Resumen del contenido incluido en la página 1
GM-F520S
GM-F470S
INSTRUCTIONS
GM-F420S
� Be sure to read through “Safety Precautions” (pages 2 and 3)
before using the unit.
LCD DISPLAY MONITOR
Table of Contents
Safety Precautions .............................................. 2
IMPORTANT SAFEGUARDS ...........................2
Maintenance .....................................................3
Installation ............................................................ 4
Parts Identification .............................................. 5
Co
Resumen del contenido incluido en la página 2
2 Safety Precautions � Before connecting other products such as VCR’s and personal computers, you should turn off the power The lightning flash with arrowhead of this product for protection against electric shock. symbol, within an equilateral triangle is CAUTION � Do not use attachments not recommended by the manufacturer as they may be hazardous. intended to alert the user to the presence of uninsulated “dangerous voltage” � When replacement parts are required, be sure the service technici
Resumen del contenido incluido en la página 3
U.S.A. only European Union only Maintenance FCC NOTICE (U.S.A. only) Dear Customer, Unplug this product from the wall outlet before CAUTION: Changes or modifications not approved cleaning. by JVC could void the user’s authority to operate This apparatus is in conformance with the valid European directives and standards regarding electromagnetic the equipment. compatibility and electrical safety. NOTE: This equipment has been tested and Screen European representative of Victor Company of J
Resumen del contenido incluido en la página 4
4 Installation Position of the internal cooling fans Fan A (only on GM-F520S) � Fan A stops when you set the speed of the fans to Precautions “LOW” (see “COOLING MODE” on page 16). � When installing the monitor on the wall, consult your dealer. � Fan B is always in operation while the power is on. Fan B � Route the power cord and connection cables along the floor corners to avoid walking on them. Fan A � For good heat dissipation, try to leave the following distance of space (minimum) around th
Resumen del contenido incluido en la página 5
Parts Identification � See page 28 for checking the accessory included with the monitor. 1 POWER ON button Remote control Turns on the monitor. 2 POWER OFF button Monitor Front panel Turns off the monitor (on standby). 1 3 INPUT SELECT buttons (see page 10) 1 Remote sensor Select the input. 1 2 3 Aim the remote control toward the sensor. 2 4 Number buttons 2 Self-diagnostic lamps (see page 27) 5 MENU/EXIT button (see page 12) Light or flash when a malfunction occurs on the 3 � Displays the
Resumen del contenido incluido en la página 6
6 Connections To bind the cables (example): Select the most appropriate terminal referring to the illustration below and the tables on page 7 when connecting equipment to the terminals - . A J Insert the end of the cramp CAUTION into the hole pointed with 3. � Before making any connections, turn off all the equipment. � DO NOT connect the power cord until all connections are completed. � Refer also to the user manual of each piece of equipment. � Do not short-circuit 9 and ( speaker cords to
Resumen del contenido incluido en la página 7
� See page 8 and 9 for the available signal formats and the pin assignment of the DVI-D and D-sub 15-pin terminals. Video input terminals Output terminals on external Input terminals on the monitor Connecting cables Notes equipment DVI-D Compatible with HDCP. When the picture is not displayed correctly, change the setting of ADVI DVI cable DVI output “DVI MODE” (see page 13). (HDCP) IN B RGB RGB IN D-sub 15-pin cable RGB output Since the IN terminal and OUT terminal are loop-through terminals
Resumen del contenido incluido en la página 8
8 Connections (cont.) Available signals The following signals can be input to this monitor. √ : Acceptable / —: Not acceptable Video signals Frequency Input terminal Signal name Notes Horizontal (kHz) Vertical (Hz) VIDEO RGB DVI-D NTSC 3.58 15.734 59.94 √ —— PAL-M 15.734 59.94 √ —— PAL 15.625 50.00 √ —— PAL-N 15.625 50.00 √ —— √ SECAM 15.625 50.00 —— BW/60 15.734 59.94 √ —— BW/50 15.625 50.00 √ —— 480/60i 15.734 59.94 — √ — 576/50i 15.625 50.00 — √ — 480/60i (pixel repetition) 15.734 59.94 — — %
Resumen del contenido incluido en la página 9
Computer signals � When analog RGB signals are input, part of the picture may not be displayed or an unnecessary picture may appear in the following cases. If this happens, apply “AUTO ADJUST” or adjust “SIZE” and “POSITION” in the “SIZE SETTING” menu (see page 13). – When a signal other than those listed below is input – When the horizontal/vertical frequency of the signal is different though its resolution is the same as that of the signals listed below – When the resolution of the signal out
Resumen del contenido incluido en la página 10
10 Daily Operations On the top of � When the Control Lock is set to “ON” (see page 16), you cannot use the buttons on the main Turning on the main power the rear panel unit. | : Main power on � When the Security Lock is set to “ON” (see page 17), a password entry screen of the ‡: Main power off set-up menu appears at turning on the power. Enter the correct password before starting operations. On the bottom of the rear panel Changing the aspect ratio Each time you press the button, the aspect
Resumen del contenido incluido en la página 11
Displaying the current status Controlling only the monitor with The information of the current input is displayed. specified ID When using several monitors at once, you can control only a Current input desired monitor by specifying its ID. DVI � To assign the ID, see “ID” on page 15. Input signal format 1400 x 1050A 60Hz To select the ID of the monitor to control NOTE 1 Press ID ON. � When no signal is input, “NO SYNC” appears. When a signal this monitor does not ID of each monitor is displa
Resumen del contenido incluido en la página 12
12 Menu Operation On the main menu and set-up menu, you can make various adjustments, such as picture quality. 2 Select an item by pressing 5 ∞ , then press 3. � For the configuration of the main menu and a detailed description of each item, see page 13. The sub menu appears. � For the configuration of the set-up menu and a detailed description of each item, see page 15. Ex.: When “PICTURE SETTING” in the main menu is selected � Functions not available for the current input signal cannot be sele
Resumen del contenido incluido en la página 13
Menu Configuration—MAIN MENU PICTURE SETTING SIGNAL SETTING Item To do Setting value Item To do Setting value PICTURE MODE Select a picture mode (see “Selecting the picture mode” DYNAMIC, NORMAL, USER DVI MODE When “AUTO” is selected, the format of signals come AUTO, VIDEO, PC on page 11). in to the DVI-D (HDCP) terminal is automatically recognized. (Normally, select “AUTO.”) CONTRAST Adjust contrast of the picture. –20 += 00 += +20 � Select “VIDEO” or “PC” when the picture is not BRIGHT Adjus
Resumen del contenido incluido en la página 14
14 Menu Configuration—MAIN MENU (cont.) FUNCTION SETTING Item To do Setting value DUAL DISPLAY Set the Dual Display (see “Activating the Dual Display” on page 11). Item To do Setting value MODE Select the Dual Display mode. OFF, PIP, PBP COLOR SYSTEM Select the color system. When you cannot view pictures AUTO, NTSC, PAL, correctly with “AUTO,” select an appropriate option according SECAM, PAL M, MAIN WINDOW Select the input for the main window. VIDEO, RGB, DVI to the current input. PAL N SUB.
Resumen del contenido incluido en la página 15
Menu Configuration—SET-UP MENU INFORMATION COLOR TEMP. Item To do Setting value Item To do Setting value STATUS DISPLAY Set if you want the information of the current input to AUTO, OFF COLOR TEMP. Display the color temperature. be displayed on the screen (see “Displaying the current status” on page 11). R DRIVE, G DRIVE, Adjust the drive level of each color (red, green, and blue). MIN += 000 += MAX B DRIVE (in 256 grades) SUB HOUR METER Display the hours of current use (unit: hour). You can r
Resumen del contenido incluido en la página 16
16 Menu Configuration—SET-UP MENU (cont.) SCHEDULER POWER ON DELAY Sets the time till the power supply to the monitor’s circuits starts after the power button (POWER ON button Item To do Setting value on the remote control or button on the main unit) is pressed. PRESENT TIME Adjust the clock. If you are going to turn several monitors on at the same time, it is recommended to apply different values to � For the setting procedure, see page 17. the monitors to control rush current. PROGRAM SET S
Resumen del contenido incluido en la página 17
Setting the Security Lock Using the timer When the Security Lock is set to “ON”, a password entry screen of the set-up menu appears at at turning on Setting the clock 2 Press 3. the power. Enter the correct password before starting operations. Set the clock before using the Power-on/off Timer � Without entering the correct password, you cannot perform any operations except for entering the password Day √ : Activated / (blank): Deactivated (see below). and turning off the monitor. PROGRAM SET
Resumen del contenido incluido en la página 18
18 Using the Motion Sensor Outline of the motion sensor Installation and connection By connecting the supplied motion sensor, you can set the monitor to perform the specified operation when The motion sensor can be attached to either of 24 screw holes on the main unit (5 screw holes on the top and the sensor detects the motion of human around the monitor. The status of the monitor returns automatically to bottom, and 7 on the right and left side). Choose an appropriate position according to the
Resumen del contenido incluido en la página 19
NOTE Setting � While the function is controlled by the motion sensor, only the external control by the MAKE system can Make the settings for the motion sensor on “MOTION SENSOR” of the main menu. control that function. You cannot use other external control and the buttons on the remote control and the � For the menu operation procedure, see page 12. monitor. � The status of the monitor returns automatically to that before detecting human as the time set on “SUSTAIN TIME” passed wi
Resumen del contenido incluido en la página 20
20 How to Use External Control About the external control Control signals from the remote control of external equipment are sent out to the equipment through the RS- This monitor has the following external control terminals: 485 OUT terminal. Consult your dealer for details. � RS-232C terminal: Controls the monitor by external control equipment (a personal computer or a dedicated � You cannot use the IR OUT system and the serial communication via the RS-485 terminal at the same t
