Resumen del contenido incluido en la página 1
Harsper R&D
RS-232C (NTSC) Manual
MODEL : LCD TV
Ver 3.0
2005. 04. 20
R&D Center
Harsper Co., Ltd.
- 1 -
Resumen del contenido incluido en la página 2
Harsper R&D < Control LCD & PDP through Serial Port > 2005. 4. 20. 1. How to connect external equipment - Connect the serial port of external equipment to the RS-232C jack of the monitor back panel. - RS-232C cables not included with the Monitor. - The remote control and LCD&PDP front panel buttons (except main power) doesn’t operate when controlling LCD&PDP set by PC. Com2 Com1 RS-232C Cable RS-232C DVI INPUT AUDIO INPUT RGB PC INPUT - Type of connector : D-Sub 9-Pin female to fema
Resumen del contenido incluido en la página 3
2. Run ‘Hyper Terminal’ (Example)
Resumen del contenido incluido en la página 4
3. Enter any name 4. Select COM Port
Resumen del contenido incluido en la página 5
5. Set the port properties Caution : You don’t check the box If you check the box, TV doesn’t work correctly. 6. Set the ASCⅡ Setup
Resumen del contenido incluido en la página 6
< Control TV through Serial Port> Communication Conditions Baud Rate 9600bps Data Length 8 Byte Parity Byte None Stop Byte 1 Byte Flow None 2. Communication Procedure - The response to cope with him must be in all order to a "Command --- > Response." basic 1) Command Format Eight ASCII Codes + CR C1 C2 C3 S1 S2 I1 I2 CR Command (3 Byte) Set_ID (2 byte) Input (2 Byte) 2) Response Format Eight ASCII Codes + CR S1 S2 C1 C2 C3 R1 R2 CR Set_ID (2 byte) Command (3 Byte) Response (2 Byte)
Resumen del contenido incluido en la página 7
Ex. When the Set_ID wants lighting 1st person TV > mpo0101 > 01mpo01 Command : " mpo0101" (mpo : Power / 01 : Set_ID / 01 : Power On) Response : " 01mpo01" ( The Set_ID lights 01st person LCD&PDP) When the Set_ID wants knowing the Power condition of 3rd person TV > mpo03ff > 03mpo01 Command : " mpo03ff" (mpo : Power / 03 : Set_ID / ff : Present situation question) Response : " 03mpo01" ( Status : Power On) When the TV with 12th Set_ID wants Volume 34 > svo1234 > 12svo34 Command : " svo1234" (
Resumen del contenido incluido en la página 8
Command SET ID INPUT Command Table C1 C2 C3 S1 S2 I1 I2 EX) P C T 0 1 0 0 Picture Control Item Command Set ID Input Remark TV *00 00 AV 1 00 01 *Set ID=00 send same AV 2 00 02 command to all TV on S-Video /AV3 00 03 Source data chain. For individual ps s Select TV control set ID = (01~99) Component 1 00 04 to match TV ID number Component 2 00 05 in advanced menu PC 00 06 DVI 00 07 Standard 00 *00 *Repeat command Picture Vivid 00 01 "ppm0000" to scroll pp m mode Mild 00 02 through sele
Resumen del contenido incluido en la página 9
Picture Control Item Command Input Input Remark TV 00 00 AV1 00 01 AV 2 00 02 S-Video /AV3 00 03 PIP Source pp s Component 1 00 04 Component 2 00 05 PC 00 06 DVI 00 07 Right Down 00 *00 *Repeat command Right UP 00 01 PIP Position ppp "ppp0000" to scroll Left UP 00 02 through selections Left Down 00 03 PIP_Swap(Cross) pp x 00 00 00 00 Down Increment Geo_H Position pg h 00 01 Up Increment 00 00 Down Increment Geo_V Position pg v 00 01 Up Increment 00 00 Down Increment Geo_Phase pg p 00 01 Up Incre
Resumen del contenido incluido en la página 10
Sound Mono 00 00 Stereo 00 01 Language A 00 02 Direct Input - No scrolling MTS sm t input command needed Language B 00 03 Language AB 00 04 SAP 00 05 Volume 00 (0~99) sv o 00 00 Down Increment Balance sb a 00 01 Up Increment Miscellany (Setup) Control Item Command Input Input Remark OFF 00 00 Power mp o ON 00 01 OFF 00 00 Remote m rl Lock ON 00 01 OFF 00 *00 10 00 01 20 00 02 30 00 03 *Repeat command Sleep Time "mst0000" to scroll 60 ms t 00 04 through selections 90 00 05 120 00 06 150 00 07 18
Resumen del contenido incluido en la página 11
TV Control Item Command Input Input Remark 00 00 Fine Tune tf t 00 01 CH Up tp u 00 00 CH Down tp d 00 00 CH Number (0~99) 00 tp n (0~99) CH Number (100~127) 00 tp h (0~27) Pre .CH tp c 00 00 PIP SUB CH Up ts u 00 00 PIP SUB CH Down ts d 00 00 OFF 00 00 Digest t d i ON 00 01 AIR 00 00 Channel CATV 00 01 Type(NTSC) HRC 00 02 tc t IRC 00 03 Channel AIR 00 04 Type(PAL) CATV 00 05 Auto Scan ta s 00 00
