Manual de instrucciones de Kodak TI2104

Resumen del contenido incluido en la página 1

Kodak EL Camera Film
Technical Information Instruction Sheet – TI2104
August 2006
Features / Customer Product Specifications
• A high-contrast, stabilized gelatin, orthochromatic film for making camera-line or copy-dot negatives
or positives.
• High maximum density.
• Can also be used for making contact negatives and positives.
• Matte level sufficient to permit quick and uniform vacuum drawdown.
• Good reciprocity and latent image keeping characteristics.
• Product can be used

Resumen del contenido incluido en la página 2

Exposure Relative Exposure Index Orientation System Pulsed-Xenon Tungsten or Quartz-Halogen Emulsion exposure ISO/ASA System 5 4 ISO/DIN System 8 7 Exposed through base ISO/ASA System 2 2 ISO/DIN System 5 3 These indexes are provided primarily as indicators of the relative speed of this film when compared with other Kodak graphic arts materials when processed in lith developers. The pulsed-xenon value indica

Resumen del contenido incluido en la página 3

Filter Factors When a filter is used, multiply the unfiltered exposure by the filter factor for the particular filter shown below. Since lighting conditions vary, these factors are only approximate: Orientation Light Source Kodak Wratten Gelatin Filter No. 8 No. 15 No. 47B No. 58 To the emulsion

Resumen del contenido incluido en la página 4

2. RINSE at 65° to 80° F (18° to 27° C) with agitation. Kodak indicator stop bath 10 seconds or diliuted 4% acetic acid solutions 10 seconds 3. FIX at 65° to 80° F (18° to 27° C) with frequent agitation. Kodak RA 3000 fixer and replenisher 1 to 2 minutes Kodak rapid fixer 1 to 2 minutes Kodak fixer 2 to 4 minutes 4. WASH at 65° to 80° F (18° to 27° C) in running water for about 10 minutes. 5. DRY in a dust-free place. Mechanized Processing The recommended starting point for

Resumen del contenido incluido en la página 5

Kodak EL Camera Film Technical Information Data Sheet – TI2104 August 2006 1. Support Dimensionally Stable Support EL Camera film 4 mil (0.004 in., 0.10 mm) Estar base 2. Dimensional Stability Dimensional stability is an all-inclusive term. In photography, it applies to size changes caused by changes in humidity and in temperature, and by processing and aging. The absence of solvent in the Estar base is one of the reasons that Estar base films show excellent dimensional stability.

Resumen del contenido incluido en la página 6

3. Reciprocity With recommended processing, the reciprocity speed change is negligible (1/3-photographic stop or less) within exposure range of 1/1000 second to 100 seconds; there is no change in contrast. 1 4. Graphs Characteristic A. Kodak RA 2000 developer and replenisher, 1:4 (9-94) B. Kodalith Super RT developer (9-94) Spectral Sensitivity B. Kodak RA 2000 developer and replenisher 1:4 (9-94) 1 NOTICE: While the data presented are typical of production coatings, they d

Resumen del contenido incluido en la página 7

Resumen del contenido incluido en la página 8

The Kodak products mentioned in this document may not all be available in all regions or countries. If you have questions or need assistance, contact your local Kodak representative or visit our website: http://graphics.kodak.com. The contents of this publication are subject to change without notice. © Kodak, 2006. Kodak, Estar, and Kodalith are trademarks of Kodak.