Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
Notice Copyright (Copyright © 2006 HUMAX Corporation) Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing except approval of ownership of copyright and copyright law. ** Warranty This warranty does not cover parts which may become defective due to misuse of the information contained in this manual. ** Trademarks VIACCESS™ is a trademark of France Telecom. CryptoWorks™ is a trademark of Philips Electronics N.V. Irdeto is a trademark of Mindport BV. Nagra
Resumen del contenido incluido en la página 3
Notice Read this manual carefully and make sure you understand the instructions provided. For your safety, be aware of the following precautions. ** Warnings, Cautions and Notes Throughout the whole manual, pay special attention to the following marks that indicate hazardous situations. ** � Warning ** Indicates a hazardous situation which could result in serious injury. ** � Caution ** Indicates a situation which could damage the equipment or other apparatus. ** � Note ** Indicates additional i
Resumen del contenido incluido en la página 4
Safety and Warning This product has been manufactured to comply with international safety standards. Please read the following safety precautions carefully. ** Safety Instructions and Precautions ** 1. MAINS SUPPLY ** 90 - 250V AC 50/60Hz Operate this product only from the type of power supply indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your local power company. Disconnect the product from the mains before you start any maintenance or i
Resumen del contenido incluido en la página 5
Safety and Warning 11.LIGHTNING, STORM, or NOT IN USE ** Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-surges. ** 12.EXTRANEOUS OBJECTS ** Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts ** 13.REPLACEMENT of PARTS ** When replacement of parts is required, be su
Resumen del contenido incluido en la página 6
Contents 1. Before Using the Product ............................................................... 7 1.1 Package Contents ............................................................... 7 1.2 Front Panel ..................................................................... 8 1.3 Conditional Access............................................................... 9 1.4 Rear Panel...................................................................... 10 1.5 Remote Control............................
Resumen del contenido incluido en la página 7
Contents 9. Edit Channels.......................................................................... 49 9.1 Edit Channels ................................................................... 49 9.2 Edit Favourite List................................................................ 52 10. Installation............................................................................ 55 10.1 Search Channels ............................................................... 55 10.2 SMATV Search................
Resumen del contenido incluido en la página 8
1. Before Using the Product 1. Before Using the Product This chapter provides detailed instructions on the product and its accessories. 1.1 Package Contents Please check all package contents before using your product. ** ** Remote Control SCART-Cable ** User's Manual HDMI-Cable Batteries ** Note: � Defaults may occur if the remote control is left without battery for a long time. Always keep the battery inserted in the remote control. � Package contents may vary according to area. GB 7
Resumen del contenido incluido en la página 9
1. Before Using the Product 1.2 Front Panel ** ** 1. STANDBY BUTTON ** Switches between operation and standby modes. 2. TV/RADIO BUTTON ** Switches between TV and radio modes. 3. P-/P + BUTTON ** Moves the TV/radio channel up or down. 4. VOL-/VOL+ BUTTON ** Adjusts the audio volume. 5. VIDEO FORMAT ** Changes the resolution of video. 6. CI-MODULE SLOT ** A slot for two CI modules with a Smartcard. GB 8
Resumen del contenido incluido en la página 10
1.3 Conditional Access 1. Inserting a CI (with Smartcard) A CI module looks like a PC map (PCMCIA) for laptops. There are different kinds of CI Modules, suitable for different coding systems; Irdeto, Conax and more. Additionally to the CI module, a Smartcard is needed to decode the channels. 1. Open the right-hand flap on the front of the product. 2. Follow the instructions of the module and insert the Smartcard into the CI module. 3. Keep the CI module (with the Smartcard) horizontal. 4. Insert
Resumen del contenido incluido en la página 11
1. Before Using the Product 1.4 Rear Panel ** 1. LNB IN ** Connects to the satellite antenna cable. ** 2. LNB OUT ** Connects to another digital receiver. ** 3. USB Host ** Connects to a USB cable. 4. TV SCART ** Connects to a TV SCART cable. 5. VCR SCART ** Connects to a VCR SCART cable. 6. AUDIO L/R ** Connects to the TV or VCR and outputs audio signals. 7. VIDEO ** Connects to the TV or VCR and outputs video signals. (using RCA and component connector) 8. HDMI ** Connects to the TV using HDMI
Resumen del contenido incluido en la página 12
1.5 Remote Control ** GB 11
Resumen del contenido incluido en la página 13
1. Before Using the Product 1. SOURCE 12.WIDE ** ** Controls the input of TV. Sets the Display Format. ** ** 2. TV/RADIO 13.STANDBY ** ** Switches between TV and radio. Switches between operation and standby ** modes. ** 3. NUMERIC(0-9) BUTTONS ** 14.OPT+ (OPTION) Enters a TV/radio channel number or ** menu option number. Displays the audio, Teletext and subtitle language services. 4. EPG ** ** Displays the EPG. 15.LAST ** ** Returns to the previous channel. 5. BACK ** 16.OK Closes and returns t
Resumen del contenido incluido en la página 14
2. Setup 2. Setup This chapter describes how to connect your product to the TV with the particular equipments for gaining optimum signal quality. The product provides various interfaces to connect to the TV, VCR or other devices. Select the most appropriate procedure depending on the equipment you have. ** Note: If you encounter any problems setting up your product, please contact your local product distributor. 2.1 Using HDMI Connector The HDMI connection is recommended for Digital TV. In case
Resumen del contenido incluido en la página 15
2. Setup 2.2 Using DVI Connector The DVI connection using a HDMI to DVI converter is recommended for Digital TV. In case the TV has a DVI input connector, connect the product to the TV with the HDMI cable using a HDMI to DVI converter as follows. 1. When equipped with an A/V receiver ** GB 14
Resumen del contenido incluido en la página 16
2. When there is no A/V receiver available In case you are not equipped with an A/V receiver, connect the product to the TV using the audio cable as follows. ** Note: You can also connect the product to the audio input jack of your TV set using the 3.5 Stereo Jack Cable to 2 RCA Y Cable. GB 15
Resumen del contenido incluido en la página 17
2. Setup 2.3 Using Component Cable The Component connection is recommended for Digital TV. Connect the product to the TV with the Component cable as follows. ** GB 16
Resumen del contenido incluido en la página 18
2.4 Using SCART Cable The SCART cable connection is recommended for Analog TV or VCR. Connect the product to the TV with the SCART cable as follows. ** ** Note: Connecting your TV directly to the Audio/Video output of the product will assure a more vivid picture and enhance your viewing enjoyment. GB 17
Resumen del contenido incluido en la página 19
2. Setup 2.5 Powering On 1. Connect the power cord of the product to a wall outlet. 2. Turn on the power switch located at the left side on the back of the product. ** 3. Power on by pressing the STANDBY button of the remote control or the STANDBY button at the front of the product. GB 18
Resumen del contenido incluido en la página 20
3. Installation Wizard 3. Installation Wizard When powering on your product for the first time after purchase, the installation wizard will operate automatically. This chapter includes the first time setup of the language, time, search channel and software update which will show you how to start the initial installation. ** Note: � The default password is 0000. � If you have forgotten your password, please contact your local product distributor. 3.1 Language Language allows you to select the mai
