Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A CAUTION RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. RISK OF ELECTRIC SHOCK DO NOT OPEN! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SER- MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS VICE PERSONNEL. UNIT. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOC
Resumen del contenido incluido en la página 3
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee t
Resumen del contenido incluido en la página 4
SPECIFICATIONS CONTENTS Power Requirement: Source: AC 120V, 60Hz IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . 2 FCC INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 AC Power Consumption: 122 watts TRADEMARKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 PC RESOLUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Weight: 21.8 lbs DISPOSAL PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 5
POSITIONING THE LCD GETTING STARTED BATTERY INSTALLATION HDTV Always use a firm and flat surface when Install two (2) “AAA” batteries in the remote • control. (Not included) positioning your HDTV. Do not position the unit in a confined area. To ensure safe operation, please observe the • following precautions: Allow adequate space for proper ventilation. • • Replace both batteries at the same time. Do not use a new battery with a used battery. STAND REMOVAL AND WALL • There’s a risk of explos
Resumen del contenido incluido en la página 6
GETTING STARTED HDTV BACK PANEL HDTV INPUT/OUTPUT REFERENCE Digital Audio Output (Coaxial) 1 1 5 Component AV Input (VIDEO2 or VIDEO3) 2 Green (Y), blue (Pb), and red (Pr) Video inputs plus the white and red Audio inputs. 6 NOTE: A composite connection is possible via VIDEO INPUT2 using the Y (VIDEO) jack and the L/R audio jacks. (See 2 Video 2 Setting on page 11.) PC Input and Stereo Audio (Mini) 3 7 • MONITOR RGB (D-SUB) • AUDIO R/L (Stereo Mini Jack) 4 Analog / Digital Antenna Input 5 S-Video
Resumen del contenido incluido en la página 7
GETTING STARTED AUDIO / VIDEO CONNECTIONS COMPOSITE connections are used to hookup Digital Audio Output is used to hookup a your analog equipment such as a VCR or an multichannel receiver with the use of a phono- older DVD player. type digital audio cable. NOTE: Always match the color of your device’s output COMPONENT connections will accept SDTV, jack, the connector and the HDTV’s input jack. EDTV and HDTV video signals. Use them for S-Video connection can replace the yellow great image qualit
Resumen del contenido incluido en la página 8
GETTING STARTED (CONTINUED) INITIAL CHANNEL SEARCH Before proceeding, please make sure to hook up your antenna or cable connection and all AV equipment correctly to your HDTV. PLUG IN AC POWER CORD 120V AC, 60Hz INITIAL ENERGY SAVING MODE SCREEN TURN ON TV (PRESS POWER BUTTON) Wait for on-screen instructions to set an Initial Energy Saving Mode, and perform an Initial Channel/Signal Search. TV SET LOCATION SELECTION: Select “Home Mode” by pressing the CH key to set the HDTV’s backlight to an En
Resumen del contenido incluido en la página 9
REMOTE CONTROL OPERATION • POWER Key—Turns your HDTV On or Off. • PIX SHAPE Key—Cycles through the available aspect ratios. The different settings either • INPUT Key—Selects the video source to view. stretch, zoom, or fill the image on your screen. Holding down the key displays the Input List. Bars may appear on top and bottom of your screen (or on left and right sides) depending on • ECO Key—Modifies the Energy Saver level (see the broadcasted signal or program. page 11.) NOTE: Pix6-7 are setup
Resumen del contenido incluido en la página 10
ON-SCREEN MENU OPERATION CHANNEL SETTING ___________ Display the On Screen menu and use the CURSOR keys to select Channel Setting. Press ENTER. Channel Search Auto – Searches the detected mode, Cable or Air. Cable – Searches for analog and unscrambled (ClearQAM) digital cable channels. Air (Antenna) – Searches for analog and digital off-air MAIN MENU SCREEN channels. Digital Add-On – Searches digital off-air channels adding newly found digital channels to the channel map database. NOTE: Digit
Resumen del contenido incluido en la página 11
ON-SCREEN MENU OPERATION Video2 Setting Use this feature to establish either a Component or Composite connection to the VIDEO INPUT 2 jacks on your HDTV. Use the CURSOR keys to select the type of connec- tion you’ll use in VIDEO INPUT 2. Press ENTER, a blue mark will appear next to the selected option. VIDEO2 SETTING SCREEN SETUP ________________________ Display the On Screen menu and use the CURSOR keys to select Setup. Press ENTER. Menu Language Choose between English, Spanish and Fren
Resumen del contenido incluido en la página 12
ON-SCREEN MENU OPERATION SETUP _________________________ Clock Timer This feature allows you to set a Current Time for your HDTV and enable a Switch On Time for the HDTV to turn on at a specific time of day. When On Timer Function is set to ON, the TV will automatically turn on at the previously set Switch on Time. CLOCK TIMER SCREEN Light Sensor This feature detects ambient room light brightness and uses that reading to control the panel brightness level and picture parameters to reduce the HD
Resumen del contenido incluido en la página 13
ON-SCREEN MENU OPERATION SETUP ________________________ V – Chip (Parental Control) Use this feature to automatically block programs with content you deem as inappropriate for viewing by your children. NOTE: This feature is designed to comply with the United States of America’s FCC V-Chip regulations. Therefore, it may not function with broadcasts that originate in other countries. V-CHIP SETUP SCREEN ADJUSTING THE V-CHIP RATINGS Select ON and press ENTER. Select Adjust (Standard) and press ENTE
Resumen del contenido incluido en la página 14
ON-SCREEN MENU OPERATION PICTURE ____________________ Display the On Screen menu and use the CURSOR keys to select Picture. Press ENTER. You may choose between Vivid, Mild, , and Standard, which have predetermined fixed picture parameter values, or choose the Manual option for customized personal settings. NOTE: Each AV input can have its own picture mode (pre- MAIN MENU SCREEN determined or manual.) Current input’s selected option is indicated by a blue marker. MANUAL PICTURE SETTINGS Manual
Resumen del contenido incluido en la página 15
ON-SCREEN MENU OPERATION SOUND _____________________ Display the On Screen menu and use the CURSOR keys to select Sound. Press ENTER. Choose an option for your sound settings: Auto – Sound settings are linked to the current Picture option and parameters are adjusted accordingly. Dynamic, Mild, Standard – 3 different predetermined sound parameters not linked with any Picture option. MAIN MENU SCREEN MANUAL SOUND SETTINGS The Manual option provides different parameters that can be personally ad
Resumen del contenido incluido en la página 16
PC INPUT Use your HDTV as a computer monitor by hooking PC Setting up your PC or Laptop to the TV with the use of an Auto Adjustment – Automatically adjusts display appropriate monitor cable (not included.) position, dot clock and phase. Before connecting any cables, disconnect the Dot Clock – Adjust the Dot frequency to match AC power cords of both the HDTV and PC from your computer’s Dot frequency. the AC outlets. Phase – Adjust this parameter when the picture Power on the HDTV and any other p
Resumen del contenido incluido en la página 17
USB INPUT PHOTO VIEWER _____________ View pictures on your HDTV with the use of a USB mass storage device (not included.) USB FLASH DRIVE THUMBNAIL VIEW SCREEN HDTV BACK PANEL NOTE:A thumbnail hide icon will appear if a picture cannot be decoded or if no NOTE: The HDTV switches to USB Input when a USB flash thumbnail data is available. drive is detected. USING THE PHOTO VIEWER Press ENTER on a thumbnail photo to enable the Rotate, Full View and Start Slideshow functions. Once in Full View mode
Resumen del contenido incluido en la página 18
ONE-YEAR LIMITED PARTS AND LABOR WARRANTY THIS LIMITED PARTS AND LABOR WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PURCHASED AND USED IN THE UNITED STATES OF AMERICA, CANADA, AND PUERTO RICO, EXCLUDING ALL OTHER U.S. TERRITORIES AND PROTECTORATES. THIS LIMITED WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER, AND DOES NOT APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES. WARRANTY APPLICATION FOR ONE YEAR from the date of original retail purchase Sanyo Manufacturing Corporation
Resumen del contenido incluido en la página 19
ESTE SÍMBOLO INDICA QUÉ VOLTAJES PELIGROSOS QUE CONSTI- PRECAUCIÓN TUYEN UN RIESGO DE CHOQUE ELÉCTRICO ESTÁN PRESENTES DEN- TRO DE ESTA UNIDAD. RIESGO DE CHOQUE ELÉCTRICO ¡NO ABRIR! ESTE SÍMBOLO INDICA QUE HAY INSTRUCCIONES IMPORTANTES DE PRECAUCIÓN: PARA REDUCIR EL RIESGO DE CHOQUE ELÉCTRICO, NO QUITE LA CUBIERTA OPERACIÓN Y MANTENIMIENTO EN LA LITERATURA QUE SE ANEXA A (O LA TAPA TRASERA). NO HAY PARTES ADENTRO QUE LAS PUEDA REPARAR EL USUARIO. REFIÉRASE A PERSONAL CALIFICADO PARA REPARAR EL
Resumen del contenido incluido en la página 20
INFORMACIÓN FCC Este equipo ha sido probado y se encontró en acuerdo a los límites para un aparato digital Clase B, en acorde a la Parte 15 de las Reglas FCC. Estos límites están diseñados para proveer una protección razonable contra interferencia nociva en una instalación residencial. Este equipo genera, usa y puede irradiar energía de radio frecuencia y si no es instalado o usado de acuerdo a las instrucciones, puede llegar a causar interferencia nociva a radio comunicaciones. Sin embargo,
