Resumen del contenido incluido en la página 1
PLASMA MONITOR
OWNER’S MANUAL
MODELS : MU-42PZ44/44M/44V
MU-42PZ44A/44MA/44VA
MU-42PZ44B/44MB/44VB
MU-42PZ44K/44MK/44VK
MU-42PZ44R/44MR/44VR
MU-42PZ44S/44MS/44VS
MU-42PZ90/90M/90V
MU-42PZ90A/90MA/90VA
MU-42PZ90B/90MB/90VB
MU-42PZ90K/90MK/90VK
MU-42PZ90R/90MR/90VR
MU-42PZ90S/90MS/90VS
Please read this owner’s manual carefully before operating the
Monitor.
Retain it for future reference.
Record model number and serial number of the Monitor.
See the label attached on the back of the Monitor and quo
Resumen del contenido incluido en la página 2
Warning Warning Warning WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi- cient magnitude to constitute a risk of electric shock to persons.
Resumen del contenido incluido en la página 3
Safety Instructions Safety Instructions Safety Instructions Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential elec- trical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. Observing the simple preca
Resumen del contenido incluido en la página 4
Safety Instructions Safety Instructions continued Safety Instructions continued 14. Outdoor Antenna Grounding 19. Servicing If an outside antenna or cable system is connected to the Do not attempt to service this product yourself as opening or product, be sure the antenna or cable system is grounded so removing covers may expose you to dangerous voltage or as to provide some protection against voltage surges and other hazards. Refer all servicing to qualified service per- built-up static charges
Resumen del contenido incluido en la página 5
Contents Contents Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Screen Menu Options Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3~4 Auto Adjustment . . . . . . . . . . . . . . . . . . . . . . . .21 Setting Picture Format . . . . . . . . . . . . . . . . . . .21 Introduction Picture Size Zoom . . . . . . . . . . . . . . . . . . . . . .21 Controls and Connection Options . . . . . . . . . . . .7 Adjusting Horizontal/Vert
Resumen del contenido incluido en la página 6
Introduction Introduction Introduction What is a Plasma Display Panel (PDP)? If voltage is applied to gas within glass panels, ultraviolet rays are produced and fused with a fluorescent substance. At that instant, light is emitted. A Plasma Display is a next generation flat Display using this phenomenon. 160° - Wide angle range of vision Your flat panel plasma screen offers an exceptionally broad viewing angle -- over 160 degrees. This means that the display is clear and visible to viewers anyw
Resumen del contenido incluido en la página 7
INPUT SELECT MENU VOL. Introduction Controls Controls Front Panel Controls Front Panel Controls - This is a simplified representation of front panel. Here shown may be somewhat different from your monitor. ON/OFF E, D Buttons Main Power Button INPUT SELECT Button VOLUME (F,G) Buttons MENU Button Remote Control Sensor Power Standby Indicator Illuminates red in standby mode, Illuminates green when the Monitor is turned on Connection Options Connection Options Back Connection Panel Back Connectio
Resumen del contenido incluido en la página 8
Introduction Remote Control Key Functions Remote Control Key Functions - When using the remote control, aim it at the remote control sensor on the monitor. - Under certain conditions such as if the remote IR signal is interrupted, the remote control may not function. Press the key again as necessary. POWER INPUT SELECT Switches the monitor between Selects source: Video, S-Video, ON and STANDBY. Component, RGB, or DVI mode. MULTIMEDIA Selects: Component, RGB, or DVI DASP mode. Selects the sound
Resumen del contenido incluido en la página 9
Installation Installation Installation Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. POWER SLEEP INPUT SELECT APC DASP ARC PIP ARC PIP TWIN PICTURE SWAP SUB INPUT MENU MUTE VOL OK VOL 12 3 45 6 78 9 0 POWER STOP P/STILL 1.5V REW PLAY FF REC WIN.SIZE WIN.POSITION SPLIT ZOOM ZOOM - ZOOM + Owner’s Manual Batteries BNC-RCA Adapter Remote Control D-sub 15 pin Cable Power Cord DVI-D Ca
Resumen del contenido incluido en la página 10
Installation Installation Instructions continued Installation Instructions continued Desktop Pedestal Installation Desktop Pedestal Installation For proper ventilation, allow a clearance of 4” on each side and the top, 2.36” on the bottom, and 2” from the wall. Detailed installation instructions are included in the optional Desktop Stand Installation and Setup Guide, see your dealer. 2 inches 4 inches 4 inches 4 inches 2.36 inches Wall Mount: Vertical installation (MU-42PZ44M/44V/90M/90V series
Resumen del contenido incluido en la página 11
Installation External Equipment Connections External Equipment Connections NOTE: All cables shown are not included with the plasma display. VCR Setup VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and Monitor - Use the ISM Method feature to avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed image may remain visible on the screen. How to
Resumen del contenido incluido en la página 12
Installation External A/V Source Setup External A/V Source Setup How to connect 1. Connect the provided BNC-RCA adapter to the monitor’s VIDEO INPUT. 2. Connect the audio and video cables from the external YPB PR (MONO) equipment's output jacks to the monitor input jacks, as R AUDIO L R AUDIO L shown in the figure. When connecting the monitor to exter- REMOTE VIDEO AUDIO INPUT COMPONENT INPUT S-VIDEO AUDIO INPUT CONTROL INPUT nal equipment, match the jack colors (Video = yellow, Audio Left = whi
Resumen del contenido incluido en la página 13
Installation PC Setup PC Setup - This Plasma display provides Plug and Play capability, meaning that the PC adjusts automatically to its settings. The monitor sends configuration information (EDID) to the PC using the Video Electronics Standard Association (VESA) Display Data Channel (DDC) protocol. How to connect 1. To get the best picture quality, adjust the PC graphics card to 800x600, 60Hz. 2. Use the monitor’s RGB INPUT or DVI (Digital ( ) ( ) ( ) ( ) R L Visual Interface) INPUT port fo
Resumen del contenido incluido en la página 14
Installation Monitor Display Specifications (RGB-PC /DVI-PC Mode) Horizontal Vertical Horizontal Vertical Resolution Resolution Frequency(KHz) Frequency(Hz) Frequency(KHz) Frequency(Hz) 31.468 70.09 35.156 56.25 640x350 37.861 85.08 37.879 60.31 800x600 31.469 70.08 48.077 72.18 720x400 37.927 85.03 46.875 75.00 31.469 59.94 53.674 85.06 35.000 66.66 832x624 49.725 74.55 37.861 72.80 48.363 60.00 640x480 37.500 75.00 1024x768 56.476 70.06 43.269 85.00 60.023 75.02 31.500 60.00 54.348 60.05 848x4
Resumen del contenido incluido en la página 15
Operation Operation Operation Turning on the Monitor Turning on the Monitor Turning on the Monitor just after installation 1. Connect power cord correctly. 2. Press the ON/OFF button on the Monitor. At this moment, the Monitor is switched to standby mode. Press the INPUT SELECT button on the Monitor or press the POWER, INPUT SELECT, MULTIMEDIA button on the remote control to switch the Monitor on. Turning on the Monitor (power cord is still connected) 1. If the Monitor was turned off with t
Resumen del contenido incluido en la página 16
Operation Picture Menu Options Picture Menu Options - Each adjustment for the Picture menu options doesn’t effect other input sources. Readjust Picture menu options for each of the following sources. • RGB (PC) / DVI (PC), • RGB (DTV) / DVI (DTV) / Component (480p, 720p, 1080i) • Video / S-Video / Component (480i) APC (Auto Picture Control) APC (Auto Picture Control) - APC adjusts the Monitor for the best picture appearance. - When adjusting picture options (contrast, brightness, color, sharpne
Resumen del contenido incluido en la página 17
Operation Sound Menu Options Sound Menu Options DASP (Digital Auto Sound Processing) DASP (Digital Auto Sound Processing) - This function lets you enjoy the best sound without any special adjustment because the Monitor has the appropriate sound option based on the program content. - When adjusting sound options (treble, bass, and balance) manually, DASP automatically changes to User. 1. Press the DASP button repeatedly to select the appropriate sound setup as shown below. Flat Music Movie Sports
Resumen del contenido incluido en la página 18
Operation Timer Menu Options Timer Menu Options Clock Setup Clock Setup - If current time setting is erased by a power failure, if TV is unplugged or if the monitor is turned off with the ON/OFF button on the monitor, reset the clock. 1. Press the MENU button and then use button to select the TIMER menu. D / E TIMER TIMER 2. Press the G button and then use button to select Clock. Clock G - - : - - D / E Off timer 3. Press the G button and then use button to set the hour. D / E On tim
Resumen del contenido incluido en la página 19
Special Menu Options Special Menu Options Key Lock Key Lock - The monitor can be set up so that it can only be used with the remote control. - This feature can be used to prevent unauthorized viewing by disabling the front panel controls. - This Monitor is programmed to remember which option it was last set to even if you turn the monitor off. 1. Press the MENU button and then use button to select the SPECIAL menu. D / E SPECIAL SPECIAL 2. Press the G button and then use button to select Key lo
Resumen del contenido incluido en la página 20
Operation Special Menu Options continued Special Menu Options continued Menu Rotation for Vertical Viewing (MU-42PZ44M/44V/90M/90V series models only) Menu Rotation for Vertical Viewing (MU-42PZ44M/44V/90M/90V series models only) 1. Press the MENU button and then use button to select the SPECIAL menu. SPECIAL D / E SPECIAL Language 2. Press the G button and then use button to select OSD (On Screen Display) D / E Key lock Rotate. ISM Method Low power 3. Press the G button and then use D / E butt
