Resumen del contenido incluido en la página 1
English
Owner’s manual
English Owner’s manual
Thank you for purchasing the Clarion TB741P/TB742P/TB743W.
* Please read this Owner’s manual & Installation manual in its entirety before proceeding with wire
Owner’s manual & Installation manual
connection and installation.
* After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).
Contents
• Owner’s manual
1. CONTROLS ................................................................................................
Resumen del contenido incluido en la página 2
English Owner’s manual English Owner’s manual Thank you for purchasing the Clarion TB741P/TB742P/TB743W. * Please read this Owner’s manual & Installation manual in its entirety before proceeding with wire Owner’s manual & Installation manual connection and installation. * After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Contents • Owner’s manual 1. CONTROLS ................................................................................................
Resumen del contenido incluido en la página 3
English Owner’s manual English Owner’s manual 1. CONTROLS 2. FEATURES Note: Be sure to spread this page and refer to the front diagrams when you read each chapter. 7" Wide (16:9) TFT Active Matrix Color LCD Panel 4 Modes Supported: Cinema, Wide, Full Wide and Normal Wide Viewing Angle, Low Reflection and High-brightness Panel Employed Fully-Motorised Mechanism Preset Tuning (total of 12 stations), Manual Tuning and Automatic Tuning Facilities for Speedy Selection
Resumen del contenido incluido en la página 4
English Owner’s manual English Owner’s manual 1. CONTROLS 2. FEATURES Note: Be sure to spread this page and refer to the front diagrams when you read each chapter. 7" Wide (16:9) TFT Active Matrix Color LCD Panel 4 Modes Supported: Cinema, Wide, Full Wide and Normal Wide Viewing Angle, Low Reflection and High-brightness Panel Employed Fully-Motorised Mechanism Preset Tuning (total of 12 stations), Manual Tuning and Automatic Tuning Facilities for Speedy Selection
Resumen del contenido incluido en la página 5
English Owner’s manual 3. PRECAUTIONS 3. This unit uses a precision mechanism. Even CAUTION in the event that trouble arises, never open For your safety, the driver should not watch the case, disassemble the unit, or lubricate the TV or operate the controls while driving. the rotating parts. Please note that watching and operating the 4. TV broadcast reception TV while driving is prohibited by law in When receiving TV broadcasts, the strength some countries. Also, while driving, keep of the sign
Resumen del contenido incluido en la página 6
English Owner’s manual 4. BUTTON TERMINOLOGY Note: Be sure to read this chapter referring to the front diagrams of chapter “1. CONTOROLS” on page 3 (spread). [OPEN/CLOSE] button [BND] button • Use this button to open/close the liquid crystal • Press this button to switch the receiving panel. bands. • Press and hold this button for about 2 • Press and hold this button for 1 second or seconds or longer so that the liquid crystal longer to turn on/off the monitor. panel is positioned horizontally
Resumen del contenido incluido en la página 7
English Owner’s manual 5. CAUTIONS ON HANDLING For a longer service life, be sure to read the Concerning the LCD screen following cautions. • Be sure to store the LCD panel inside the • Do not leave droplets of water on the LCD source unit when parking the car outdoors panel since they can cause discoloration for long periods of time. and stains. In addition, entry of moisture The LCD panel will operate properly in a inside the unit can cause malfunctioning. temperature range of 0 to 60°C. Any d
Resumen del contenido incluido en la página 8
English Owner’s manual 6. REMOTE CONTROL w a d z Receiver for remote control unit Operating range: 30˚ in all directions Remote control unit Signal transmitter Inserting the Battery [ ] BAND/RTN/ADJ 1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow. [ ] [ ] POWER DISP 2. Insert the AA (SUM-3/1.5V) batteries that came with the remote control unit facing in the directions shown in the figure, then close the rear cover. Notes: Using batteries improperly c
Resumen del contenido incluido en la página 9
English Owner’s manual Functions of Remote Control Unit Buttons [POWER] button • Power on/off. [DISP] button • Showing the information on the screen. • Hold down (for 1 second) to select the screen sizes. [w], [z] buttons • Selecting the preset channel. • Selecting the desired menu in the adjustment menu screen. [BAND/RTN/ADJ] button • Switching the receiving bands. • Change to the previous screen in the adjustment menu screen. • Hold down for 1 second to show the adjustment menu screen. [a], [d
Resumen del contenido incluido en la página 10
English Owner’s manual 20˚ 7. OPERATION Note: Be sure to read this chapter referring to the front Basic Operations diagrams of chapter “1. CONTROL” on page 3 (spread). Standing up the liquid crystal panel CAUTION 1. Press the [OPEN/CLOSE] button and the To prevent the battery from running down, liquid crystal panel comes out and stand up operate the unit while the engine is running automatically. whenever possible. When listening to the sound of TV programs while driving, use a volume setting at
Resumen del contenido incluido en la página 11
English Owner’s manual Basic Operations Note: Turning on and off the monitor • Do not move the liquid crystal panel by hand. 1. Pressing and holding the [BND] button for 1 second or longer turns the monitor off. To To adjust the slide position return to the monitor on, press the [BND] 1. Press and hold the [TILT] button and release button once again. when a beep is heard. ∗ When a button is pressed or during security monitoring, the monitor-off mode is canceled. The liquid crystal panel slides
Resumen del contenido incluido en la página 12
English Owner’s manual Basic Operations Note: Selecting the screen size • When the wide mode or full wide mode is used to Four screen display modes are supported: display a normal 4:3 picture which is not a wide normal, wide, full wide and cinema. picture so that it fills the whole wide TV screen, parts of the picture around the edges will be off Note: the screen or the picture will be distorted on the • The screen mode cannot be selected while the screen. To view original pictures so as to res
Resumen del contenido incluido en la página 13
English Owner’s manual TV Mode Operations Auto store function CAUTION The channels received automatically are For your safety, the driver should not watch automatically stored in the preset channels. the TV or operate the controls while driving. The setting procedure for the preset channels is Please note that watching and operating the the same for TV1 and TV2. TV while driving is prohibited by law in 1. Press the [PS] button for 1 second or longer, some countries. Also, while driving, keep the
Resumen del contenido incluido en la página 14
English Owner’s manual TV Mode Operations Preset scanning Adjusting the brightness and tone 1. Press the [PS] button. of color The stations stored in the preset channels 1. Display the adjustment menu as described are received in sequence at intervals of in the section, “Selecting the adjustment about 5 seconds per station. menu”. 2. Press the [Î] button to display the picture 62 TV1 quality adjustment screen. F.WIDE 1 2 ∗ Hue adjustment is not possible in PAL P.SCAN 3 mode. 4 5 ∗ “HUE” and “COL
Resumen del contenido incluido en la página 15
English Owner’s manual TV Mode Operations ∗ Press the [BND] button when all adjustments Selecting the FM modulator have been made to return to the adjustment frequency (TB741P/TB742P only) menu screen. 1. Display the adjustment menu as described Press the [ADJ] button to return to the normal in the section, “Selecting the adjustment screen mode. menu”. Setting the beep [ ADJ ] MONI ∗ The sound heard when you make operations is called “beep”. The unit can be set up so that it [ ] BEE
Resumen del contenido incluido en la página 16
English Owner’s manual TV Mode Operations Selecting VTR system (NTSC/PAL/ Changing the TV reception area AUTO) (TB741P only) ∗ The factory default setting is “OTHERS”. 1. Display the adjustment menu as described in the section, “Selecting the adjustment 1. Display the adjustment menu as described menu”. in the section, “Selecting the adjustment menu”. VTR N/P NTSC PAL AUTO OTHERS [ AUDIO OUT ] [ TV AREA ] [ AUSTRALIA ] [ ] NEW ZELAND ADJ 2 RTN TV AREA 2. Pre
Resumen del contenido incluido en la página 17
English Owner’s manual 8. TROUBLESHOOTING If you think that something has gone wrong with your unit, check out the following points before requesting servicing. Problem Cause Measure Power does not Fuse is blown. Replace with a fuse of the same amperage. If the turn on. fuse blows again, consult your store of purchase. (No sound is produced.) Incorrect wiring. Consult your store of purchase. Nothing happens The microprocessor has Turn off the power, then press the reset button for when buttons
Resumen del contenido incluido en la página 18
English Owner’s manual Problem Cause Measure The image is not The parking brake is not Check that the parking brake is applied. displayed. pulled. The display is The brightness control is too Adjust the brightness properly. dark. low. The operating condition is The temperature inside the vehicle may be 0˚C or not good. less. Set to an appropriate temperature (25˚C or so) and check it again. The headlight of the vehicle The display is made dark at night to prevent the is lit. glare (When the head
Resumen del contenido incluido en la página 19
English Owner’s manual 9. SPECIFICATIONS LCD Monitor General Screen size: 7-inch wide type (152 mm Power source voltage: DC13.2 V Width ✕ 85 mm Height) (10.8 to 15.6 V) Display method: Transmission type TN liquid Ground: Negative crystal display Current consumption: Less than 2.0 A Drive method: TFT(thin-film transistor) active Weight: 1.75 kg matrix driving Dimensions: 178 mm Width ✕ Pixels: 336.960 (1440 ✕ 234) 50 mm Height ✕ 165 mm Depth TV Tuner Tuning system: PLL synthesizer system Receptio
Resumen del contenido incluido en la página 20
English Owner’s manual 20 TB741P/TB742P/TB743W
