Resumen del contenido incluido en la página 1
ENGLISH
WIDE LCD PANEL TV
Contents
INSTRUCTIONS
PREPARATION
Safety precautions ............................... 2
Remote control buttons and functions ... 3
Set up and connections ....................... 4
Initial settings ....................................... 6
Registering / Editing channels ............. 6
FUNCTIONS
Picture setting ...................................... 7
Sound setting ...................................... 9
Useful functions ................................. 10
Viewing Tele
Resumen del contenido incluido en la página 2
Thank you for buying this JVC LCD panel television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. • Follow this manual • Do not allow the TV to fall! • Never place anything on the TV! - Do not rest your elbows on, or allow regarding setup! - Placing liquid, naked fl ames, cloths, paper, etc. on the TV children to hang from the TV. - Connect only to a 110-240 V, may cause a fi re. 50/60Hz AC outlet. - There is a risk that the TV will
Resumen del contenido incluido en la página 3
Remote control buttons and functions Turn the TV on from standby “AAA/R03” Batteries • Insert the batteries Use two “AAA/R03” dry cell batteries. Insert the Display on-screen menu batteries from the · end, making sure the · and ª polarities are correct. Operate the menu WARNING: To previous screen If this symbol is shown, Batteries shall not be exposed it is only valid in the Turn on “Clear SD” to excessive heat such as direct European Union. sunshine, fi re or the like. Colour
Resumen del contenido incluido en la página 4
Set up and connections Connect an aerial and VCR / DVD Player Switch between TV / VIDEO TV/VIDEO AERIAL devices MENU/OK Display on-screen menu / set CHANNEL Change channel / Page / Hyper Scan Function (P. 3) Power lamp VOLUME Volume / Adjust ON : Lit (Blue) OFF : Unlit Power On / Off Power lamp lights while the TV is on. To Headphone (P. 5) • “Power Lamp” (P. 11) Remote control sensor / Eco Sensor OR Care when setting ■ Power requirements • Connect the power cord only t
Resumen del contenido incluido en la página 5
Set up and connections (continued) You can connect many different devices to the rear panel of the TV. VIDEO-1 Watching videos Please read the user manuals of each device before setup. Output Input (Connecting cables are not supplied with this TV.) TM HDMI Connector. • Composite signal / Component signal (P. 16) • Sound L / R • Use Component signal Headphones HDMI-1 HDMI-2 HDMI-3 “Video - 1 Setting” (P. 12) DIGITAL VIDEO/AUDIO VIDEO-2 Watching videos To “HDMI-1” To “HDMI-3” Output Input •
Resumen del contenido incluido en la página 6
Initial Settings Registering / Editing channels You can edit the channel list or register new channel manually. Display the Select Select Turn on the TV 1 menu bar “Set Up” “Edit / Manual” • Show only when powering on 1. Select 1. Select Select a for the fi rst time. channel • The power on the unit can also be used. 2. Next 2. Next JV
Resumen del contenido incluido en la página 7
Picture setting 1. Display “Picture” menu 2. Select item or setting • To enter an items menu 1. Select 1. Select 1. Select 2. Adjust 3. Finish 2. Enter 2. Enter You can select a preset picture setting according to your favour. Bright : Hightens contrast and sharpness. Game Mode : Adjusts picture setting when play the game. Picture Mode Soft : Softens contrast and sharpness. Standard : Standardizes picture adjustment. You can change the backlight brightness. Backlight Darker
Resumen del contenido incluido en la página 8
Picture setting (continued) Finer picture adjustment : For clearly picture (Off / Mode-1 / Mode-2) Clear SD When Clear SD set to Mode-1 or Mode-2, then Digital VNR, DigiPure, Picture Management and MPEG Noise Reduction cannot be operated. Digital VNR : Reduces the amount of noise in original picture. (Off / On) DigiPure : For natural - looking outlines (Off / On) : For smooth cinema fi lm (Auto / Off / On) Pull Down Features : For natural - looking pic
Resumen del contenido incluido en la página 9
Sound setting 1. Display “Sound” menu. 2. Select item or setting Sound 1. Select 1. Select ■ Stereo/I II III Mono Sound Meister Off Treble 2. Adjust Bass Surround 3. Finish Balance 2. Enter Voice Enhancer Off Al Volume Off ■ Stereo/I II Selects the broadcast sound stereo, mono or bilingual language (u: Mono / m : Stereo / I : SUB1 / II : SUB2 / Mono) Sound Meister Sets sound theme to match your listening source (Off / Dynamic / Pure / Living) Treble Compensates high frequencies to wid
Resumen del contenido incluido en la página 10
> Useful functions 1. Display “Features” menu. 2. Select item or setting • To enter an items menu 1. Select 1. Select 1. Select 2. Adjust 3. Finish 2. Enter 2. Enter 1. Select PR channel that you want to watch. 2. Set the On time to your desired period of time. On Timer Select PR channel TV to turn on automatically from 3. Set standby mode at 1. Select “On a set channel and 2. Set time, maximum Timer” (Blue) time
Resumen del contenido incluido en la página 11
Useful functions (continued) Blue Back Displays a blue screen and mute the sound when the signal is weak or absent. (On / Off) Child Lock Disables the side control buttons of the TV. (On / Off) Auto Shutoff Sets the power to turn off if no TV signal (RF) is received and no operation is performed for about 15 minutes. (On / Off) Deletes the favourite channel that you registered. (Blue) 1. Select Favourite Setting To delete Power Lamp Sets power lamp lighting
Resumen del contenido incluido en la página 12
V iewing Teletext W atching Video or DVDs Select the input Source. This TV can display TV broadcasts and Teletext on the same channel in Note: TV/VIDEO 1. Select two windows. button select the video source by 1. move down or use button 0-6 for 2. Set selection. When watching TV TV TEXT TEXT • Operate the connected device and play video. 1. Select “Set Up” 1. Select 2. Enter 2. Select item 1. Select item 2. Select a Teletext page by pressi
Resumen del contenido incluido en la página 13
Confi guring your remote control You can confi gure your TV’s remote control to Note operate your other devices. • If your device does not respond, try all the available codes for the Confi gure your remote control. device’s brand. 1. Turn on the device manually. • If none of the code works, or the brand is not listed, refer to “Using the 2. Switch the remote control mode that matches search code function” (P. 14). your device. Refer to the table on the right to select an appropriate mode. M
Resumen del contenido incluido en la página 14
Button functions Using the search code function This function searches through the codes one by one, beginning from ■ Change the remote control mode the fi rst code in the list. 1. Turn on the device manually. 2. Switch the remote control mode that matches your device. Press to select the mode. ■ Turn on/off the device 3. Activate the search code function. Hold down and until the mode indicator blinks. ■ Navigate the menus Select Display menu 4. Point the remote control at your device and
Resumen del contenido incluido en la página 15
Troubleshooting If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair. Severe noise or snow Page Poor picture quality Page Unnatural colour >> Adjust “Colour” and “Backlight” P. 7 Check the aerial cable and TV connections . P. 4 Check “Colour System”. If “Auto” is selected P. 8 Check the direction of the aerial. P. 4 select the specifi c colour system manually. Check the aerial or its cable damaged or not. -- Noise >> Set to the fol
Resumen del contenido incluido en la página 16
Technical information Language group for Teletext PC Signals that can be displayed • If the signal doesn’t appear, check that the vertical frequency on the Group Languages PC is set to “60Hz”. Group-1 Turkish, Hungarian, English, German, French, Italian, Spanish, Portuguese, Greek, Swedish, Finnish Group-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian, Hungarian, Resolution 640 x 480(VGA) / 1024 x 768(XGA) German, French, Italian, Swedish, Finnish Group-3 Russian, Bulgarian,
Resumen del contenido incluido en la página 17
Technical information (continued) What is “Full Native”? What is “Eco Sensor”? • With the full HD LCD display and “Full Native”, you can enjoy full native You can adjust this TV so that the screen automatically adjusts to the HD resolution of 1920 x 1080. It exposes fl aws in the video that were optimum contrast of light and dark according to the brightness of your hidden when viewing on “Full”. room. This function reduces eyestrain and the power consumption of this TV. • Set “Eco Sensor” (P.
Resumen del contenido incluido en la página 18
CH / CC List To use the Insert function (P. 6), fi nd the “CH/CC” number corresponding to the TV’s channel number from this table. US: The US channel numbers are the channel numbers used in the United States, Philippines, etc. CCIR: The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc. OIRT: The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc. AUSTRALIA: The AUSTRALIA channel numbers are the channel numbers used i
Resumen del contenido incluido en la página 19
Specifi cation Main unit Terminals / Connectors Model LT-42Z49 LT-32Z49 Terminal name Terminal type Signal type (IN) Signal type (OUT) Broadcasting systems B / G / I / D / K / M Composite video, Analogue component 576i (625i) / 480i Colour systems PAL, SECAM, NTSC 3.58 / NTSC 4.43 MHz (525i), Channels and frequencies VHF low channel (VL) = 46.25 to 140.25 MHz Progressive : 576p (625p) / VIDEO-1 RCA connectors x 6 VHF high channel (VL) = 147.25 to 423.25 MHz 480p (525p), UHF channel (U) = 431.2
Resumen del contenido incluido en la página 20
© 2009 Victor Company of Japan, Limited 0509GLT-NF-MT G GGT0312-002A-H-EN.indd 20 GT0312-002A-H-EN.indd 20 6 6/1/09 10:05:03 AM /1/09 10:05:03 AM
