Resumen del contenido incluido en la página 1
PLASMA TV
OWNER`S MANUAL
MODELS: P42V6-A8K
P42V6-A8
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
Resumen del contenido incluido en la página 2
Warning WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside refer service to qualified service personnel. Safety of operators has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and mainten
Resumen del contenido incluido en la página 3
Important Safety Instructions Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. 1. Retain these Instructions ---the safety and operating instruc
Resumen del contenido incluido en la página 4
Important Safety Instructions a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have been fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require
Resumen del contenido incluido en la página 5
Table of Contents 1 Warning ........................................... Sound menu.............................................. 26 2 Important Safety Instructions.............. To choose sound modes .......................... 26 5 Buttons and interface location............ Balance................................................. 26 5 Front control panel.......................... Setting Five Equalizer sound .................. 27 Rear control panel........................... 6
Resumen del contenido incluido en la página 6
Buttons and interface location -This is a simplified representation of front panel. -Here shown may be somewhat different from your TV. Front control panel 1 2 MENU 3 VOL+ 4 VOL- CH+ 5 CH- TV/AV 6 7 1.Remote control signal receive window 2.Remote indicator: in red when standby mode 3.MENU: menu display 4.VOL+/VOL-: volume increase and decrease, menu reset and entry 5.CH+/CH- : program plus and minus, menu options 6.TV/AV: input source select 7.POWER : DC ON/OFF
Resumen del contenido incluido en la página 7
Buttons and interface location Rear Rear Control panel Control panel VGA IN COMPONENT IN DVI IN L R SWITCH S C ART2 S C A R T 1 ANT IN AUDIO OUT VGA AUDIO Pr/Cr Pb/Cb Y L-AUDIO-R HDMI/DVI VIDEO AUDIO AC-INPUT 1. AUDIO OUT: Connect to optional external speaker(s). 2.VGA IN(PC) Connect VGA analog cable from the PC to the VGA IN. Connect the audio cable from the PC to the VGA AUDIO IN. 3.COMPONENT IN Connect the component cables from the component output of t
Resumen del contenido incluido en la página 8
Remote controller Inserting Batteries 1.Slide open the 2.Load two AA alkaline 3.Replace the cover of the cover of the battery batteries in the compartment. battery compartment. compartment on the paying attention to the polarity back of the remote diagram in the battery controller. compartment.(plus and minus poles to respective mark) Precautions Make sure that two AA alkaline batteries As strong light may interfere the are loaded. The batteries must be of the signals, change
Resumen del contenido incluido en la página 9
Keys of remote controller - The remote controller cannot be operated unless the batteries are properly loaded. - When using the remote control, aim it at the remote control sensor on the TV. Function introduction STILL I/II (NICAM) Picture static PIP(the function is optional for the SLEEP country or area) Displaying sleep time, adjustable Power Off/Standby MUTE STILL any other programmed MUTE Switches the sound on or off equipment off. SLEEP PIP DISPLAY SCAN SCAN Program scan button DISPLAY D
Resumen del contenido incluido en la página 10
Remote controller Effective range above 20 20 below 45 45 right left front 8m MUTE STILL SCAN SLEEP PIP DISPLAY ABC@ DEF GHI$ JKL% MNO POR& STUV WXYZ TV/AV *#() SWAP P.STD S.STD CH+ VOL- MENU VOL+ CH- H.LOCK CH.LIST TIMER ZOOM EXIT Ensure the remote controller is pointed toward the remote controller window on the display. No obstacles should be placed between the remote controller and the remote controller window. The effective receiving scope for the signal is 8 meters to the front of
Resumen del contenido incluido en la página 11
External Equipment Connections Antenna Connection Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position are different. Mixer outdoor additional antenna purchase Antenna input 75 standard coaxial type SWITCH AC-INPUT AC power ANT IN socket 75 coaxial cable 300 twin-lead cable Plug Antenna adapter (additional purchase) Note * It is recommended that you'd b
Resumen del contenido incluido en la página 12
External Equipment Connection NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some ways to connect your TV. Choose the connection which is best for you. VCR connection - To avoid picture noise (interference), leave an adequate distance between the VCR And TV. 1. Connect the SCART cab
Resumen del contenido incluido en la página 13
External Equipment Connections DVD connection How to connect 1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the YUV IN jacks on the TV and connect the DVD audio outputs to the AUDIO IN jacks on the TV, as shown in the COMPONENT IN figure. 2. If your DVD only has an SCART output SCART2 SCART1 ANT IN Pr/Cr Pb/Cb Y L-AUDIO-R jack, connect this to the SCART input on the TV. as shown in the figure. NOTE: If your DVD player does not have component video output, use S-V
Resumen del contenido incluido en la página 14
External Equipment Connections PC connection How to connect or DVI source. 1. To get the best picture quality, adjust the PC 4. Check the image on your TV. There may be noise associated with the resolution, graphics card to ( 1024x768),60Hz. vertical pattern, contrast or brightness in 2. Use the TV`s VGA IN port for video PC mode. If noise is present, change the connections, depending on your PC connector. PC mode to another resolution, change If the graphic card on the PC does not o
Resumen del contenido incluido en la página 15
External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set. Note Prolonged use of headphones at a high volume SWITCH may damage your hearing. AC-INPUT ANT IN You will not receive sound from the speakers when you connect headphones to the system. Power source TO USE AC POWER SOURCE
Resumen del contenido incluido en la página 16
Set up your TV -There are several options you might need to set up in order for your TV to work properly. Read the instructions that follow. -In the manual, the OSD(on screen display) may be different from your TV`s, because it is just an example to help you with the TV operation. Switching ON/OFF the TV set 1 Please press down the power switch to switch on AC power supply and the power indicator will light . 2 If the indicator is lighting in red, press button on the remote controlle
Resumen del contenido incluido en la página 17
Select input modes Choose the input source If you hope to enjoy the picture from the external input source, before to select the source, you need to connect the devices, otherwise, when you select the source, the none or no signal will appears on the screen. MUTE STILL Source Press INPUT or TV/AV button on SLEEP PIP DISPLAY SCAN television or remote controller, ABC@ DEF the menu appears on the screen. GHI$ JKL% MNO Then press CH+/- to select the POR& STUV WXYZ TV item, and press VOL+ to
Resumen del contenido incluido en la página 18
Tuning menu This TV set has three methods to set channels, which are respectively full automatic, manual search fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. Full automatic search mode Automatic search 1 Press MENU button and then CH+/- button, the icon to TUNING menu. MUTE STILL 2 Press the VOL+/- buttons to enter submenu, and press SCAN SLEEP PIP DISPLAY CH+/- button to select "country"
Resumen del contenido incluido en la página 19
Tuning menu Program Table 1 Press MENU button and then CH+/- button, the icon to TUNING menu. 2 Press VOL+/- button to MENU enter submenu, and press MUTE STILL CH+/- button to select PICTURE Tuning Program AUDIO "Program Table", press Country England SCAN SLEEP PIP DISPLAY ADJUST VOL+ button to enter. Auto Search TUNING Program Table Or press CH.LIST button ABC@ DEF FUNCTION on remote controller. TIMER GHI$ JKL% MNO 3 Press CH+/- button to POR& STUV WXYZ select the edited channel, *#(
Resumen del contenido incluido en la página 20
Tuning menu Manual search If excessive channel signals of unwanted programs are received in local area, manual search function is recommended. 1 Press CH+/- buttons or the NUMBER 0-9 button to MUTE STILL choose desired searching frequency. (regard channel 18 as example). SCAN SLEEP PIP DISPLAY ABC@ DEF GHI$ JKL% MNO 2 After calling up the MENU POR& STUV WXYZ TUNING menu, press PICTURE CH+/- button *#() TV/AV SWAP Tuning Program AUDIO Country England to select "Tuning ADJUST Auto Sea
