Manual de instrucciones de Atwood Mobile Products MPD 87850

Resumen del contenido incluido en la página 1

LITERATURE NUMBER MPD 87850
BOLT SWIVEL
RETAINING RING SWIVEL
TUBULAR SWIVEL
9
JACKS
ENGLISH, FRANCAIS (et Canada) •Installation •Operation •Maintenance
Effective 12/10/07
SAFETY ALERT SYMBOLS RETAINING RING SWIVEL JACKS
Instructions are for single lock pin swivel jacks.
Safety Symbols alerting you to potential personal safety hazards.
Obey all safety messages following these symbols. CHOOSE THE CORRECT MOUNTING BRACKET - SEE ILLUSTRATIONS
• type of jack
• size of trailer frame
 WARNING  CA

Resumen del contenido incluido en la página 2

TUBULAR SWIVEL JACKS WARNING  USE ONLY ATWOOD MOUNTING TUBES WITH ATWOOD TUBULAR SWIVEL JACKS JACK MAY FALL IF NOT PROPERLY ENGAGED Bracket Mounting: • SINGLE LOCK PIN STYLE - Locking pin end must be inserted fully into 1. Assemble jack with tube (4A) and pin (4B) installed. Use this as a bracket pin hole. Lock Pin shoulder must contact bracket tab before templet prior to welding use. Do not raise or lower tongue if the handle is not correctly locked. 0 2. Tack a weld at two spots at 180 apart

Resumen del contenido incluido en la página 3

2 3

Resumen del contenido incluido en la página 4

ATWOOD HARDWARE SYSTEMS & COMPONENTS LIMITED WARRANTY Atwood Mobile Products warrants to the original owner this product will be free of defects in material and workmanship for a period of two years from the date of purchase. Atwood’s liability hereunder is limited to the replace- ment of product, repair of product or replacement of product with a recondi- tioned product, at the discretion of the manufacturer. The warranty is void if the product has been damaged by accident, unreasonable use, ne