Resumen del contenido incluido en la página 1
OWNER'S MANUAL
58CM CORDLESS REMOTE LCD TELEVISION & MONITOR
MODEL: TFTV580
N111
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Resumen del contenido incluido en la página 2
Contents 1 Important Safety Precautions .......................................................................................................... 4 Control Panel and Back Terminals .................................................................................................. 4 Control Panel ......................................................................................................................... 5 Back Terminals ................................................................
Resumen del contenido incluido en la página 3
Important Safety Precautions Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the se
Resumen del contenido incluido en la página 4
Important Safety Precautions 12. Stand --- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. When mounting the product on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recom
Resumen del contenido incluido en la página 5
Important Safety Precautions 22. Power source --- This product is intended to be supplied by a listed power supply indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the product due
Resumen del contenido incluido en la página 6
Control Panel and Back Terminals Control Panel Remote Sensor Power Indicator A blue indicator lights when the power is on and a red indicator lights when in the standby mode. 1. POWER Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY 2. MENU Press this button to access the Menu main page 3. SOURCE To access signal source select menu 4. VOL+/- Press the VOL+ or VOL- button to directly increase or decrease the sound volume level; In OSD Menu, p
Resumen del contenido incluido en la página 7
Control Panel and Back Terminals Back Terminals AUDIO VGA VGA IN LINE Y PB COMPONENT IN PR 1. Antenna input Allows you to connect cable or outdoor antenna 2. Headphone jack 3. AVI inputs (Video, Audio L, R) / S-Video input Receive video/audio signals from external sources such as VCR or DVD player. Receive a S-Video signal from external source such as VCR or DVD player. 4. AV2 inputs (Video, Audio L, R) Receive video/audio signals from external sources such as VCR or DVD player. 5. AV outputs (
Resumen del contenido incluido en la página 8
Remote Control Unit Power on/standby Mute Direct channel selector Previous channel Channel up/down Volume up/down selector selector Sound mode select Stereo mode select Auto correct Picture mode select picture in VGA Display the current state LEFT/RIGHT button: In the menu operation, UP/DOWN button: adjust the selected item In menu operations, used to select item. Access the menu Select the input Setting sleep timer signal source 6
Resumen del contenido incluido en la página 9
Remote Control Unit Batteries for the Remote Control If the remote control fails to operate the LCD TV functions, replace the batteries in the remote control. 1 Open the battery cover. 2 Insert two size-AAA batteries. (Place the batteries with their terminals corresponding to the (+) and (-) indications in the battery compartment.) 3 Replace the cover. Effective range of the remote control Notes: When the remote control will not be used for a long 1. period of time or when the batteries are worn
Resumen del contenido incluido en la página 10
Installation Antenna Connection Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular area. Note: It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave conditions. The aerial cable should not be bundled with the power cord and the like. Power connection Household AC-INPUT power outlet Plug into
Resumen del contenido incluido en la página 11
Installation Connecting External Device Notes about connection 1. Carefully check the terminals for position and type before making any connections. 2. Loose connectors will result in image or colour problems. Make sure that all connectors are securely inserted into their terminals. 3. When connecting an external device, turn off the power of the main unit first to prevent any possible damage. 4. Please refer to the instruction manual of the equipment to be connected as well. Composite V
Resumen del contenido incluido en la página 12
Installation The PC input signal connection Connect the VGA (D-Sub) signal terminal on the TV to the output of PC equipment through Min D-sub 15 pin cable as illustrated. Connect a cable, which matches the audio output terminal on the computer. If you select PC signal, please set the input signal source of LCD-TV to RGB mode. To VGA output To VGA input To audio output To audio input Equipment with VGA output Notes: 1. The native display resolution is 1280 768. If the signal resolution exceed the
Resumen del contenido incluido en la página 13
Installation AV OUT connection To audio inputs R Y Yellow (video) W W White (audio, L) R Red (audio, R) Audio amplifier To audio outputs AUDIO R To audio input W R Y To video output W Y VCR To video input How to connect: Connect the video/audio output terminals on the TV set to the signal input terminals of the VCR equipment or the video/audio input terminals on other TV set through video/audio cable. Connect the audio output terminals on the TV set to the Audio amplifier through audio cable. H
Resumen del contenido incluido en la página 14
Installation YPbPr/YCbCr input connection If the signal/source is the equipment with YPbPr/YCbCr output terminals, we recommend you to use the YPbPr/YCbCr terminals on the equipment. Please connect it with the YPbPr/YCbCr input terminals on the TV set for better picture quality. And connect the audio outputs of it with the corresponding audio input terminals on the TV set. If you select YPbPr/YCbCr signal, please set the input signal source of the LCD-TV to YPbPr mode. White (audio, L) Red (audi
Resumen del contenido incluido en la página 15
Basic Operations Turning On 1 Connect the Power correctly. 2 The indicator lights up, the unit is in STANDBY mode. 3 Press the POWER ( ) button on the remote control or on the unit to turn on the TV set. Turning Off 1 With the power on, press the POWER ( ) button to turn off the TV and the TV is in STANDBY mode. 2 If you want to turn off the power completely, unplug the power cord from the wall outlet. Notes: The unit automatically goes to STANDBY mode by: A. Without input signal for ab
Resumen del contenido incluido en la página 16
Channel Setting There are two ways to preset channels: to preset channels automatically and to preset channels manually. Below we will describe how to preset the channels by making use of the menu. Auto Search channel number 9 1 Access Channel Setting menu. skip off on manual search 2 Press UP/DOWN button repeatedly to highlight auto search item. auto search fine tune 3 Press LEFT/RIGHT to start Auto Search. channel edit All active channels will be preset and stored into the memory
Resumen del contenido incluido en la página 17
Channel Selection Using Keypad Buttons 1 To select one-digit channel numbers: Input the channel using the 0-9 number button, then wait for about 2 seconds. 2 To select two-digit channel numbers: Press -/-- button to display --, then input the channel using the 0-9 number button. To select three-digit channel numbers: 3 Press -/-- button to display ---, then input the channel using the 0-9 number button. Note: The period between presses should be within 2 seconds. Using CH+/- Buttons 1 Press CH+
Resumen del contenido incluido en la página 18
Adjusting Picture and Sound Picture Adjustment Access Picture Setting menu by pressing MENU button. 1 brightness 50 contrast 2 Press UP/DOWN to select the item that you want to adjust. 50 color 16 3 Press LEFT/RIGHT to adjust selected item. sharpness 32 tint 0 Item Function Range brightness To adjust picture's brightness 0-100 contrast To adjust picture's contrast 0-100 To adjust picture's colour color 0-32 To adjust pictures sharpness sharpness 0-63 To adjust picture's tint Tint* -32-+31 Note:
Resumen del contenido incluido en la página 19
Adjusting Picture and Sound Setting Sound Output 1 Access Audio Setting menu. sound output Speaker bass 0 0 treble 2 Press UP/DOWN to select sound output item. 0 balance Press LEFT/RIGHT to select speaker, earphone or speaker + earphone. 3 Adjusting Bass or Treble Access Audio Setting menu. 1 sound output Speaker 2 Press UP/DOWN to select bass or treble item. bass 0 0 treble 0 balance 3 Press LEFT/RIGHT to adjust. Adjusting Balance 1 Access Audio Setting menu. sound output Speaker 2 Press UP/DOW
Resumen del contenido incluido en la página 20
System Setting Setting Blue Screen 1 Access System Setting menu. blue screen on off scaler mode fill all 2 Press UP/DOWN to select blue screen item. color sys. Auto sound sys. B/G 3 Press LEFT/RIGHT to select on or off. sleep time 10 minutes If you set this item to on, the unit displays a blue screen when there is no input signal. Note: Only when the Blue Screen is On, the set will turn off automatically after 15 minutes if there is no input signal (in TV or AV mode). Setting Color System
