Resumen del contenido incluido en la página 1
LCD TV
Contact SAMSUNG WORLDWIDE
LE32 M8
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Kontakta SAMSUNG
Om du har några frågor eller synpunkter om Samsungs produkter,
är du välkommen att kontakta Samsung Support.
Kontakt SAMSUNG
Hvis du har spørgsmål eller kommentarer vedrørende Samsung produkter,
venligst kontakte Samsung Support.
Kontakt SAMSUNG
Om du har spørsmål eller synspunkter om Samsungs produkter,
er du velk
Resumen del contenido incluido en la página 2
Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. • Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. • W atching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed
Resumen del contenido incluido en la página 3
English Contents ConneCtIng anD PreP arIng Your tV SettIng the SounD List of Parts ........................................................ 3 Changing the Sound Standard ......................... 22 Installing the Stand ............................................. 3 Adjusting the Sound Settings ........................... 23 Installing the Wall Mount Kit ............................... 3 Setting the TruSurround XT (SRS TS XT) ........ 23 Viewing the Control Panel .....
Resumen del contenido incluido en la página 4
uSIng the DtV Feature uSIng the teletext Feature Previewing the DTV Menu System .................. 32 Teletext Decoder .............................................. 46 Updating the Channel List Automatically .......... 33 Displaying the Teletext Information .................. 47 Updating the Channel List Manually ................ 33 Selecting a Specific Teletext Page ................... 47 Editing Your Favourite Channels ...................... 34 Using Fastext to
Resumen del contenido incluido en la página 5
list of Parts Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. M4 X L16 Remote Control Stand Screw & Batteries Power Cord Cover-Bottom Stand Cleaning Cloth X 4 (AAA x 2) Owner’s Instructions Warranty card Safety Guide Registration Cards Warranty card / Safety Guide / Registration Cards (Not available in all locations) Installing the Stand < 2 > < > 1. Place the TV faced down on a soft cloth or cushion on a tabl
Resumen del contenido incluido en la página 6
Viewing the Control Panel 1 2 3 4 6 5 The product colour and shape may vary depending on the model. 1 SourCe 4 Toggles between all the available input Press to change channels. sources (TV, Ext.1, Ext.2, AV, S-Video, In the on-screen menu, use the Component, PC, HDMI1, HDMI2, HDMI3, buttons as you use the 5 and 6 buttons on DTV). In the on-screen menu, use this button the remote control. as you use the enter/oK button on the (Without the Remote Control, you can tur
Resumen del contenido incluido en la página 7
Viewing the Connection Panel 1 2 3 4 5 3 6 @ ! Power Input 09 8 7 The product colour and shape may vary depending on the model. Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable. 1 Connecting Set-t op box, VCr or DVD Connector Input Output Video Audio (L/R) RGB Video + Audio (L/R) EXT 1 o o o Only TV or DTV output is available. o o Output yo
Resumen del contenido incluido en la página 8
4 Connecting an aerial or Cable t elevision network T o view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial / A cable television network / A satellite network 5 Connecting CI (Common Interface) CarD - When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen. - The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displa
Resumen del contenido incluido en la página 9
Viewing the remote Control 1 Selects a target device to be b P : Next channel controlled by the Samsung P : Previous channel remote control (TV, DVD, c Exit the OSD STB, CABLE, VCR) (Refer to page 49~51) d Control the cursor in the menu 2 Television Standby button e Use to see information on 3 Number buttons for direct the current broadcast channel access f Runs the Anynet view 4 One/Two-digit channel functions and sets up Anynet selection devices. 5 It d
Resumen del contenido incluido en la página 10
Installing batteries in the remote Control 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment. . Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV
Resumen del contenido incluido en la página 11
Plug & Play When the tV is initially powered on, several basic settings Plug & Play proceed automatically and subsequently. the following settings are available. Any functions related to Digital TV (DVB) will only work in Start Plug & Play. countries or areas where DVB-T (MPEG2) digital terrestrial oK signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with ente
Resumen del contenido incluido en la página 12
If you want to reset this feature... tV Setup Plug & Play 1. Press the menu button to display the menu. language : english t ime Press the ▲ or ▼ button to select "Setup", then press the game mode : off blue Screen : off enter/oK button. melody : off PC 2. Press the enter/oK button again, to select "Plug & Play". home theatre PC : off more . The message "Start Plug & Play" is displayed. (Refer to page 9) move enter return Plug & Play Start Plug & Play. o
Resumen del contenido incluido en la página 13
Storing Channels manually You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. the programme number of each stored channel which you wish to identify. 1. Press the menu button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the enter/oK button. 2. Press the ▲ or ▼ button to select "Manual Store", then press the enter/oK button. .
Resumen del contenido incluido en la página 14
Setting the Channel lists Set the channels according to your preference. Channel list You can easily delete, add, or lock the channel you want. P 1 C 1 / 10 1. Press the menu button to display the menu. Prog. Press the ▲ or ▼ button to select "Channel", then press the 0 C-- enter/oK button. 1 C 2. Press the ▲ or ▼ button to select "Channel Manager", 2 bbC 1 then press the enter/oK button. C . Press the enter/oK button again, to select "Channel C List".
Resumen del contenido incluido en la página 15
Sorting the Stored Channels You can exchange the numbers of two channels, in order to: tV Channel Country : belgium modify the numeric order in which the channels have auto Store manual Store been automatically stored. Channel manager give easily remembered numbers to the channels Sort name that you watch most often. Fine t une lna : off 1. Press the menu button to display the menu. Press the ▲ or ▼ button to select "Channel", then press th
Resumen del contenido incluido en la página 16
Fine t uning Channel reception use fine tuning to manually adjust a particular channel for tV Channel optimal reception. Country : belgium auto Store 1. Use the number buttons to directly select the channel that manual Store Channel manager you want to fine tune. Sort name 2. Press the menu button to display the menu. Fine t une lna : off Press the ▲ or ▼ button to select "Channel", then press the enter/oK button. move enter return . Press the ▲ o
Resumen del contenido incluido en la página 17
Changing the Picture Standard You can select the type of picture which best corresponds to tV Picture your viewing requirements. mode : Dynamic Contrast 100 1. Press the menu button to display the menu. brightness 0 Sharpness Press the enter/oK button, to select "Picture". Colour t int g0 r0 2. Press the enter/oK button again, to select "Mode". Colour t one : Cool1 Detailed Settings . Press the ▲ or ▼ button to select the desired picture ef
Resumen del contenido incluido en la página 18
Changing the Colour t one You can select the most comfortable colour tone to your tV Picture eyes. mode : Dynamic Contrast 100 1. To select the desired picture effect, follow the brightness 0 Sharpness "Changing the Picture Standard" instructions number 1 to 3. Colour (On page 15) t int g0 r0 Colour t one : Cool1 2. Press the 5 or 6 button to select "Colour Tone", then press Detailed Settings backlight : 10 the enter/oK button. more
Resumen del contenido incluido en la página 19
Configuring Detailed Settings on the Picture You can set detailed picture settings. tV Picture mode : movie 1. Press the menu button to display the menu. Contrast 0 brightness 2. Press the enter/oK button, to select "Picture". Sharpness 10 Colour t int g0 r0 . Press the ▲ or ▼ button to select "Detailed Settings", then Colour t one : Warm2 press the enter/oK button. Detailed Settings backlight : 0 more . Select the required option
Resumen del contenido incluido en la página 20
Changing the Picture Size You can select the picture size which best corresponds to tV Picture your viewing requirements. more Size : auto Wide 1. Press the menu button to display the menu. Screen mode : 1 : 9 Digital nr : off Press the enter/oK button, to select "Picture". active Colour : off Dnle : off 2. Press the ▲ or ▼ button to select "Size", then press the movie Plus : off reset : oK enter/oK button. . Select the required option by pressing the ▲ or ▼ butto
