Resumen del contenido incluido en la página 1
GB
LCD TELEVISION
INSTRUCTION MANUAL
DSL-15D3
DSL-17D3
DSL-20D3
DSL-15D4
DSL-17D4
DSL-20D4
PAL B/G, D/K, I/I,
SECAM B/G, D/K, L/L’, NTSC(AV)
TELETEXT
SCART/VIDEO/S-VIDEO/COMPONENT/PC
MULTI-LANGUAGE OSD
Resumen del contenido incluido en la página 2
Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” with- in the product’s enclosure that may be of sufficient magnitude to constitute a risk electric shock. The exclamation point with
Resumen del contenido incluido en la página 3
Safety Precautions 1. CLEANING Unplug this TV equipment from the AC power outlet before cleaning. Do not use liquid cleaner or aerosol cleaners. Use a soft and damp cloth for cleaning. 2. ATTACHMENTS Do not use attachments not recommended by the TV equipment manufacturer as they may result in the risk of fire, electric shock or other injury. 3. WATER AND MOISTURE Do not place this TV equipment near water, for example, near bathtub, kitchen sink, laundry tub, in a wet basement, or near a swimmin
Resumen del contenido incluido en la página 4
Contents IMPORTANT SAFEGUARDS 5 SUPPLIED ACCESSORIES 6 FUNCTIONAL OVERVIEW 7 Front (Control panel) 7 Remote controller 8 PREPARATION 9 Inserting Batteries into the Remote Control Unit 9 Mains connection 9 Aerial connection 10 Connecting external equipment 12 INSTALLATION 14 Language selection 14 Automatic Tuning of TV Channels 14 Programme Editing 15 Manual Tuning 16 DAILY USE 18 Switching On and Off 18 Recall 18 Programme Selection 19 Picture Control 19 Sound Control 20 Special Features 21 Time
Resumen del contenido incluido en la página 5
Important Safeguards Location Heat, Moisture, Dust, Vibration Position your set so that bright light or sunlight doesn't fall directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Do not expose the set to dripping or splashing. Ventilation Also ensure that the set is placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover. Leave at least 10 cm around each side of the TV se
Resumen del contenido incluido en la página 6
Supplied Accessories Make sure that the following accessories are provided with the product. AC cord AC/DC adapter POWER MUTE PR VOL VOL MENU PC PR 12 3 45 6 78 9 SLEEP NORMAL 0 RECALL ASPECT S.MODE X ? Remote controller Instruction manual Batteries (Option) (2x1.5V, AAA) 6
Resumen del contenido incluido en la página 7
Functional Overview Front (Control panel) PR MENU Power PR Volume AV MENU Remote LED On/Off Up/Down Up/Down sensor indicator 7
Resumen del contenido incluido en la página 8
Functional Overview Remote Controller [ ] : Teletext function POWER MUTE MUTE POWER PR UP (PR UP) [PAGE UP] MENU VOL VOL MENU RIGHT(VOLUME UP) LEFT(VOLUME DOWN) PC PC AV PR DOWN(PR DOWN) [PAGE DOWN] 12 3 45 6 NUMBER[PAGE] 78 9 SLEEP NORMAL 0 SLEEP[SUBPAGE] NORMAL RECALL ASPECT S.MODE RECALL [HOLD] ASPECT[MIX] X ? SOUND MODE[SIZE] [CANCEL] [TELETEXT] [REVEAL] [INDEX] 8
Resumen del contenido incluido en la página 9
Preparation Inserting Batteries into the Remote Control Unit To load the batteries, turn the remote control handset over and open the battery compartment. Insert the batteries (Two 1.5v, type R03 or AAA). Make sure that the polarity matches with the (+) and (-) marks inside of the battery compartment. Note: To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control handset for an extended period of time. Mains Connection 1. Conn
Resumen del contenido incluido en la página 10
Preparation Aerial Connection CONNECTING THE TV DIRECTLY TO AN AERIAL Connect an aerial cable (75 ohm coaxial cable) to the Aerial terminal on the back of the TV set. Aerial Aerial Terminal Aerial cable 10
Resumen del contenido incluido en la página 11
Preparation AERIAL CONNECTION WITH VCR Connect your aerial cable to the RF(aerial) IN terminal on the VCR. Connect the RF OUT terminal of the VCR to the Aerial terminal on the TV set with RF cable. NOTE: If you wish to use only the Aerial (RF) connection, then you should store the VCR channel on programme number “ZERO”using the “Manual tuning”function (See page 16). Now you can watch the VCR in TV mode by selecting the programme number “PR00”. VCR RF IN RF OUT 11
Resumen del contenido incluido en la página 12
Preparation Connecting external equipment PC PC Audio cable PC D-sub cable COMPONENT PC PC INPUT AV 1 AUDIO Pr Pb Y RL Pr Pb Y R L SCART cable Headphone RCA cable S-video cable Set Top Box DVD Set Top Box VCR/DVD VCR/DVD/Camcorder/ Video Game 12 VIDEO2 L AUDIO R S-VIDEO
Resumen del contenido incluido en la página 13
Preparation TV/AV/PC MODE SELECTION Press the TV/AV( ) button on the control panel repeatedly to select the source. You can also select the source using TV/AV( ) button on the remote controller. TV AV1 AV2 S-VIDEO COMPONENT PC TV There is the direct key on the remote controller, PC, for the PC mode. In TV mode, you can change the TV programme number with the PR button or the NUMBER button. NOTE : When the TV SET has no signal, OSD(On Scree
Resumen del contenido incluido en la página 14
Installation Language Selection 1. When you turn on the TV set(see page18) for Language English Picture the first time, the Language menu appears for Time the on-screen display. Sound Osd Translucent Opaque Colour temp Normal If not, Utilities Child lock Off (1) Press the MENU button to call up the menu. Setup (2) Move the selection bar to the Utilities menu with PR button. (3) Press the VOL button. Move Adjust MENU Prev. (4) Move the selection bar to the Language with PR button. 2. Press t
Resumen del contenido incluido en la página 15
Installation 6. Press the VOL button. All available TV channels(CH) are searched for and stored from programme number (PR) 1 onwards automatically. The names of the TV channels ATS 10 % are stored as well if the TV channels broadcast MENU Exit VPS, PDC or Teletext. 7. Please wait until the tuning screen disappears. Programme Editing Select the Edit menu from the Setup menu. DELETING THE PROGRAMME 1. Position the selection bar to the programme to P01 ----- skip Picture P02 ----- sk
Resumen del contenido incluido en la página 16
Installation Manual tuning Select the Manual tuning from the Setup menu. PROGRAMME NUMBER SELECTION Program Pr 1 Picture 1. Position a selection bar to Program. Name ----- 2. Press the VOL buttons to select a Sound Ch S09 System GB programme number you want. Utilities Search Memorize Setup TV SYSTEM SELECTION If necessary, you can change the TV System. 1. Position a selection bar to System. Move Adjust MENU Prev. 2. Select the TV system with VOL button. CHANNEL SEARCH PR Searc
Resumen del contenido incluido en la página 17
Installation Direct Search You can find the desired channel directly without Search function by inputting the channel number. Program Pr 1 Picture Name ----- 1. Place the selection bar to ‘Ch’. Sound Ch S09 2. Press the VOL button of the remote control to System GB Utilities start. Search 3. Using VOL button of the remote control to Memorize Setup select the digit, which you desire to change. 4. By pressing the PR button, you can find Move Adjust MENU Prev. the desired number or character. 5. Fo
Resumen del contenido incluido en la página 18
Daily Use Switching On and Off SWITCHING ON 1. If the Indicator is not lit, then the TV set is powered off. You must press the button on the TV set. The set will switch to stand-by mode and then the Indicator will illuminate in Red. 2. Press the POWER button, PR button or NUMBER button on the remote controller or PR button on the TV set. The TV set will be switched on and then the Indicator will change to Green. SWITCHING OFF 1. Press the POWER button on the re
Resumen del contenido incluido en la página 19
Daily Use Programme Selection The set has 100 programme numbers, PR00..PR99. DIRECT SELECTION The NUMBER buttons are used for direct programme selection. To select a two-digit programme, press the second numbered button within 2 seconds. PR SELECTION You can also select a programme by pressing step by step the PR buttons. Picture Control 1. Select the Picture menu. Brightness 32 Picture 2. Select and adjust the level of each function: Contrast 32 “Brightness”, “
Resumen del contenido incluido en la página 20
Daily Use Sound Control VOLUME CONTROL Adjust the volume with the VOL buttons. Volume 20 MUTE Pressing the MUTE button ( ) turns the sound off. The MUTE symbol will be displayed. The sound returns if the button is pressed once more. SOUND MODE Stereo/Mono sound selection When receiving a Stereo programme, Stereo Pr 12 mode is automatically selected. Stereo In Stereo reception if you are unable to get good sound quality due to poor reception, you can force a change from S
