Resumen del contenido incluido en la página 1
User’s Manual
MultiSync X461UN
Resumen del contenido incluido en la página 2
Index Declaration of conformity ............................................................................................................................. English-1 Important Information ................................................................................................................................... English-2 WARNING, CAUTION ........................................................................................................................ English-2 Declaration ........
Resumen del contenido incluido en la página 3
Declaration of conformity For USA FCC Information 1. Use the attached specified cables with the MultiSync X461UN (L468TP) color display so as not to interfere with radio and television reception. (1) Please use the supplied power cord or equivalent to ensure FCC compliance. (2) Please use a good quality shielded video signal cable. Use of other cables and adapters may cause interference with radio and television reception. 2. This equipment has been tested and found to comply with the limits for
Resumen del contenido incluido en la página 4
Important Information WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE
Resumen del contenido incluido en la página 5
Safety Precautions, Maintenance & Recommended Use FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE Recommended Use FOLLOWING WHEN SETTING UP AND USING • For optimum performance, allow 20 minutes for warm-up. THE MULTI-FUNCTION MONITOR: • Rest your eyes periodically by focusing on an object at least • DO NOT OPEN THE MONITOR. There are no user 5 feet away. Blink often. serviceable parts inside and opening or removing covers • Position the monitor at a 90° angle to windows and other may expose you to dang
Resumen del contenido incluido en la página 6
Contents Your new MultiSync monitor box* should contain the following: • LCD monitor • Clamp x 3 1 • Power cord* • Screw (black) for cable cover (M4 x 8) x 6 •Video Signal Cable • Screw (silver) for clamp (M4 x 10) x 3 • Remote control cable • CD-ROM • Setup Manual • Thumbscrew for stand x 2 • Cable cover Video Signal Cable (Mini D-SUB 15 pin to Mini D-SUB 15 pin) Screw (black) for cable Screw (silver) for Thumbscrew for stand x 2 1 Power Cord* cover (M4 x 8) x 6 clamp (M4 x 10) x 3 Remote contr
Resumen del contenido incluido en la página 7
Installation This device cannot be used or installed without the Tabletop Orientation Stand or other mounting accessory for support. For proper • When using the display in the portrait position, the installation it is strongly recommended to use a trained, monitor should be rotated clockwise so that the left side NEC authorized service person. Failure to follow NEC is moved to the top, right side is moved to the bottom. standard mounting procedures could result in damage to the This will allow f
Resumen del contenido incluido en la página 8
3. Ventilation Requirements Attaching Mounting Accessories When mounting in an enclosed space or recessed area, The display is designed for use with the VESA mounting leave adequate room between the monitor and the system. enclosure to allow heat to disperse, as shown below. 1. Attach Mounting Accessories Be careful to avoid tipping monitor when attaching accessories. VESA Mounting Interface Allow adequate ventilation or provide air conditioning around the monitor, so that heat can properly diss
Resumen del contenido incluido en la página 9
Parts Name and Functions Control Panel POWER button DOWN button Switches the power on/off. See also page 16. Activates the OSD menu when the OSD menu is turned-off. Acts as button to move the highlighted area down to select adjustment items within OSD menu. MUTE button Switches the audio mute ON/OFF. EXIT button Activates the OSD menu when the OSD menu is turned-off. INPUT button Acts as EXIT button within the OSD to move to previous Acts as SET button within OSD menu. (Toggle switches men
Resumen del contenido incluido en la página 10
Terminal Panel In Out Option control unit In Out Main Power Switch VIDEO IN connector (BNC and RCA) On/Off switch to turn main power ON/OFF. To input a composite video signal. BNC and RCA connectors are not available at the same time (Use only one input). AC IN connector VIDEO OUT connector (BNC) Connects with the supplied power cord. To output the composite video signal from the VIDEO IN HDMI connector connector. To input digital HDMI signals. DVD/HD connector (RCA) DVI IN (DVI-D) Connec
Resumen del contenido incluido en la página 11
Kensington Lock For security and theft prevention. Remote control sensor Receives the signal from the remote control. AMBIENT LIGHT SENSOR Detects the level of ambient light, allowing the monitor to make adjustments to various settings, resulting in a more comfortable viewing experience. Do not cover this sensor. See page 18. Option board slot Slot for board accessories. Please contact your supplier for detail information. English-9 English
Resumen del contenido incluido en la página 12
Wireless Remote Control (Optional) KEYPAD Press buttons to set and change passwords, change channel and set REMOTE ID. ENT button* Sets channels. DISPLAY button Turns on/off the information OSD. See page 17. MENU button Turns on/off the menu mode. AUTO SETUP button Enters auto setup menu. See page 20. EXIT button Returns to previous menu within OSD menu. UP/DOWN button Acts as button to move the highlighted area up or down to select adjustment items within OSD menu. Small screen which a
Resumen del contenido incluido en la página 13
REMOTE ID button Operating Range for the Option Activates REMOTE ID function. Remote Control MTS button* Point the top of the remote control toward the sensor unit’s remote control sensor in optional control kit during button Multichannel television sound. operation. AUDIO INPUT button Use the remote control within a distance of about 7 m (23 ft.) Selects audio input source [IN1], [IN2], [IN3], [HDMI], [TV]*. from remote control sensor or at a horizontal and vertical angle of within 30° withi
Resumen del contenido incluido en la página 14
Setup NEC recommends the following battery use: 1. Determine the installation location • Place “AA” size batteries matching the (+) and (-) signs CAUTION: Installing your LCD display must be done by a on each battery to the (+) and (-) signs of the battery qualified technician. Contact your dealer for compartment. more information. • Do not mix battery brands. CAUTION: MOVING OR INSTALLING THE LCD MONITOR • Do not combine new and old batteries. This can shorten MUST BE DONE BY TWO OR MORE PEOPLE
Resumen del contenido incluido en la página 15
5. Attach the cable cover • Use six of the M4 x 8 screws (black) (included) to attach the cable cover. 6. Switch on the power of all the attached external equipment When connected with a computer, switch on the power of the computer first. 7. Operate the attached external equipment Display the signal from the desired input source. 8. Adjust the sound Make volume adjustments when required. 9. Adjust the screen (See pages 20 and 21) Make adjustments of the screen display position when necessary. 1
Resumen del contenido incluido en la página 16
Connections Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Wiring Diagram DVD player DVD player Second monitor with HDMI out Stereo Amplifier VCR or DVD DVD player with Player SCART OUT Computer (Analog) Computer (Digital) Connected Connecting Setting in Terminal Mode Input signal Connecting Input button equipment terminal name Audio terminal in remote control DVD
Resumen del contenido incluido en la página 17
Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer’s screen image. Some video cards and a pixel clock over 162MHz may not display an image correctly. Your LCD monitor displays proper image by adjusting the factory preset timing signal automatically. Scanning frequency Remarks Resolution Horizontal Vertical 640 x 480 31.5kHz 60Hz 800 x 600 37.9kHz 60Hz 1024 x 768 48.4kHz 60Hz 1280 x 768 48kHz 60Hz 136
Resumen del contenido incluido en la página 18
Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red or amber while powered off. NOTE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the Power Button on the front of the LCD. OFF Main Power Switch ON Power Button Using the optional remote control English-16
Resumen del contenido incluido en la página 19
NORMAL: Displays the aspect ratio the same as it is sent Power Indicator from the source. Mode Status Indicator Light FULL: Fills entire screen. 2 Power ON Green* WIDE: Expands a 16:9 letter box signal to fill entire screen. 1 Power OFF (Eco Standby)* Red ZOOM (DYNAMIC): Expands a 4:3 pictures to fill the entire 3 Power consumption under 0.5W* screen with non-linearity. Some of the outside image area Power OFF (Standby) Amber 3 Power consumption under 2W* will be cut off due to expansion. Power
Resumen del contenido incluido en la página 20
Picture Mode DVI, VGA, RGB/HV STANDARD sRGB AMBIENT1 AMBIENT2 HIGHBRIGHT HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* STANDARD CINEMA AMBIENT1 AMBIENT2 HIGHBRIGHT AMBIENT Mode The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient light within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordingly. The purpose of this function is to make the viewing exper
