Resumen del contenido incluido en la página 1
SERVICE MANUAL
FACSIMILE
GD-1150/1151/1200/1201/1160/1260
Model: GD-1150/1151/1200/1201/1160/1260
Publish Date: Novemver 2003
File No. SME030007F0
R03102142202-TTEC
Ver06_2008-12
Resumen del contenido incluido en la página 2
Trademarks • The official name of Windows 95 is Microsoft Windows 95 Operating System. • The official name of Windows 98 is Microsoft Windows 98 Operating System. • The official name of Windows Me is Microsoft Windows Millennium Edition Operating System. • The official name of Windows 2000 is Microsoft Windows 2000 Operating System. • The official name of Windows XP is Microsoft Windows XP Operating System. • Microsoft, Windows, Windows NT, Windows Vista and the brand names and product names of
Resumen del contenido incluido en la página 3
GENERAL PRECAUTIONS REGARDING THE INSTALLATION AND SERVICE FOR e-STUDIO3511/4511, e-STUDIO281c/351c/451c, e-STUDIO350/352/450/452, e-STUDIO200L/202L/230/230L/232/280/280S/282/282S AND GD-1150/1151/1200/1201/1160/1260 The installation and service should be done by a qualified service technician. 1) Transportation/Installation - Be sure to transport the equipment with the number of people given in the following table holding the positions as indicated below. Pay full attention when h
Resumen del contenido incluido en la página 4
2) Service of Machines - Basically, be sure to turn the main switch OFF and unplug the power cord during service. - Be sure not to touch high-temperature sections such as the exposure lamp, the fuser unit, the damp heater and their periphery. - Be sure not to touch high-voltage sections such as the chargers, transfer belt, 2nd transfer roller, developer, IH control circuit, high-voltage transformer, exposure lamp control inverter, inverter for the LCD backlight and power supply unit. Especial
Resumen del contenido incluido en la página 5
8) Precautions against Static Electricity - The PC board must be stored in an anti-electrostatic bag and handled carefully using a wrist- band, because the ICs on it may become damaged due to static electricity. Caution: Before using the wristband, pull out the power cord plug of the equipment and make sure that there are no uninsulated charged objects in the vicinity. Caution: Dispose of used batteries and RAM-ICs including lithium batteries according to this manual. Attention: Se débarrasser
Resumen del contenido incluido en la página 6
Resumen del contenido incluido en la página 7
CONTENTS GD-1150/1151/1200/1201/1160/1260 1. SPECIFICATIONS AND OUTLINE OF SYSTEM ......................................................... 1-1 1.1 FAX Options ........................................................................................................................ 1-1 1.2 Specifications....................................................................................................................... 1-2 1.3 Features ............................................................
Resumen del contenido incluido en la página 8
GD-1150/1151/1200/1201/1160/1260 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved CONTENTS 2
Resumen del contenido incluido en la página 9
1. SPECIFICATIONS AND OUTLINE OF SYSTEM 1 1.1 FAX Options e-STUDIO3511/4511/350/450/200L/202L/203L/230/232/233/280/282/283 can be used as a FAX by installing the FAX unit (GD-1150/1151). e-STUDIO281c/351c/451c/352/353/452/453 can be used as a FAX by installing the FAX unit (GD- 1200/1201). Some options can be added when the FAX unit is installed or to extend the FAX functions ( P. 1-8 "1.5 Options"). Be sure to use the FAX unit and the 2nd line for the FAX board only in the following combinat
Resumen del contenido incluido en la página 10
1.2 Specifications 1) Main system - Type Desktop type transceiver -Operation Transmission Manual/Automatic Reception Manual/Automatic 2) Scanner [ ]: at rotation transmission - Horizontal direction 16 lines/mm, 8 lines/mm [15.4 lines/mm, 7.7 lines/mm, 3.85 lines/mm] - Vertical direction 15.4 lines/mm, 7.7 lines/mm, 3.85 lines/mm [16 lines/mm, 8 lines/mm] - Combination U-Fine: 16 x 15.4 lines/mm [15.4 x 16 lines/mm] Semi-U-Fine:8 x 15.4 lines/mm [15.4 x 8 lines/mm] Note Note: :
Resumen del contenido incluido en la página 11
3) Transmission system Circuits to be used: Subscriber line/FAX communication network (G3) - Calling automatic transmission (including the sequential multi-address transmission) 1 - Calling automatic reception (polling reception) - Called automatic transmission (polling transmission) - Called automatic reception - Calling manual transmission - Calling manual reception - Called manual transmission - Called manual reception Communication mode High-speed mode (Toshiba original procedure mode) G3 m
Resumen del contenido incluido en la página 12
4) Recording paper - Recording method Electrophotographic recording method by LSU (Laser Scanning Unit) - Horizontal printing density 24 lines/mm (96 lines/mm with the smoothing processing) [23.1 lines/mm (92.4 lines/mm with the smoothing processing)] - Vertical printing density 23.1 lines/mm (24 lines/mm with the smoothing processing) - Recording paper size and the effective printing area Unit: mm (inch) Paper size Dimension (width x length) Printing area A5-R 148 x 210 143 x 204.5 B5-R 182 x 2
Resumen del contenido incluido en la página 13
1.3 Features • A3/LD scanning 1 Scans data across A3/LD width and transmits in A3/LD actual size. • High-speed scanning Inputs an A4/LT-size transmitted document in about 0.7 seconds (A4/LT document transmitted widthwise). • High-speed transmission 33.6 Kbps high speed modem Toshiba original high-speed communication modes EX and HS JBIG encoding system • Dual Access - FAX transmission There are two types of FAX transmission: Page-by-page direct transmission and memory trans- mission that all pa
Resumen del contenido incluido en la página 14
• Phone Book (1,000 addresses) Up to 1,000 addresses can be registered in the Phone Book using the large LCD control panel. • Multi-address transmission function Data are sent to multiple addresses (400 destinations) in sequence in a single operation. There are three ways to choose/enter the address - Choose from the Phone Book (up to 400 destinations) - Direct dialing (up to 400 destinations) - Mix operation (Phone Book, Direct dialing, Group destinations: up to 400 destinations) • Memory recep
Resumen del contenido incluido en la página 15
1.4 Accessories and Parts The following accessories and parts come with the FAX unit: 1 Accessory Qty Operator’s manual (for facsimile function) 1 pc. Modular cord (2 m) 1 pc. Unpacking instruction 1 set Parts Qty Fax unit 1 pc. SG3 label 1 pc. FCC Part 68 label (U.S.A.): NA only 1 pc. IC label (Canada): NA only 1 pc. DTS label (EU): EU only 1 pc. Teleprompt label (New Zealand): AU only 1 pc. Notice to users label (New Zealand): AU only 1 pc. Screw 4 pc. Ground plate 1 pc. * Apply the each label
Resumen del contenido incluido en la página 16
1.5 Options Extends the FAX functions when the FAX unit is installed. e-STUDIO3511/4511/350/450 Option Function Model Reversing Automatic Feeds originals MR-3015 Document Feeder (RADF) Finisher Sorts out documents to be output for the MJ-1022 FAX/copying operation (e-STUDIO3511/350) MJ-1023/1024 2nd line for FAX board Adds one extra communication line GD-1160NA/TW/EU/C Job Separator Sorts out documents to be output for the MJ-5004 FAX/copying operation e-STUDIO230/280 Option Function Model Rever
Resumen del contenido incluido en la página 17
e-STUDIO352/353/452/453 Option Function Model 1 Reversing Automatic Feeds originals MR-3018 Document Feeder (RADF) Finisher Sorts out documents to be output for the MJ-1022/1101 FAX/copying operation (e-STUDIO352) MJ-1023/1024 2nd line for FAX board Adds one extra communication line GD-1160NA/TW/EU/C GD-1260NA/TW/EU/C Job Separator Sorts out documents to be output for the MJ-5004 FAX/copying operation e-STUDIO202L/203L/232/233/282/283 series Option Function Model Reversing Automatic Feeds origin
Resumen del contenido incluido en la página 18
1.6 System List e-STUDIO3511/4511/350/450 Finisher ( ) Hanging type e-STUDIO3511/350 only MJ-1022 Reversing Automatic Document Feeder MR-3015 Finisher ( ) Console type MJ-1023 Finisher ( ) Console saddle stitch type MJ-1024 Bridge Kit KN-3511 e-STUDIO3511/4511 only FAX Board GD-1150NA/TW/EU Job Separator /AU/AS/C MJ-5004 e-STUDIO350/450 2nd Line for FAX Board only GD-1160NA/TW/EU/C Bridge Kit KN-3520 e-STUDIO350/450 only Drawer Module Desk Paper Feed Large Capacity MY-1021 Pedestal (PFP) Feeder
Resumen del contenido incluido en la página 19
e-STUDIO230/280 Finisher 1 Reversing Automatic ( ) Hanging type Document Feeder MJ-1022 MR-3016 Finisher ( ) Console saddle stitch type Bridge Kit MJ-1025 KN-3520 FAX Board Job Separator GD-1150NA/TW/EU MJ-5004 /AU/AS/C 2nd Line for FAX Board GD-1160NA/TW/EU/C Drawer Module Paper Feed Large Capacity Desk MY-1021 Pedestal (PFP) Feeder (LCF) MH-1700 KD-1012 A4/LT KD-1011 Fig. 1-2 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved GD-1150/1151/1200/1201/1160/1260 SPECIFICATIONS AND OUTLINE
Resumen del contenido incluido en la página 20
e-STUDIO281c/351c/451c Finisher ( ) Hanging type e-STUDIO281c/351c only MJ-1022 Reversing Automatic Document Feeder MR-3018 Finisher ( ) Console type MJ-1023 Finisher ( ) Console saddle stitch type MJ-1024 Bridge Kit KN-3511 FAX Board FAX Board GD-1200 GD-1201 2nd Line for 2nd Line for FAX Board FAX Board GD-1160 GD-1260 Drawer Module Paper Feed Large Capacity Desk MY-1021 Pedestal (PFP) Feeder (LCF) MH-1700 KD-1012 A4/LT KD-1011 Fig. 1-3 GD-1150/1151/1200/1201/1160/1260 © 2003 - 2008 TOSHIBA
