Resumen del contenido incluido en la página 1
AccuSync LCD22WMGX
AccuSync LCD24WMCX
User’s Manual
Resumen del contenido incluido en la página 2
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK • DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS IN
Resumen del contenido incluido en la página 3
For the Customer to use in U.S.A. or Canada Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouiller du Canada. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CSA C22.2 No. 60950-1. Ce produit porte la marque ‘C-UL’ et se conf
Resumen del contenido incluido en la página 4
Contents Your new NEC LCD monitor box* should contain the following: • LCD monitor with tilt base • Power Cord •Video Signal Cable (15-pin mini D-SUB to 15-pin mini D-SUB male) •Video Signal Cable (DVI-D to DVI-D) • Audio Cable • User’s Manual • CD-ROM • Base Stand • Cable Holder Audio Cable DVI-D to DVI-D User’s Manual Power Cord 15-pin mini D-SUB Cable Holder CD-ROM LCD monitor to 15-pin mini (Stand not connected) D-SUB male * Remember to save your original box and packing material to transpor
Resumen del contenido incluido en la página 5
LCD22WMGX LCD24WMCX 1 SPDIF OUT Outputs the Digital audio signal from HDMI (COAXIAL). 2 Component (Audio) Connects Component Audio. 3 Component (Video) Connects Component Video. 4 Headphone Jack Connects headphones to the monitor. 5 AUDIO IN Connects audio input from PC. 6 D-SUB Connects to analog RGB input. 7 DVI-D Connects to digital RGB input. 8 HDMI Connects to digital HDMI signals. 9 AC IN Connects power cord to monitor. 10 Kensington Lock Opening Monitor can be secured using a Kensington l
Resumen del contenido incluido en la página 6
3. Connect one end of the power cord to the monitor and the other end to the power outlet. Use the Cable holder to keep the Video Signal Cable, Audio cable and power cord together (Figure B.1). 4. To attach the Cable Holder: Attach the Cable Holder on to the Base. Insert the hooks on the Cable Holder into the holes at the back of the Stand and slide the Cable Holder downward into place (Figure B.1). NOTE: Please confirm that the tabs are completely secure. NOTE: Adjust position of cable that pla
Resumen del contenido incluido en la página 7
Connecting to DVD player, Stereo Amplifier 1. Turn off the power to the monitor. 2. For the DVD player with component out: Connect the Component connecter (RCA) on the LCD monitor, use a separately available RCA connector cable (Figure D). For the DVD Player with HDMI out: Connect HDMI cable to the DVD player (Figure D). NOTE: Refer to your DVD player user’s manual for more information. For the Stereo Amplifier: Connect HDMI cable to the DVD player. Connect the stereo RCA cable to the SPDIF (COA
Resumen del contenido incluido en la página 8
Remove Monitor Stand for Mounting To prepare the monitor for alternative mounting purposes: 1. Disconnect all cables. 2. Place monitor face down on a non-abrasive surface (Figure R.1). 3. Remove the 3 screws connecting the monitor to the stand and remove the stand as indicated (Figure R.1). The monitor is now ready for mounting in an alternative manner. 4. Connect the AC cord to the back of the monitor (Figure R.2). 5. Reverse this process to re-attach stand. NOTE: Use only VESA-compatible alter
Resumen del contenido incluido en la página 9
Controls OSD (On-Screen Display) control buttons on the front of the monitor function as follows: 1. Basic Key function SOURCE AUTO MENU - / < + / > Button OSD Off Select Signal Active Auto Shortcut to volume Shortcut to volume OSD displayed Adjustment function window. window. (Press over 2 seconds) OSD ON Act Exit-key Cursor moves up Cursor moves down Go to Sub menu (Main menu selection selection stage stage) OSD ON Act Exit-key Cursor moves up Cursor moves down Go to Adjustment stage (Sub menu
Resumen del contenido incluido en la página 10
Luminance Color Temp. Contrast Normal Contrast from Digital-register. Recalls Normal Color Temperature. (RGB value is non-adjustable). Brightness Warm Backlight Adjustment. Recalls Warm Color Temperature. (RGB value is non-adjustable). DV Mode Adjusts picture as following. Cool Standard: Brightness = 90, Contrast = 50 (adjustable) Recalls Cool Color Temperature. Text: Brightness = 20, Contrast = 80 (RGB value is non-adjustable). (nonadjustable) Internet: Brightness = 40, Contrast = 80 sRGB (for
Resumen del contenido incluido en la página 11
Demo DDC/CI Enhances Area in half Picture. Turns on or off the two-way communication Whether DEMO on or off, it is effected Full between the graphics card and the monitor. Enhance, Nature-Skin, Green-Field, Sky-blue, With DDC/CI turned on, some monitor settings Auto Detect displays in the left side screen. can be adjusted through the graphics card using a computer. Picture Boost Reset Clears each old status of Auto-configuration and Frame Size (When Bright Frame is ON) sets the color temperatur
Resumen del contenido incluido en la página 12
Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOUR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabinet slots, a
Resumen del contenido incluido en la página 13
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 40 cm and no further away than 70 cm from your eyes. The optimal distance is 50 cm. • Rest
Resumen del contenido incluido en la página 14
Specifications - LCD22WMGX Monitor Specifications AccuSync LCD22WMGX Monitor Notes LCD Module Diagonal: 55.9 cm/22 inches Active matrix; thin film transistor (TFT) Viewable Image Size: 55.9 cm/22 inches liquid crystal display (LCD); 0.282 mm dot 2 Native Resolution (Pixel Count): 1680 x 1050 pitch; 300 cd/m white luminance, 1000:1 contrast ratio, typical, response time: 5 ms. Input Signal PC INPUT: Video: Analog Input: 0.7 Vp-p/75 Ohms Digital Input: DVI Sync: Separate sync. TLT Level (Positive/
Resumen del contenido incluido en la página 15
Specifications - LCD24WMCX Monitor Specifications AccuSync LCD24WMCX Monitor Notes LCD Module Diagonal: 61 cm/24 inches Active matrix; thin film transistor (TFT) Viewable Image Size: 61 cm/24 inches liquid crystal display (LCD); 0.270 mm dot 2 Native Resolution (Pixel Count): 1920 x 1200 pitch; 400 cd/m white luminance, 1000:1 contrast ratio, typical, response time: 5 ms. Input Signal PC INPUT: Video: Analog Input: 0.7 Vp-p/75 Ohms Digital Input: DVI Sync: Separate sync. TLT Level (Positive/Nega
Resumen del contenido incluido en la página 16
Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The small footprint and low weight allow it to be moved or transported easily from one location to another. No-touch Auto Adjust: No-touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup. Plug and Play: The Microsoft solution with the Windows operating system facilitates setup and installation by allowing the monitor
Resumen del contenido incluido en la página 17
Troubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Check front power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.) • Check the monitor and your display card with respect to compatibility and
Resumen del contenido incluido en la página 18
TCO’06 (LCD24WMCX Only) Congratulations! The product you have just purchased carries the TCO’06 Media Displays label. This means that your display is designed and manufactured according to some of the strictest performance and environmental criteria in the world. The manufacturer of this display has selected it to be certified to TCO’06 Media Displays as a sign of usability, high performance and reduced impact on the natural environment. Products certified to TCO´06 Media Displays are specifical
Resumen del contenido incluido en la página 19
Manufacturer’s Recycling and Energy Information NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally- friendly products, and always strive to help define and comply with the latest independent standards from agencies such as ISO (International Organisation for Standardization) and TCO (Swedish Trades Union). Disposin
