Manual de instrucciones de Marshall electronic V-R53P

Resumen del contenido incluido en la página 1

Marshall
V-R53P Instruction Sheet
Broadcast Multimedia Division http://www.LCDRacks.com e-mail: sales@mars-cam.com
The V-R53P is a rack mounted unit that has three independently controlled 5” active matrix LCD panels with loop
through capability. These 5” panels have 960x234 pixels making them a true high resolution LCD panel. This unit also
has a unique feature that allows the unit to tilt up or down for optimum viewing angle. The unit fits into a EIA standard
19” rack, three rack spaces hig

Resumen del contenido incluido en la página 2

M Ma arrssh ha allll 5. Tally - The tally system on the V-R53P is accessed via the DB-15 connector on the back of the unit. The system works by closing the contacts between the ground pin and the corresponding LED pin. The system is self powered, DO NOT GIVE POWER TO THE PINS. The pinout is as follows: Green Red Yellow Monitor 1 Pin 1 Pin 2 Pin 3 Monitor 2 Pin 6 Pin 7 Pin 8 Monitor 3 Pin 11 Pin 12 Pin 13 PINS 4, 5, 9, 10, 14 and 15 ARE COMMON GROUNDS Warranty Marshall Electronics warranties