Manual de instrucciones de Advent CCS562

Resumen del contenido incluido en la página 1

Model: CCS562
Commercial Camera System
(IR Camera & 5.6” Monitor)
Installation Manual










Features
• 5.6” High Resolution LCD Monitor
• Built in Speaker
• Two video inputs
• Fully Adjustable
• Auto brightness adjustment
• Commercial camera with Infra Red Capability and Built in
Microphone using Sony CCD technology.
• 12v or 24v power.

Resumen del contenido incluido en la página 2

Table of Contents Warnings......................................................................................3 Product Description .....................................................................4 Packing List .................................................................................4 System Installation......................................................................5 Wiring Diagram ...........................................................................7 Specifica

Resumen del contenido incluido en la página 3

Warnings The product is intended to assist in safe driving and to allow the driver to have a broader rear view while the vehicle is in reverse. You, as the driver, are solely responsible for the safe operation of your vehicle and the safety of your passengers according to local traffic regulations. Do not use any features of this system to the extent it distracts you from safe driving. Your first priority while driving should always be the safe operation of your vehicle. Audiovox Elect

Resumen del contenido incluido en la página 4

Product Description This advanced high resolution monitor and camera system will show a clear picture from a reversing camera or any other video source. The heavy duty design and high quality components make the CCS562 ideal for all industrial and commercial applications. The integrated wiring harness and single power wire make this system simple and fast to install. Packing List CCS562 Parts Barcode # Quantity Monitor 30272030 1 Camera 30272390 1 20M Extension Cable & 2 Ada

Resumen del contenido incluido en la página 5

System Installation 1. Choose the mounting location for the CAM150 commercial camera on the rear of the vehicle. We recommend a position as high as possible and in the center of the vehicle. 2. Choose a suitable place in the vehicle cabin to mount the 5.6” LCD Screen. We recommend dash mounting in the corner of the vehicle. 3. Examine the vehicle to determine the best way to run the power wires to: LCD monitor, accessory power, the reverse lights and to the camera at the rear of th

Resumen del contenido incluido en la página 6

Wiring the Camera to the Vehicle’s Reverse Lamp 1. Locate the reverse lamp in the tail light assembly. 2. Using the tap connector supplied, perform the following steps: a) Place the un-stripped positive lead from the tail lamp in the run channel, which runs completely through the connector. b) Insert the un-stripped red power wire from the camera completely into the other channel in the connector. c) Make the connection between the wires by crimping down the metal connector with a

Resumen del contenido incluido en la página 7

Wiring Diagram Note: The power and signal will be provided through a single cable from the monitor. 7

Resumen del contenido incluido en la página 8

Specifications 1. Voltage: DC12V-DC24V 2. Current: 7w 3. LCD Brightness: 350cd/m2 4. LCD Contrast Ratio: 300:1 5. Image Display: Selectable Normal/Reverse Image 6. LCD: Adjustable Viewing Angle 7. Camera Viewing Angle: 150 degrees 8. Minimum Illumination: 0 Lux (w/ Infra Red) 9. Horizontal Resolution: 420 TV Lines 10. Dimensions: LCD (150x126x27)mm Camera (82x73x58)mm Troubleshooting Symptom Solution No power to the monitor 1. Check that reverse power is attached to orange wire

Resumen del contenido incluido en la página 9

7

Resumen del contenido incluido en la página 10

© 2008 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788 8