Manual de instrucciones de Metra Electronics 99-8157B

Resumen del contenido incluido en la página 1

INSTALLATION INSTRUCTIONS FOR PART 99-8157B
APPLICATIONS
LEXUS SC SERIES
1992-2000
99-8157B
KIT FEATURES
• ISO Mount Radio Provision With Pocket
• Painted Black To Match Factory Dash
KIT COMPONENTS
A) Radio Housing With Pocket • B) Housing Brackets • C) (4) #8 X 3/8” Phillips Screws
A B C
TOOLS REQUIRED:
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver • Socket Set
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2008 METRA ELECTRONICS CORPORATION

Resumen del contenido incluido en la página 2

99-8157B TABLE OF CONTENTS Dash Disassembly - Lexus SC Series 1992-2000 . . . . . . . . . . . . . . . . . . . . . . . . . . 1,2 Kit Assembly - ISO Mount Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . . 3 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 *Note: Refer also to the instructions included with the aftermarket radio. KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the mo

Resumen del contenido incluido en la página 3

99-8157B DASH DISASSEMBLY LEXUS SC SERIES 1992-2000 A 1 Disconnect the negative battery ter- minal to prevent an accidental short circuit. 2 Push down on collar around base of shift knob then remove (2) Phillips screws then pull up on knob to remove. (Figure A) 3 Unclip and remove the shifter trim panel. Tip: Start at the front with ashtray open. (Figure B) 4 Open cup holder lid then unclip and remove the cup holder. Continued on page 2. B 1

Resumen del contenido incluido en la página 4

99-8157B DASH DISASSEMBLY LEXUS SC SERIES 1992-2000 C 5 Remove (6) Phillips screws securing the upper console trim panel then unclip and remove the panel. (Figure C) 6 Remove (8) screws securing the radio and climate control assembly. 7 Remove (4) screws securing the climate controls to the bracket assembly and remove the climate controls. (Retain the screws and cli- mate controls for reuse during kit assembly) (Figure D) Continue to kit assembly. D 2

Resumen del contenido incluido en la página 5

99-8157B KIT ASSEMBLY LEXUS GS SERIES 1992-2000 ISO MOUNT RADIO PROVISON WITH POCKET Note: Refer also to the instructions included with the aftermarket radio. A 1 Attach the Housing Brackets to the Radio Housing using the (4) #8 X3/8” Phillips screws. (Figure A) 2 Position the factory climate controls into the bracket/radio housing assembly and secure using the factory hardware. (Figure B) 3 Slide the aftermarket radio into the bracket/radio housing assembly and secure the radio to the assem

Resumen del contenido incluido en la página 6

99-8157B FINAL ASSEMBLY FINAL ASSEMBLY A (A) Strip wire ends back 1/2" B B) Twist ends together C) Solder D) Tape C D 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individ- ually tape off the ends of any unused wires to prevent electrical short circuit.) 2 Re-connect the negative battery terminal and test the unit for proper operation. 3 Reassemble radio and dash assemblies in reverse order of disa

Resumen del contenido incluido en la página 7

99-8157B NOTES 5

Resumen del contenido incluido en la página 8

99-8157B INSTRUCTIONS www.metraonline.com 1-800-221-0932 REV. 12/22/08 © COPYRIGHT 2008 METRA ELECTRONICS CORPORATION INST99-8157B