Resumen del contenido incluido en la página 1
LED TV
Installation manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model Serial No.
[HG470570_HOTEL-ZA]ENG.indd 1 2012-04-17 �� 8:40:48
Resumen del contenido incluido en la página 2
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Introduction This TV has functionality that lets it interact with a set-back box (SBB/STB) and with other TVs in a computer controlled system for hotels and other hospitality businesses. Interactive : When the TV is powered-up initially, it sends a command to identify the connected SBB/STB. If it identifi
Resumen del contenido incluido en la página 3
ENGLISH Contents y Introduction .............................................................................................................................................................. 2 y Operational Modes ................................................................................................................................................... 2 y Still image warning ...................................................................................................................
Resumen del contenido incluido en la página 4
Accessories ✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎ The items’ color and shape may vary, depending on the model. ✎ The parts for the stand are listed under Stand Components on the following page. y Remote Control (AA59-00628A) & Batteries (AAA x 2) y Hotel Mount Kit y Owner’s Instructions y Power Cord y Safety Guide / Quick Setup Guide y Data Cable (Not available in all locations) (BN39-00865B, BN39-01011C : except
Resumen del contenido incluido en la página 5
Installing the LED TV Stand The 32” and larger LED TVs have swivel stands. You can set these stands so that the TVs swivel 20 degrees left and right. 60 degrees left and right, or 90 degrees left and right. See page 7. The 26” LED TVs do not have swivel stands. Components When installing the stand, use the provided components and parts. A 1 EA B 1 EA C x8 (M4 X L12) D x4 (M4 X L12, SECURITY) y Stand (depending on the model) y Guide Stand y Screws 1 2 C x4 Top View (M4 X L12) B Front A ATTENTI
Resumen del contenido incluido en la página 6
¦ Hotel Mount Kit Bolt + Nut Long Bolt (2EA) Short Bolt (2EA) Nut (2EA) Washer (2EA) Top Affixing the stand to a flat surface such as a Bottom dresser top, desk top, or entertainment center. ✎ Make sure to distinguish between the front and back of the Stand and Stand Guide when assembling them. ✎ Make sure that at least two people lift and move the TV. English 6 [HG470570_HOTEL-ZA]ENG.indd 6 2012-04-17 �� 8:40:56
Resumen del contenido incluido en la página 7
Assembling the swivel (32 inch TVs or larger) ¦ 60° swivel Leaving the BRACKET HOLDER SWIVEL unchanged lets the TV swivel 20° left and right. Rotating the BRACKET HOLDER SWIVEL 180°, and then assembling the stand as shown below lets the TV swivel 60° left and right. ¦ 90° swivel Removing the BRACKET HOLDER SWIVEL and assembling the stand as shown below without the BRACKET HOLDER SWIVEL lets the TV swivel 90° left and right. English 7 [HG470570_HOTEL-ZA]ENG.indd 7 2012-04-17 �� 8:40:58
Resumen del contenido incluido en la página 8
Using the TV's Controller ✎ The color and shape of the TV Controller may vary depending on the model. ✎ The TV's Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without the remote control. Function menu CONTENT Down (Front) Remote control sensor Left Right TV Controller Up (Rear) Power on Turn the TV on by pressing the Controller when the TV is in standby mode. Adjusting the volume Adjust the volume by moving the Controller from side to side
Resumen del contenido incluido en la página 9
The Connection Panel 9 [46" Model] 1 2 3 3 3 0 0 4 5 ! 6 7 8 ✎ Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off. ✎ When connecting an external device, match the color of the connection terminal to the cable. 1 COMPONENT IN / AV IN1 (46" Model: COMPONENT IN / AV IN) – Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on an A/V device. – Connects Component video / audio. – The COMPONEN
Resumen del contenido incluido en la página 10
4 DIGITAL AUDIO OUT (OPTICAL): Connects to a Digital Audio component. 5 PC / DVI AUDIO IN: Connect to the audio output jack on your PC. 6 PC IN: Connect to the video output jack on your PC. 7 AUDIO OUT: Connects to the audio input jacks on an Amplifier/Home Theater. 8 ANT IN – To view television channels correctly, the TV must receive a signal from one of the following sources: – An outdoor antenna / A cable television system / A satellite receiver 9 EX-LINK : Connect this jack to the jack on t
Resumen del contenido incluido en la página 11
The Remote Control ✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired customers. Display and select the available video Turns the TV on and off. sources. HDMI Selects the HDMI mode directly. Press to directly access channels. Press to select additional digital channels being broadcast by the same station. For example, to select channel ‘54-3’, press PRE-CH Return to the previous channel. ‘54’, then press '-' and ‘3’. Cut
Resumen del contenido incluido en la página 12
Connecting the TV to an SBB or STB TV Rear Panel ETH MODEM Data Cable 1. Connect the DATA jack of the TV to the ETH MODEM jack of the STB (SBB) with the Data cable. ✎ Data cables are polarized. Make sure you attach the end marked TV Side to the TV and the end marked STB Side to the STB. Also make sure you use the correct data cable for your vendor. English 12 [HG470570_HOTEL-ZA]ENG.indd 12 2012-04-17 �� 8:41:01
Resumen del contenido incluido en la página 13
¦ List of Vendors and Compatible Data Cables Supplied with the TV y Confirm you are using the correct data cable for your vendor. Refer to the code label on the data cables. Confirm the code on the Code Label Note the labeled end. Note the labeled end. Vendor Cable code Pin assign Remark OCC BN39-00865B Provided NXTV BN39-01011B nStreams BN39-01110A LodgeNet MTI MTI BN39-01011C Provided English 13 [HG470570_HOTEL-ZA]ENG.indd 13 2012-04-17 �� 8:41:02
Resumen del contenido incluido en la página 14
¦ Connecting the Audio Output to an Audio Amplifier TV Rear Panel Audio AUDIO IN Amplifier 1 Ster eo cable 1. Connect the AUDIO OUT port of the TV to the Audio In port of an audio amplifier with a stereo cable. B-LAN Model (HG478/HG578) y The TV is controlled by the external network. y Hotel Plug & Play is not supported in B-LAN models (HG478/578). English 14 [HG470570_HOTEL-ZA]ENG.indd 14 2012-04-17 �� 8:41:02
Resumen del contenido incluido en la página 15
RS/232 Connecting the RJP (Remote Jack Pack) Connect the input jacks on the TV to the RJP. The RJP lets guests connect audio and video sources to the TV. 4 2 V ideo / Audio Cable TV Rear Panel RJP Rear USB HDMI S-VIDEO RCA AUDIO/PC 3 HDMI cable 1 D-sub / PC Audio cable 1. Connect the PC IN / PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP. 2. Connect the AV IN [VIDEO]/[R-AUDIO-L] port of the TV to the RCA port of the RJP. 3. Connect the [HDMI] port of the TV and the HDMI port o
Resumen del contenido incluido en la página 16
y RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding outputs are connected from the RJP to the TV. The RJP communicates with the TV via RS232. A Hot Plug & Play function allows hotel guests to connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding Active/Inactive sources. A group of menu items, RJP Prio
Resumen del contenido incluido en la página 17
Setting the Hotel Option Data To let you control how the TV functions when in Hotel mode, the TV has two Hotel mode menus, the Stand-alone mode menu and the Interactive mode menu. The menu items that differ between the menus are listed below, Items in the Standalone menu only: – SIRCH Update Time – Manual SIRCH – SIRCH Channel – SIRCH Version Items in the Interactive menu only: – SI Vendor – Lodgenet Remote (If you selected MTI or EBL as your SI Vendor) All other items appear in both me
Resumen del contenido incluido en la página 18
¦ Menu Items To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTER buttons in order. To Exit from this menu : AC Power off, and then turn on again. Any changes you made are saved. Menu Item initial Value Description Select the Hospitality mode. Hospitality Hospitality Standalone y Standalone Mode Mode y Interactive Available in the Interactive menu only. Select the SI Vendor. SI Vendor SI Vendor Samsung y Samsung / OCC / MTI / Nstreams / NXTV / Enseo / Cardinal /Guestek / SeaChange / EBL Se
Resumen del contenido incluido en la página 19
Menu Item initial Value Description Picture Menu OFF Enable or disable the Picture Menu. Lock Menu OSD y On : Main Menu displays. Menu Display ON y Off : Main Menu does not display. Front panel (Local key) operation on/off. y Unlock : Unlock all panel keys Panel Button Operation Unlock y Lock : Lock all panel keys Lock y Power : Lock all panel buttons except Power y Menu/Source : Lock Menu and Source Select the way to update clock data. Clock Local Time Manual y Manual: Manual clock setting (
Resumen del contenido incluido en la página 20
Menu Item initial Value Description When USB is connected to the TV, y Default : Popup window appears. USB Media Defalut Mode y Automatic : Enters the USB contents menu automatically. y Disable : Neither the pop-up window or nor the menu appears.. Displays the External Source information when you change the TV source to External external input. Press the info key and the TV turns on. Source ON y On : The External Source information is displayed on the TV screen. External Banner y Off : The E
