shared with YPbPr port. 11. LR – These two connections are audio connection for either YPbPr or Video port. 12. TV – This connection is for digital or analog cable without the cable box or over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both analog and digital channels. This con
Resumen del contenido incluido en la página 14
SCEPTRE TV Remote Control - 14 - www.SCEPTRE.com SCEPTRE E246BV-FHD HDTV User Manual
Resumen del contenido incluido en la página 15
For universal remotes, this TV follows SONY’s universal remote code. You need to find the actual code from your cable or satellite or universal remote provider. 1. POWER - Turns the TV on or off. 2. SOURCE - Press this button to cycle through the INPUT source. 3. PICTURE - Selects various preset picture settings. 4. CC - Cycles between different closed captioning modes. 5. SLEEP – Turns the TV off in a specific set of time dependent on your selection. 6. MUTE – Turns the sound off fr
Resumen del contenido incluido en la página 16
Connection Suggestions If You Have Digital Cable without Cable Box or Antenna… 1. Make sure the power of HDTV is turned off. 2. Connect the Coaxial RF cable from your antenna or digital cable to the TV port on the back of your HDTV. 3. Turn on the HDTV. 4. Follow the first time on screen instructions. Please Note : • Not all broadcasts are in High Definition (HD). Please refer to your local broadcasting stations for more information. • The
Resumen del contenido incluido en la página 17
Connecting DVD Player with Component YPbPr… 1. Make sure the power of HDTV and your DVD player is turned off. 2. Obtain a Component Cable. Connect the green color connector to both your DVD player and YPbPr’s green connector port on the back of your HDTV. 3. Connect the blue color connector to both your DVD player and YPbPr’s blue connector port on the back of your HDTV. 4. Connect the red color connector to both your DVD player and YPbPr’s re
Resumen del contenido incluido en la página 18
Connecting Wii™ with Composite… 1. Make sure the power of HDTV and your Wii™ is turned off. 2. Obtain a Yellow Video Cable. Connect the Yellow Video connector to both your Wii™ and AV’s Yellow Video connector port on the back side of your HDTV. 3. Obtain a RCA Audio Cable. Connect the white color connector to both your Wii™ and AV’s white connector port on the back side of your HDTV. 4. Connect the red color connector to both your Wii™ and AV’s
Resumen del contenido incluido en la página 19
Connecting Cable or Satellite boxes with HDMI… 1. Make sure the power of HDTV and your set-top box is turned off. 2. Connect a HDMI cable to the HDMI output of your set-top box and the other end to the HDMI port on the back of your HDTV. 3. Turn on the HDTV and your set-top box. 4. Use the remote control’s source button or the source button on the TV to switch to HDMI. Please Note : • Please reference the set-top box’s manual, to make sure t
Resumen del contenido incluido en la página 20
Connecting to a PC with VGA and 3.5 mm minijack … 1. Make sure the power of HDTV and your PC is turned off. 2. Obtain a 15-pin D-Sub VGA cable; connect to the VGA output of your PC and the other end to the VGA port on the back of your HDTV. 3. Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and the other end to the VGA Stereo Input port. 4. Turn on the power of the HDTV and your PC. 5. Use the remote control’s source button or t
