Manual de instrucciones de Demco - Dethmers Manufacturing Company9517188

Resumen del contenido incluido en la página 1

10-05
TP20188,Rev.1
ASSEMBLY
OPERATION
Pontiac G6 GT
REPLACEMENT PARTS
READ complete manual CAREFULLY
BOLT TORQUE SPECIFICATIONS
BEFORE attempting operation.
STANDARD BOLTS: METRIC BOLTS:
Size Grade Torque
Size Torque
5/16" 5 20 ft/lbs.
8mm 22 ft/lbs.
Pin height: 13-1/4” Centers: 24”
3/8" 5 35 ft/lbs.
10mm 42 ft/lbs.
7/16" 5 56 ft/lbs.
12mm 70 ft/lbs.
1/2" 5 85 ft/lbs.
14mm 95 ft/lbs.
4
4
3
6
3
1
6
2
1
2
1
1
2
2
8
2
1
2
8 5
1
9
5
2
1
2
1
1
4
4
4
3
1 3
7
4
9517188 PARTS LIST
REF. PART
NO. NO.

Resumen del contenido incluido en la página 2

WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN LOSS OF TOWING VEHICLE CONTROL, SEPARATION OF THE TOW BAR FROM THE TOWING VEHICLE, SEPARATION OF THE TOWED VEHICLE FROM THE TOW BAR, CAUSING SEVERE PERSONAL INJURY, DEATH, OR PROPERTY DAMAGE. IMPORTANT INSTALLATION ITEMS CAUTION DEMCO products and accessories are intended to Safety is of utmost importance at all times. There are several items be installed by professional installers with experi- that must be checked each time before u

Resumen del contenido incluido en la página 3

3. Remove plastic filler panel from under facia by removing five screws and two plastic push fasteners. 7. Remove air intake on passenger side, by removing one bolt and two plastic push fasteners. 4. Remove one bolt on each side that connects facia to fender. 8. Remove plastic filler panel on each side by removing all plastic push fasteners, set panel aside for later notching and reinstallation. 5. Remove four plastic push fasteners and one screw from filler panel on each side. 6. If vehicle is

Resumen del contenido incluido en la página 4

10. With an assistant, slide base plate up onto frame and forward to bumper make sure horn bolt hole and air 12. Drill two 3/8” holes in bumper using base plate chain anchor box holes line up, then clamp. as a guide insert bolts and tighten (use shims if needed). Drivers side Passenger side 13. Notch plastic filler panel as shown in picture on each side and replace. 11. Drill bottom two 3/8” holes (on each side) insert bolts and tighten, drill top two 3/8” holes (on each side) place spacer bushi

Resumen del contenido incluido en la página 5

Ag ❍ RV ❍ Warranty Registration Rental ❍ Dethmers Manufacturing Company Brakes ❍ 4010 320th Street • Box 189 • Boyden, Iowa 51234 Marine ❍ Toll Free 800-54DEMCO (800-543-3626) • FAX 800-845-6420 www.demco-products.com Very Very Satisfied Dissatisfied Satisfied Dissatisfied How satisfied are you with our product? ❍❍ ❍ ❍ How satisfied are you with the dealership/distributor sales staff? ❍❍ ❍ ❍ Dealer/Distributor Name City State How satisfied are you with the company sales staff? ❍❍ ❍ ❍ How satisf

Resumen del contenido incluido en la página 6

Postage Dethmers Manufacturing Company 4010 320th Street, Box 189 Boyden, Iowa 51234

Resumen del contenido incluido en la página 7

DEMCO PRODUCTS ORIGINAL PURCHASERS LIMITED WARRANTY 1. Extent and Duration of this Warranty: Your Demco product has a Lifetime Limited warranty to be free from defects in materials and In addition, the warranty does not extend to repairs made workmanship under normal use and service from date of necessary by normal use of parts, accessories or other purchase by the original (first) retail owner, or until it is equipment which in the judgment of Warrantor, are either resold or transferred by the

Resumen del contenido incluido en la página 8

DETHMERS MFG. COMPANY 4010 320th St., P.O. BOX 189, BOYDEN, IA. 51234 PH: (712) 725-2311 FAX: (712) 725-2380 or 1-800-845-6420 TOLL FREE: 1-800-54DEMCO (1-800-543-3626) www.demco-products.com