Manual de instrucciones de Honda Automobiles Bed Extender 4N23032K

Resumen del contenido incluido en la página 1

Bed Extender User’s Information
© 2005 American Honda Motor Co., Inc. - All Rights Reserved. 1
RIDGELINE

Resumen del contenido incluido en la página 2

Introduction Thank you for purchasing this Honda accessory. Please read this user’s information carefully before using the bed extender, and keep this information in the glove box for future reference. This product is designed to be used exclusively on a Honda Ridgeline. Honda is not responsible if the product is used for anything other than its intended purpose. This user’s information should be considered a permanent part of the vehicle. It should remain with the vehicle at all times and stay

Resumen del contenido incluido en la página 3

Bed Extender Arrangement Installation with the Tailgate Opened Flat Installation in the Forward Position NOTICE LABEL NOTICE LABEL 4N23032K 4N23011K ADVICE To avoid damage to the tailgate or the bed Installation with the Tailgate Closed extender: Rotate the bed extender forward. Do not exceed 300 lbs (136 kg) on tailgate. Close the tailgate. Be sure extender is properly installed before NOTICE driving. LABEL Do not secure cargo to the tailgate or the extender. INFORMATION Install the bed e

Resumen del contenido incluido en la página 4

Installation Installing the Bed Extender Vertically: Open the tailgate. Insert the right and left Rotate the bed extender backward. Snap the projections from the bed extender into the right straps attached to the bed extender to the and left latches. snaps. BED EXTENDER PROJECTION SNAP RIGHT LATCH SNAP SNAP LEFT LATCH BED EXTENDER 4N23040K PROJECTION TAILGATE 4N23900K SNAP 4 © 2005 American Honda Motor Co., Inc. - All Rights Reserved.  

Resumen del contenido incluido en la página 5

Installation Installing the Bed Extender Installing the Bed Extender Horizontally: in the Forward Position Insert the right and left Snap the straps attached to the Wind each strap onto a bar of projections from the bed bed extender to the snap. the bed extender and secure extender into the right and left the straps as shown. latches. Push down the bed Insert the right and left extender until the engaged projections from the bed parts lock. extender into the right and left SNAP latches on the f

Resumen del contenido incluido en la página 6

Removal Removing the Bed Extender Vertically: Unsnap the straps and rotate the bed extender Pull the bed extender up to remove. Close the upward. tailgate. BED EXTENDER BED EXTENDER STRAP STRAP 4N23101K 4N23111K 6 © 2005 American Honda Motor Co., Inc. - All Rights Reserved.  

Resumen del contenido incluido en la página 7

Removal Removing the Bed Extender Horizontally: Removing the Bed Extender from the Forward Position Unsnap the straps. Unlock the right and left latches by pulling the lever toward you and Unlock the right and left latches by pulling the remove the bed extender by pulling it up straight. lever toward you then remove the bed extender by pulling it up straight. Close the tailgate. LEFT/RIGHT LEFT/RIGHT LATCH LATCH LEVER Pull the lever LEVER toward you to Pull the lever unlock. toward you to unloc

Resumen del contenido incluido en la página 8

8 08L26-SJC-1000-81 © 2005 American Honda Motor Co., Inc - All Rights Reserved. © 2005 American Honda Motor Co., Inc. - All Rights Reser Printed in Japan ved.