Resumen del contenido incluido en la página 1
LFD DISPLAY
User Manual
ED65C ED75C
The color and the appearance may differ depending on the
product, and the specifications are subject to change without
prior notice to improve the performance.
Resumen del contenido incluido en la página 2
Table of contents Remote Control (RS232C) 27 Before Using the Product Using MDC Cable Connection 27 Copyright 5 Connection 30 Configuring Settings for Multi Control 49 Control Codes 31 Configuring settings for Multi Control 49 Safety Precautions 6 Symbols 6 MDC Program Installation/Uninstallation 50 Cleaning 6 Installation 50 Storage 7 Uninstallation 50 Connecting and Using a Source Electricity and Safety 7 What is MDC? 51 Device Installation 8 Connecting to MDC 51 Operation 10 Before Connectin
Resumen del contenido incluido en la página 3
Table of contents Picture Off 96 On Timer 104 Screen Adjustment Off Timer 105 Reset Picture 96 Picture Mode 85 Holiday Management 105 If the input source is PC, HDMI(PC) 85 Eco Solution 106 If the input source is HDMI(AV) 85 Energy Saving 106 Sound Adjustment Eco Sensor 106 Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R) 86 Auto Power Off 106 Sound Mode 97 Picture Size 87 Screen Burn Protection 107 Sound Effect 98 Picture Size 87 Pixel Shift 107 Position 88 Timer 108 Speaker
Resumen del contenido incluido en la página 4
Table of contents Safety Lock 115 Troubleshooting Guide Appendix Standby Control 116 Lamp Schedule 116 Requirements Before Contacting Samsung Contact SAMSUNG WORLD WIDE 136 Customer Service Center 125 OSD Display 117 Responsibility for the Pay Service (Cost to Testing the Product 125 Power On Adjustment 117 Customers) 145 Checking the Resolution and Frequency 125 Temperature Control 117 Not a product defect 145 Check the followings. 126 A Product damage caused by customer's fault 145 Anynet+ (H
Resumen del contenido incluido en la página 5
Chapter 01 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association. Ow
Resumen del contenido incluido en la página 6
Cleaning Safety Precautions ― Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ― Take the following steps when cleaning. Caution ― The following images are for reference only. Real-life situations may differ from what is shown in the images. RISK OF ELECTRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK) Power off the product and computer. 1 THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SER
Resumen del contenido incluido en la página 7
Connect the power plug to a grounded power socket (type 1 insulated Storage devices only). • An electric shock or injury may result. High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. ! ― Contact Customer Service Center if the inside of the product needs cleaning (service fee will be Do not bend or pull the power cord with force. Be careful not to leave the charged). power cord under a heavy object. • Damage to the cord may result in
Resumen del contenido incluido en la página 8
Caution Installation Do not disconnect the power cord while the product is being used. Warning • The product may become damaged by an electric shock. DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • A fire may result. Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • A fire or electric shock may result. Have a technician install the wall-mount hanger. ! • I
Resumen del contenido incluido en la página 9
Do not install the product on an unstable or vibrating surface (insecure shelf, Caution sloped surface, etc.) • The product may fall and become damaged and/or cause an injury. Do not drop the product while moving. • Using the product in an area with excess vibration may damage the • Product failure or personal injury may result. product or cause a fire. ! Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. Do not set down the product
Resumen del contenido incluido en la página 10
Do not leave heavy objects or items that children like (toys, sweets, etc.) on Operation top of the product. • The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury. Warning There is a high voltage inside the product. Never disassemble, repair or During a lightning or thunderstorm, power off the product and remove the modify the product yourself. power cable. • A fire or electric shock may result. • A fire or electric shock may r
Resumen del contenido incluido en la página 11
Do not use or keep combustible spray or an inflammable substance near Caution the product. • An explosion or fire may result. Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ! • Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time. Ensure the vents are not blocked by tablecloths or curtains. ! • An increased internal temperature may cause
Resumen del contenido incluido en la página 12
Rest your eyes for more than 5 minutes for every 1 hour of product use. Be careful that children do not place the battery in their mouths when removed from the remote control. Place the battery in a location that • Eye fatigue will be relieved. children or infants cannot reach. • If children have had the battery in their mouths, consult your doctor ! immediately. Do not touch the screen when the product has been turned on for an When replacing the battery, insert it with the right polarity (
Resumen del contenido incluido en la página 13
Chapter 02 Preparations Checking the Contents Removing the Packaging ― The following images are for reference only. Real-life situations may differ from what is shown in the images. Remove the black locking device at the bottom of the box. 1 1 2 3 Check the components and remove the styrofoam and plastic bag. 3 ― The appearance of actual components may differ from the image shown. Using the grooves in the box, lift and remove the top of the box. 2 Store the box in a dry area so that it ca
Resumen del contenido incluido en la página 14
Checking the Components Components - Contact the vendor where you purchased the product if any ― Components may differ in different locations. components are missing. - The appearance of the components and items sold separately may differ from the image shown. - A stand is not provided with the product. To install a stand, you can purchase one separately. Quick setup guide Warranty card D-SUB cable (P.41) Power cord (Not available in some locations) Remote Control (P.20) Batteries
Resumen del contenido incluido en la página 15
Parts Panel Key Power on the product. If you press the [ ] button when the product is turned on, the control menu will be displayed. To exit the OSD menu, press and hold the panel key for at least one second. Move to the upper or lower menu. You can also adjust the value of an option. Move to the left or right menu. the control You can adjust the volume by moving the panel key left or right when menu is not displayed. 15
Resumen del contenido incluido en la página 16
Port Description Reverse Side HDMI IN Connects to a source device using an HDMI cable. This port is used to upgrade the software. SERVICE (5V 0.5A) EXTERNAL IR / AMBIENT SENSOR IN Supplies power to the external sensor board or receives the light sensor signal. RGB IN Connects to a source device using a D-SUB cable. Connects to the audio of a source device. AUDIO OUT RGB / HDMI AUDIO IN Receives sound from a PC via an audio cable. Connects to MDC using an RS232C-stereo adapter. RS232C IN RS232C O
Resumen del contenido incluido en la página 17
Buttons Description External sensor KIT ― Aim the remote control towards this spot on the LCD Display. Remote Control The External sensor KIT has a remote-control sensor, a brightness sensor and ― function keys. If mounting the display onto a wall, you can move the External Sensor Keep the area between the remote sensor and remote control obstacle-free. sensor KIT to the side of the display. ― Automatically detects the intensity of ambient light around a selected display and The color and s
Resumen del contenido incluido en la página 18
Attaching the External sensor KIT to the sid ― This External sensor KIT can be attached to any part of the display using the double-sided tape provided with the sensor. ― The External sensor KIT can also be attached to a wall near the display. ― Do not attach the External sensor KIT to the display if the display does not have plastic or metal sides. The display can be damaged. 18
Resumen del contenido incluido en la página 19
Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: ― Stand: Sold separately Fix the cable of your anti-theft locking device to a heavy object such as a desk. 1 Put one end of the cable through the loop on the other end. 2 Insert the locking device into
Resumen del contenido incluido en la página 20
Remote Control ― Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. ― A button without a description in the image below is not supported on the product. Power on the product. OFF Power off the product. .QZ ABC DEF - 1 2 3 Remote control button functions may differ for different products. GHI JKL MNO Enter the password in the OSD menu. 4 5 6 PRS TUV WXY 7 8 9 DEL-/-- SYMBOL MUTE Mute the sound.
