Resumen del contenido incluido en la página 1
User's Manual
LCDTV
L19W661
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS TABLE OF CONTENTS …………………………….………………….. 1 FOR YOUR SAFETY …………………………………………………... 2 PRECAUTIONS AND REMINDERS ……………………………………3 IMPORTANT SAFETY INSTRUCTIONS …………………………….. 5 PREPARAT ION ………………………………………………………… 7 ATTACHING WALL MOUNTING ARM………………………...….......9 PERIPHERAL CONNECTION GUIDE ………………………………. 11 OPERATING INSTRUCTIONS ………………………………………. 12 TO USE THE FRONT PANEL CONTROL …………………….. 12 TO USE THE REMOTE CONTROL ……………………………. 13 TO USE THE MENUS ………………………………………….….….
Resumen del contenido incluido en la página 3
English FOR YOUR SAFETY Before operating the TV please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. T
Resumen del contenido incluido en la página 4
PRECAUTIONS AND REMINDERS Place unit on even surfaces. Don't place the TV in confined spaces or in a box when using it. Unplug immediately if is malfunction Unplug immediately if other foreign like no picture, no video/audio,smoke materials are put inside TV box or if and bad odor from TV. the TV fell down. Don't throw any object inside the TV box like metals or other flammable Prohibit/Avoid opening TV cabinet materials. 3 English
Resumen del contenido incluido en la página 5
English Remember to unplug the AC cord Avoid direct sunlight, dusty, high from the AC outlet before cleaning. Do humidity and smoky areas. not use liquid cleaners or aerosol cleaners to clean the display. Make sure to unplug the unit when not Call service personnel to clean the in use for a long period of time (days). internal part of the TV once a year. Do not cover or block any vents and Do not place the display near water, openings. Inadequate ventilation may such as bathtub, washbasin
Resumen del contenido incluido en la página 6
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce hea
Resumen del contenido incluido en la página 7
E n g l i s h 18. Tilt/Stability – All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design. Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet, which could ultimately overturn the product. Also,do not endanger yourself,or children,by placing electronic equipment/toys on the top of the cabinet.Such items could unsuspectingly fall from the
Resumen del contenido incluido en la página 8
PREPARATION Please, make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord! 1. Install the base stand; place the TV on a solid surface. Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water.
Resumen del contenido incluido en la página 9
English 3. Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V). 4. Power: Insert the power cord in the wall socket having an AC power supply. You can see LED states at the front panel. If the LED color is Green, means the TV set is power on. If the LED color is red , which means this TV set is in stand by state. 5. Turn on the TV: Push the POWER key on the Remote control or the control knobs on top of TV. The TV will be power-on a
Resumen del contenido incluido en la página 10
Attaching Wall Mounting Arm Preparing to Install An Optional Wall Mounting Arm: 1. Remove the lid on back cover 2. push the stand ahead until hear “ka ” This TV can be attached to a wall mounting arm you purchase separately (The height of WALL MOUNTING should be over 21mm). Disconnect power before this procedure. Follow these steps: 9 English
Resumen del contenido incluido en la página 11
English 1. Remove the attached backcover . 2. Follow the manufacturer's instructions to assemble the wall mounting arm. 3. Place the wall mounting arm onto the back of the TV. Line up the holes of the arm with the holes in the back of the TV. 4. Insert the 4 screws into the holes and tighten. Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for instructions on attaching it to the wall. 10
Resumen del contenido incluido en la página 12
2 11 English
Resumen del contenido incluido en la página 13
English OPERATION INSTRUCTIONS TO USE THE FRONT PANEL CONTROL Menu Power CH - : Press to select the next lower Program number. - CH + CH +: Press to select the next higher Program number. Power key: Press to turn on / off (standby) the TV set. Power (Press to turn on TV after the Power-ON status LED had changed to the Amber color and finished flashing.) Menu Menu key: Press to open or exit the OSD menu. VOL - : Press to decrease the sound volume level. - VOL + VOL +: P
Resumen del contenido incluido en la página 14
TO USE THE REMOTE CONTROL “MUTE” “POWER” Press to set TV sound mute ON/OFF. Press to power ON /OFF (standby) TV. “0 ~ 9 / - number” “Pre-CH” Power 1.Press to enter TV channel number to Press to display the previous TV. ne select chan l. 2.Press the passcode to active the “Source” factory mode. 1 2 3 1.Press repeatedly to select the input sources. 3.Press to active the factory mode. 2.The Source List should be activated and show “ .”(dot) 4 5 6 on OSD. Type the dot for digital channels. “DISP
Resumen del contenido incluido en la página 15
English TO USE THE MENUS Introduction When you use a menu or take an action, convenient instructions, help texts and messages will be displayed on your TV. Please, follow the displayed instructions and read the help text on the specific item highlighted. The color buttons perform different actions, when using on screen menu. By pressing the corresponding color button on the remote control to perform How to navigate through the Settings menus The Settings menu allows yo
Resumen del contenido incluido en la página 16
Note: Sometimes not all the menu items are visible on the screen. Use cursor down to scroll down to additional items. - Use the cursor right to enter the right panel. The content of the right panel is moved to the left panel and the right panel shows the content of the newly highlighted item in the left panel. Note: In some cases, you will want to watch the picture on your screen while adjusting settings. This means that when the highlight is on the right side panel, the other menu i
Resumen del contenido incluido en la página 17
English TV MENU-INSTALLATION Select the menu language 1.Press the MENU button on the remote control. 2.Use the cursor down to select Installation in the Settings menu. 3.Use the cursor right to enter the Installation menu. 4.Select Language and enter the list of available languages with the cursor right. (English / Spanish/ French) 5.Select your preferred language with the cursor up/down and press the OK button to confirm your selection. 6.Proceed with the Installation menu. S
Resumen del contenido incluido en la página 18
When Antenna is selected, the TV will detect antenna signals and will search for antenna TV (NTSC and ATSC) channels available in your local area. When Cable is selected, the TV will detect cable company supplied signals and will search for cable TV (NTSC, ATSC, QAM modulated) channels available in your area. Make sure that registration with your cable TV provider and connection of equipment are completed. 4.Select Start now with the cursor right key. 5.Press the OK button. 6.Pr
Resumen del contenido incluido en la página 19
English take longer than Analog to find and program. Please wait until you see the Auto Programming complete message. The TV will then switch automatically to the first channel found. Note: All channels must be unlocked in order to autoprogram. If requested, enter your PIN code to unlock all channels. (p.35 ) Notes: • When you have locked TV channels before initiating Autoprogram, a message appears asking to enter your PIN code in order to complete Autoprogramming. • When channel updat
Resumen del contenido incluido en la página 20
with the message Audio only. Note: Subchannel selections The new standards employed with digital broadcasting make it possible to receive multiple program channels under a single major channel number which can be selected by pressing the digit remote control direct-access channel number entry. Important: After the installation of the TV channels is completed, always make a selection in the Installation menu between Antenna or Cable whether you want to watch Antenna TV channels or Cable
