Resumen del contenido incluido en la página 1
LED TV
Installation manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model Serial No.
[HG670677-ZA]Install Guide-ENG.indd 1 2013-02-25 �� 2:19:09
Resumen del contenido incluido en la página 2
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Introduction This TV B2B (Business to Business) model is designed for hotels or the other hospitality businesses, supports a variety of special functions, and lets you limit some user (guest) controls. Operational Modes This TV has two modes : Interactive and Stand-alone mode. • Interactive mode : In this
Resumen del contenido incluido en la página 3
Contents y Introduction .............................................................................................................................................................. 2 y Operational Modes ................................................................................................................................................... 2 y Still image warning ...........................................................................................................................
Resumen del contenido incluido en la página 4
Accessories ✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎ The items’ color and shape may vary, depending on the model. ✎ The parts for the stand are listed under Stand Components on the following page. List of Parts y Remote Control (AA59-00817A) & y Safety Guide / Quick Setup Guide y Power Cord Batteries (AAA x 2) (Not available in all locations) y Data Cable (depending on the model) y Hotel Mount Kit y Holder Ring (2EA)
Resumen del contenido incluido en la página 5
Installing the LED TV Stand The 32” and larger LED TVs have swivel stands. You can configure these stands so that the TVs swivel 20 degrees left and right, 60 degrees left and right, or 90 degrees left and right. See page 6. Components When installing the stand, use the provided components and parts. C D x7 (M4 X L12) B 1 EA A 1 EA or or x8 (M4 X L12, for 40" and above models) y Security Screws (3EA) y Stand (differs depending y Guide Stand y Screws (4EA, for 40" and above on the model) mod
Resumen del contenido incluido en la página 6
Assembling the swivel stand (32 inch TVs or larger) The 32” and larger LED TVs have swivel stands. You can configure these stands so that the TVs swivel 20 degrees left and right, 60 degrees left and right, or 90 degrees left and right using the BRACKET HOLDER SWIVEL. ¦ 20° swivel To configure the TV so that it swivels 20° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 20°. Then, fix the Bracket Holder Swivel to the stand
Resumen del contenido incluido en la página 7
¦ Hotel Mount Kit Bolt + Nut Short Bolt (2EA) Long Bolt (2EA) Nut (2EA) Washer (2EA) Top Affix the stand to a flat surface such as a dresser top, desk top, or entertainment center Bottom as shown. WARNING: To prevent injury, you must attach this TV securely to the floor, a table, a dresser top, etc. with the Hotel Mount Kit as described in these instructions. English 7 [HG670677-ZA]Install Guide-ENG.indd 7 2013-02-25 �� 2:19:16
Resumen del contenido incluido en la página 8
Using the TV's Controller The TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV without the remote control. Selecting the Media Play Selecting the Menu Selecting a Source Function menu TV Controller Return The image is drawn as if Remote control sensor you are facing the front side of the TV. Power off ✎ The product color and shape may vary depending on the model. ✎ To exit the menu, press the Controller for more than 1 second. ✎ When se
Resumen del contenido incluido en la página 9
VIDEO AUDIO VIDEO AUDIO The Connection Panel HDMI IN 2 HDMI IN 2 1 (DVI) 1 (DVI) USB USB (5V 0.5A) (5V 0.5A) 2 2 / CLONING / CLONING 9 8 1 9 8 1 HDMI IN 1 HDMI IN 1 1 1 [32/40/46" Models] [28" Model] DVI AUDIO IN DVI AUDIO IN HOSPITALITY TV HOSPITALITY TV HDMI IN HDMI IN 3 (ARC) 3 (ARC) EX-LINK EX-LINK AV IN AV IN AUDIO OUT AUDIO OUT 3 3 DATA DATA DIGITAL DIGITAL AUDIO OUT AUDIO OUT (OPTICAL) (OPTICAL) ANT IN AIR/CABLE ANT IN 4 AIR/CABLE 5 6 7 5 6 7 4 ✎ Whenever you connect an external device t
Resumen del contenido incluido en la página 10
4 ANT IN or AIR/CABLE – To view television channels correctly, the TV must receive a signal from one of the following sources: – An outdoor antenna / A cable television system / A satellite receiver. 5 AUDIO OUT: Connects to the audio input jacks on an Amplifier/Home Theater. 6 DIGITAL AUDIO OUT (OPTICAL): Connects to a Digital Audio component. 7 DATA – Used to support data communication between the TV and the external SBB or STB. – Connects using an RJ-12 type of plug. 8 DVI AUDIO IN: Connects
Resumen del contenido incluido en la página 11
Using the TV's Controller POWER Turns the TV on and off. Display and select the available video sources. Press to access channels directly. Press to select additional digital channels being broadcast by the same station. For example, to select channel ‘54-3’, press Return to the previous channel. ‘54’, then press '-' and ‘3’. Cut off the sound temporarily. Change channels. Adjust the volume. HOME: Display the REACH menu if REACH Display the channel list on the screen. has been downloaded t
Resumen del contenido incluido en la página 12
Connecting the TV to a SBB or STB of a SI vendor TV Rear Panel HDM HDMI IN I IN 3 3 (A (AR RC C) ) -LINK -LINK ETH MODEM IO IO OUT OUT Data Cable DATA 1. Connect the DATA jack of the TV to the ETH MODEM jack of the STB (SBB) with the Data cable. ✎ The "ETH MODEM" jack name that you connect the Data Cable to may differ depending on the SBB or STB type. English 12 [HG670677-ZA]Install Guide-ENG.indd 12 2013-02-25 �� 2:19:19
Resumen del contenido incluido en la página 13
¦ List of SI Vendors and Compatible Data Cables Supplied with the TV y Confirm you are using the correct data cable for your SI vendor. Refer to the code label on the data cables. y Contact your nearest dealer or your SI Vendor to buy the data cable not included in the TV. Confirm the code on the Code Label Note the labeled end. Note the labeled end. SI Vendor Cable code Pin assign Remark Samsung Only Provided with OCC BN39-00865B NB670 and NB677 Enseo models. Guest-Tek NXTV BN39-01011B nStre
Resumen del contenido incluido en la página 14
¦ Connecting the Audio Output to an Audio Amplifier Audio AUDIO IN Amplifier TV Rear Panel AUDIO OUT 1 Stereo cable 1. Connect the AUDIO OUT port of the TV to the Audio In port of an audio amplifier with a stereo cable. English 14 [HG670677-ZA]Install Guide-ENG.indd 14 2013-02-25 �� 2:19:20
Resumen del contenido incluido en la página 15
VIDEO AUDIO RS/232 Connecting the RJP (Remote Jack Pack) Connect the input jacks on the TV to the RJP. The RJP lets guests connect audio and video sources to the TV. 3 HDMI cable TV Rear Panel USB HDMI S-VIDEO RCA AUDIO/PC HDMI IN 2 (DVI) US USB B ( (5V 0.5A 5V 0.5A) ) / / CL CLO ONIN NING G RJP Rear HDMI IN 1 DVI AUDIO IN HDMI IN 1 PC Audio cable 3 (ARC) EX-LINK AV IN A AU UD DIO OUT IO OUT 2 V ideo / Audio Cable D DIGI IGIT TA AL L AU AUDIO OU DIO OUT T ( (O OPTICA PTICAL L) ) ANT IN ANT IN
Resumen del contenido incluido en la página 16
y RJP (Remote Jack Pack): The RJP is a hardware module that has different Audio Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding outputs are connected from the RJP to the TV. The RJP communicates with the TV via RS232. The RJP communicates with the TV by sending messages regarding Active/Inactive sources. – A group of hotel menu items let you assign numbered priorities to the jacks of the RJP. (See page 19). 1 is the highest priority and 3 is the lowest. W
Resumen del contenido incluido en la página 17
Setting the Hotel Option Data To let you control how the TV functions when in Hotel mode, the TV has two Hotel mode menus, the Stand-alone mode menu and the Interactive mode menu. The menu items that differ between the menus are listed below. Menu items in the Stand-alone mode only: – SI Vendor : Smoovie – REACH Server and its submenus. Menu items in the Interactive mode only: – SI Vendor: Samsung and other vendors. All other items appear in both menus. To access the menus, press MUTE → 1 → 1 →
Resumen del contenido incluido en la página 18
¦ Menu Items To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order. To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any changes you made are saved. Menu Item initial Value Description Select Hospitality mode. Hospitality Hospitality y Interactive mode : TV works with an SI STB or SBB. Standalone Mode Mode y Stand-alone mode : TV works alone, without an SI STB or SBB. y Interactive mode : Samsung / OCC / MTI
Resumen del contenido incluido en la página 19
Menu Item initial Value Description Turning the front panel (local key) operations on/off. y Unlock : Unlocks all panel keys. Panel Button y Lock : Locks all panel keys. Operation Unlock Lock y OnlyPower : Locks all panel keys except the Power panel key. y Menu/Source : Locks the Menu and Source panel keys. Select the way to update clock data. Use clock data from a DTV channel to set the clock automatically or set the clock manually when Clock Local Time Manual the TV is in stand-alone mode. A
Resumen del contenido incluido en la página 20
Menu Item initial Value Description Adjusts the brightness of the TV to reduce power consumption. y Off: Turns off the energy saving function. y Low: Sets the TV to low energy saving mode. Eco Solution Energy Saving OFF y Medium: Sets the TV to medium energy saving mode. y High: Sets the TV to high energy saving mode. Welcome Displays a the Welcome Message for 5 seconds when the TV turns On. See Page 22. OFF Message Edit Welcome Edits the Welcome Message. Message Turns the Hospitality logo fe
